1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your DOOYA DT82TV Motorized Electric Curtain Rail. The DT82TV motor combines functions found in both DT82TN and KT82TS models, offering advanced features for automated curtain control. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Product Features
- Elegant Operation Function: DC curtain motor with light open and light close function. Speed slows down when starting and nearing limit positions for smoother operation.
- Electronic Memory Limit Function: No manual limit setting required. The motor automatically shortens debugging time and maintains precise limit positions.
- Built-In Receiver Function: Compatible with various Dooya emitters and group systems.
- Resistance and Stop Function: Automatically stops if resistance is met (e.g., pulling the curtain by hand, encountering an obstacle) to prevent damage.
- Light Touch-Start Function: Gently pulling the curtain will initiate automatic opening or closing until fully opened or closed.
- Power Off Manual Function: Allows manual operation of the curtain by lightly pulling it when power is off.
- Smart Home Connection: Connects with smart home systems for integrated curtain control.
- Compatible and Multiple Function: Compatible with various control systems such as dry-contact, RS232/RS485, and Infrared Control.
- Long Lifetime, Durable In Use: Utilizes a high-strength synchronous belt with anti-aging and acid-resistance, designed for over 15,000 uses, equating to a 20-year lifespan with typical use.
- Silent Design: Adopts sound insulation design to reduce noise to less than 35dB.


3. Components Overview
The DOOYA DT82TV system includes the following main components:
- DT82TV Motor (5-wire)
- Curtain Track (Aviation aluminum, lightweight, high strength)
- Silenter Master Carrier (Special for S-type wave curtain)
- Strong and Silent Belt (Built-in Molybdenum wires, 6 wires/group x 7 groups for long service life)
- Silent Runners (Strong, enduring, 8cm between two rollers)
- Curtain Tape (14.5cm between two rollers)
- Wall Brackets (for side installation)
- Ceiling Brackets (for ceiling installation)
- Remote Control (Emitter)


4. Installation
4.1. Measurement
Accurate measurement is crucial for proper installation. The width refers to the end-to-end width of the track.
- Straight Track: Measure the length (L) of your window. The track length will be L-2CM for inside mount or L+80CM for outside mount.
- L-shaped, U-shaped, Ladder-shaped Tracks: Measure each segment (e.g., AD + AB + BC).


4.2. Track Assembly
If your track comes in multiple pieces, follow these steps to assemble:
- Unfold the folded track.
- Combine the track slowly.
- Push the connection bracket to the connection part.
- Screw the connection bracket and install the slip parts.
- Ensure the track is successfully assembled.

4.3. Bracket Installation
Choose between ceiling or side (wall) installation based on your preference and window type.
- Ceiling Installation: Use ceiling brackets to mount the track directly to the ceiling.
- Side Installation: Use wall brackets to mount the track to the side wall.

4.4. Motor and Cable Installation
- Check the position of brackets, fix them at an appropriate place on the track.
- Assemble the curtain motor track at the appropriate place, then fix with screws.
- Assemble the motor.
- Please check assembling is OK.
- Finish assembling.

4.5. Strong Electric Switch Installation and Wiring
Important: The Neutral line and the Live line cannot be reversed. If any spare wire is exposed, use a pressure line cap and ensure proper insulation.
Strong Electric Switch Mode 1 & 3 Wiring:
- Blue = Neutral
- Black = Down
- White = Up
- Brown = Live
- Green/Yellow = Earth
Strong Electric Switch Hotel Mode Wiring:
- Blue = Neutral
- Black = NC (Not Connected)
- White = Hotel Mode
- Brown = Live
- Green/Yellow = Earth

5. Operation
5.1. Opening Ways
The system supports two primary opening configurations:
- One-Way Draw (Side Opening): Curtains open from one side to the other.
- Two-Way Draw (Center Opening): Curtains open from the center to both sides.
The motor can be installed on either the left or right side, depending on your preference and track configuration.

5.2. Control System Setup (Emitter)
The following steps outline how to set up and program your emitter (remote control) with the motor.
5.2.1. Emitter Setup (Method 1)
- On the motor, press the Setting button for 5 seconds. The LED will flash 5 times.
- On the emitter, press the Open button once. The LED on the motor will flash once.
- The motor LED will flash 5 times, then turn off, indicating successful setup. The Open button now controls the motor clockwise.
- To set the Close button, repeat steps 1-2, but press the Close button on the emitter. The Close button will then control the motor clockwise.
5.2.2. Emitter Setup (Method 2 - Adding an Emitter)
This method is used to add a new emitter to an already configured motor.
- On an existing, paired emitter, press the Setting button once. The LED will flash once.
- On the new emitter, press the Setting button once. The LED will flash slowly.
- The motor LED will flash 5 times, indicating the new emitter is successfully added.
5.3. Reverse Direction Setting
If the emitter's open button causes the curtain to close, you need to reverse the direction.
- On the motor, press the Setting button for 2 seconds. The LED will flash once, then hold.
- On the emitter, press the Down button once. The LED on the motor will flash 5 times, then turn off.
- The direction is now successfully changed.
5.4. Set and Cancel Limit Position
You can adjust the limit points after they have been set. The manual set limit should not be longer than the auto-set limit. If the manual set limit is faulty, repeat the setting procedure to delete and reset.
Before setting limits, ensure the emitter's open button works correctly; if not, change the direction first.
- Manual Open Limit Setting: Press Emitter Setting button (LED flashes once) + Up button (LED flashes once) + Up button (LED flashes 5 times).
- Manual Close Limit Setting: Press Emitter Setting button (LED flashes once) + Down button (LED flashes once) + Down button (LED flashes 5 times).
- Automatic Limit Setting: Press Emitter Open button once (curtain opens) + Close button once (curtain closes). The motor will automatically set the limit positions. (Delete existing limits before setting new ones).
- Cancel Limit: Press Emitter Setting button (LED flashes once) + Setting button (LED flashes once) + Setting button (LED flashes 5 times, then off).
5.5. Third Limit Setting
This feature allows setting an additional intermediate stop position.
- Set Third Limit: Move the blinds to the desired position. Press Emitter Setting button (LED flashes once) + Stop button (LED flashes once) + Stop button (LED flashes 5 times, then off).
- Clear Third Limit: Long press the Stop button for 2 seconds. The blind will move to the third limit automatically.
5.6. RS485 Programming
The programming of the RS485 must be finished within 10 seconds.
- Power on the motor.
- Press the Setting button for 5 seconds. The LED will flash twice, then hold.
- Send the ID signal through the RS485 system terminal.
- The motor LED will flash 5 times, then turn off, indicating successful programming.
5.7. External Switch Selection
The motor supports various external switch types:
- Double-button reboundable switch: Set by pressing motor Setting button 2 times.
- Double-button switch: Set by pressing motor Setting button 3 times.
- Single-button cyclic switch: Set by pressing motor Setting button 4 times.
After pressing the motor Setting button the specified number of times, press the emitter button once. The motor LED will flash 5 times, indicating successful setting.
6. Maintenance
- Regularly inspect the track for any obstructions or debris that might hinder smooth operation.
- Keep the curtain fabric clean according to its care instructions.
- Do not force the curtain manually when the motor is engaged, as this can damage the track and fabric.
- If the motor experiences thermal protection due to long operation, allow it to cool down for 30 minutes before resuming use.
7. Common Troubleshooting
| No. | Common Faults | Processing Method |
|---|---|---|
| 1 | The motor is not running | 1. Check the power supply; 2. Long time operation may cause motor thermal protection, wait 30 minutes. |
| 2 | Unable to control with remote controller | 1. Replace the remote control; 2. Replace the remote control battery. |
| 3 | Remote control direction is contrary | Execute the reverse of direction setting (Section 5.3). |
| 4 | Remote switch direction is contrary | Swap the switch line order. |
| 5 | Cannot close fully | 1. Check emitter's open button to ensure if it works with open function, if not, change direction first; 2. Check limit position. |
| 6 | Always hits or couldn't get to the edge | Cancel the limit, then set it again (Section 5.4). |
| 7 | Feeling stuck when pulling by hand | Set the limit of the trip (Section 5.4). |
| 8 | Does not stop when encountering obstacles | Check the screw used to fix the orbital. |
8. Specifications
| Feature | DT82TV |
|---|---|
| Type | Curtain |
| Style | Curtain |
| Material | Metal (Track: Aviation Aluminum) |
| Opening and Closing Method | Left and Right Biparting Open (Two-way draw) or One-way draw |
| Installation Type | Exterior Installation (Wall brackets) or Ceiling Installation (Ceiling brackets) |
| Applicable Window Type | All windows |
| Format | Electric |
| Pattern Type | Vertical |
| Technics | Flat Plate |
| Voltage | 110V, 230V (AC100-240V) |
| Motor Wires | 5 wires |
| Silent Function | ≤ 28Db |
| Built-in Transformer | Yes |
| Electric Limit | Yes |
| Obstruction Detection | Yes |
| Manual Override | Yes |
| Light-touch Start | Yes |
| Third Limit | Yes |
| Dry Contactor | Yes |
| Weak Current Switch Control | Yes |
| Strong Current Switch Control | Yes |
| Built-in Receiver | Yes |
| Radio Control | 433MHz |
| Optional Timer | Available |
| Optional Sunlight Sensor | Available |
| Curtain Tape Spacing | 14.5cm between two rollers |
| Silent Runner Spacing | 8cm between two rollers |
| Is Customized | Yes |

9. User Tips
- Smart Home Integration: The DT82TV motor supports RS485 control. While KNX actuators are not directly mentioned, compatibility might be achieved through an RS485 to KNX gateway if available. Consult with a smart home professional for integration.
- Track Customization: The track width is customizable. Ensure you provide the exact desired width when ordering to receive the correct track length.
10. Warranty and Support
The DOOYA DT82TV Motorized Electric Curtain Rail comes with a 5-year warranty. For technical support or warranty claims, please contact your retailer or the manufacturer directly.
A detailed user manual in PDF format is available for download: User Manual (PDF)
11. Important Notes
- Always ensure the power supply is disconnected before performing any installation or maintenance.
- Do not attempt to repair the motor or track components yourself if you are not qualified. Contact professional service.
- Keep children and pets away from the motorized curtain system during operation.
- The manufacturer does not guarantee UL approval for the US market based on the provided information. Please verify local certifications if required.