UXCELL 8421 code switch

Contents

UXCELL DIP Switches BCD Code Thumbwheel Switch Instruction Manual

Model: 8421 code switch

1. Product Overview

The UXCELL BCD Code Thumbwheel DIP Switch (Model: 8421 code switch) is a compact electronic component designed for precise digital input. It allows selection of a single digit from 0 to 9, offering both increasing and decreasing sequence changes. This type of switch is commonly utilized in the design of accounting systems and other applications requiring high-precision calculations, leveraging BCD codes to maintain value accuracy and optimize computational efficiency.

Each package contains 20 individual DIP switches, which require assembly for use. The assembly process is straightforward and suitable for DIY enthusiasts.

Twenty black DIP switches arranged in a grid
Black DIP Switches (20 Pcs)
Twenty cream-colored DIP switches arranged in a grid
Cream DIP Switches (20 Pcs)

2. Safety & Warnings

Please read all instructions carefully before use to ensure safety and prevent damage to the product or injury.

  • Warning: Keep the device and its cord (if applicable) out of reach of children under 3 years old.
  • Keep away from water, dust, and corrosive substances to prevent short circuits and damage.
  • Do not disassemble the product randomly. Always turn off power before any maintenance.
  • Store in a dry, cool place and avoid heavy impact.

3. Setup & Installation

The DIP switches are designed for easy integration into electronic circuits. Follow these guidelines for proper setup:

  1. Assembly: The switches are provided in a pack of 20 and require assembly. The design facilitates easy DIY assembly.
  2. Circuit Integration: Install the switch correctly according to your circuit diagram.
  3. Connection: Ensure a tight and secure connection to the circuit board to prevent intermittent operation or electrical issues.
Bottom view of a black DIP switch showing the pins for circuit board mounting
Black DIP Switch Bottom View (Pins)
Bottom view of a cream-colored DIP switch showing the pins for circuit board mounting
Cream DIP Switch Bottom View (Pins)

4. Operating Instructions

The DIP switch allows for simple digital input selection:

  • Digit Selection: Use the thumbwheel mechanism to select a single digit from 0 to 9.
  • Sequence Change: The switch supports two change sequences, allowing for either increasing or decreasing digital values.
  • Activation: Press lightly to turn the switch on or off. Avoid using excessive force, which could damage the mechanism.
Close-up of a black DIP switch showing numbers 0 through 9 on the thumbwheel
Black DIP Switch Digit Display
Close-up of a cream-colored DIP switch showing numbers 0 through 9 on the thumbwheel
Cream DIP Switch Digit Display

5. Maintenance

To ensure the longevity and proper functioning of your DIP switches, follow these maintenance guidelines:

  • Cleaning: Keep the switches free from dust and debris. Use a soft, dry cloth for cleaning. Avoid liquid cleaners.
  • Environment: Operate and store the switches in a dry, cool environment, away from water and corrosive substances.
  • Handling: Avoid heavy impact or dropping the switches, as this can cause internal damage.
  • Disassembly: Do not attempt to disassemble the switches for maintenance unless you are a qualified technician. Always disconnect power before any maintenance.

6. Troubleshooting

No specific troubleshooting steps are provided for this product. If you encounter issues, please ensure proper installation and connection as described in Section 3. Verify that the power supply to your circuit is correct and stable. If problems persist, consult a qualified electronics technician.

7. Specifications

Feature Detail
Product Name DIP Switch
Type BCD Code
Model 8421 code switch
Digital Range 0-9
Main Material Plastic, Metal
Dimensions (LxWxT) 30 x 18 x 8 mm
Switch Type Touch On/Off Switch
EU LVD Voltage Low voltage: Below 50Vac or 75Vdc
Current Other
Certification NONE
Is Smart Device No
Origin Mainland China
Black DIP switch with dimensions labeled as 30mm length, 18mm width, and 8mm thickness
Black DIP Switch Dimensions
Cream-colored DIP switch with dimensions labeled as 30mm length, 18mm width, and 8mm thickness
Cream DIP Switch Dimensions

8. Warranty & Support

This product comes with a 365-day warranty from the date of purchase.

Manufacturer Information:

  • Manufacturer: Guangzhou Dajiali Network Technology Co., Ltd.
  • Address: B395, Room 106, Rulin Street, Tianhe, Guangzhou, China
  • Email: udb7910@126.com

EU Authorized Representative:

  • Representative: SUCCESS COURIER SL
  • Address: CALLE RIO TORMESNUM.1, PLANTA1, DERECHAOFICINA 3Fuenlabrada, Madrid, 28947 Spain
  • Email: successservice2@hotmail.com

For further detailed information, a comprehensive user manual in PDF format is available here.

9. User Tips

No specific user tips were available from reviews or Q&A for this product.

10. Frequently Asked Questions (FAQ)

No frequently asked questions were available for this product.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.