1. Introduction
This manual provides detailed instructions for the LILYGO® TTGO T7 Mini32 V1.5 ESP32-WROVER-E Dual Core PSRAM Wireless Wi-Fi Bluetooth Module Development Circuit Board. It covers hardware specifications, setup, operation, and troubleshooting to help you effectively use your development board.

2. Specifications
The LILYGO® TTGO T7 Mini32 V1.5 is a compact and powerful development board based on the ESP32-WROVER-E module. It integrates Wi-Fi and Bluetooth for versatile connectivity.
2.1 Hardware Specifications
| Feature | Description |
|---|---|
| Chipset | ESPRESSIF-WROVER-E 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor |
| FLASH | QSPI flash 4MB / 16MB (depending on model) / PSRAM 8MB |
| SRAM | 520 kB SRAM |
| Button | Reset |
| Modular interface | UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO, ADC, DACLNA pre-amplifier |
| On-board clock | 40MHz crystal oscillator |
| Working voltage | 2.7V-3.6V |
| Working current | About 30mA |
| Working temperature range | -40℃ ~ +85℃ |
| Size & weight | 40.27mm*31.07mm*8.13mm (6.42g) |
| Serial Chip | CH9102 (Some models may use CP2104) |
2.2 Power Supply Specifications
| Feature | Description |
|---|---|
| Power Supply | USB 5V/1A |
| Charging current | 500mA |
| Battery | 3.7V lithium battery |
| Battery connector | Jst 2pin 1.25mm |
2.3 Wi-Fi Specifications
| Feature | Description |
|---|---|
| Standard | FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC (ESP32 chip) |
| Protocol | 802.11 b/g/n (802.11n speed up to 150Mbps) A-MPDU and A-MSDU polymerization, support 0.4μS Protection interval |
| Frequency range | 2.4GHz~2.5GHz (2400M~2483.5M) |
| Transmit Power | 22dBm |
| Communication distance | 300m |
2.4 Bluetooth Specifications
| Feature | Description |
|---|---|
| Protocol | Meet Bluetooth v4.2BR/EDR and BLE standard |
| Radio frequency | With -97dBm sensitivity NZIF receiver Class-1, Class-2 & Class-3 emitter AFH |
| Audio frequency | CVSD & SBC audio frequency |
2.5 Software Specifications
| Feature | Description |
|---|---|
| Wi-Fi Mode | Station/SoftAP/SoftAP+Station/P2P |
| Security mechanism | WPA/WPA2/WPA2-Enterprise/WPS |
| Encryption Type | AES/RSA/ECC/SHA |
| Firmware upgrade | UART download/OTA (Through network/host to download and write firmware) |
| Software Development | Support cloud server development /SDK for user firmware development |
| Networking protocol | IPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT |
| User Configuration | AT + Instruction set, cloud server, android/iOS app |
| OS | FreeRTOS |
2.6 Physical Dimensions

3. Setup
This section guides you through the initial setup of your LILYGO TTGO T7 Mini32 V1.5 development board.
3.1 Package Contents
Ensure all items are present in your package:
- 1 x T7 Mini32 (4MB or 16MB version)
- 6 x Pin headers (for external connections)
- 1 x Connection line (e.g., USB cable or battery cable)

3.2 Pinout Diagram and GPIO Changes
Refer to the pinout diagram for proper connection of external components and power. Note the changes in GPIO assignments for V1.5:
Compared to T7 V1.4, the V1.5 version has replaced GPIO16 and GPIO17 (which could no longer be used for external expansion) with GPIO25 and GPIO27. These new pins can be used with defined functions, ensuring compatibility with miniD1 expansion boards.


3.3 Initial Power-Up
- Connect the board to a 5V/1A USB power source using a compatible USB cable.
- Alternatively, connect a 3.7V lithium battery to the Jst 2pin 1.25mm battery connector.
- The board should power on, indicated by any onboard LEDs.
4. Operating Instructions
This section covers the basic operation and programming of your development board.
4.1 Software Development Environment
The board supports various software development approaches:
- Firmware Development: Utilize the provided SDK for user firmware development.
- Cloud Server Development: Integrate with cloud platforms for IoT applications.
- User Configuration: Use AT commands, instruction sets, or dedicated Android/iOS apps for configuration.
- Operating System: The board runs FreeRTOS.
For detailed examples and resources, refer to the official GitHub repository: https://github.com/LilyGO/TTGO-T7-Demo
4.2 Firmware Upload
Firmware can be upgraded via UART download or Over-The-Air (OTA) updates. For UART download, connect the board to your computer and use a compatible flashing tool. OTA updates can be performed through a network or host to download and write firmware.
4.3 Wi-Fi and Bluetooth Connectivity
The ESP32-WROVER-E module provides robust Wi-Fi and Bluetooth capabilities. You can configure the Wi-Fi in Station, SoftAP, SoftAP+Station, or P2P modes. Bluetooth supports v4.2BR/EDR and BLE standards.
5. Maintenance
To ensure the longevity and optimal performance of your LILYGO TTGO T7 Mini32 V1.5 board, follow these maintenance guidelines:
- Storage: Store the board in a dry, anti-static environment when not in use.
- Cleaning: Use a soft, dry brush or compressed air to remove dust. Avoid liquids or harsh chemicals.
- Temperature: Operate and store within the specified working temperature range of -40℃ to +85℃.
- Power Supply: Always use a stable 5V/1A USB power supply or a 3.7V lithium battery. Incorrect voltage can damage the board.
6. Troubleshooting
If you encounter issues with your LILYGO TTGO T7 Mini32 V1.5, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Board does not power on | Incorrect power supply, faulty cable, or damaged board. | Verify power source (5V/1A USB or 3.7V battery). Check USB cable for damage. Ensure battery is charged and correctly connected. |
| Firmware upload fails | Incorrect drivers, wrong port selected, or corrupted firmware file. | Install necessary USB-to-Serial drivers (e.g., for CH9102). Select the correct COM port in your IDE. Try a different USB cable or port. Ensure firmware file is valid. |
| Wi-Fi/Bluetooth not connecting | Incorrect network credentials, out of range, or software configuration error. | Double-check Wi-Fi SSID and password. Ensure the device is within range of the access point. Review your code for correct Wi-Fi/Bluetooth initialization and connection logic. |
| Unexpected behavior or crashes | Software bugs, memory issues, or hardware malfunction. | Review your code for errors. Check for memory leaks or stack overflows. Use the reset button to restart the board. If persistent, try reflashing known good firmware. |
7. User Tips
Based on user feedback and common questions, here are some tips for getting the most out of your LILYGO TTGO T7 Mini32 V1.5:
- GPIO Compatibility: Be aware of the GPIO changes from V1.4 to V1.5. The new V1.5 uses GPIO25 and GPIO27 for external expansion, which are compatible with miniD1 expansion boards.
- Development Resources: The official GitHub repository (https://github.com/LilyGO/TTGO-T7-Demo) is an excellent resource for examples and documentation.
- Purpose: This board is a microcontroller designed for mobile automation and control systems, offering connectivity via Bluetooth or Wi-Fi.
8. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact LILYGO Official Store customer service. Ensure you check the package and product upon receipt. If there are any issues or damage due to external force, provide clear pictures of the logistics label, carton/bag, and the damaged product for a satisfactory solution.
For customization or bulk orders, or any other questions, feel free to contact customer service.
