TECNR MT8106IP MT8106IQ

Contents

WEINVIEW HMI Touch Screen User Manual

Models: MT8106IP, MT8106IQ, MT6103iP, MT8102iP, MT6102iQ, MT8102iQ

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your WEINVIEW HMI (Human Machine Interface) Touch Screen. These devices are designed for industrial control applications, offering a user-friendly interface for monitoring and controlling various processes. Please read this manual thoroughly before operating the device to ensure safe and efficient use.

Front view of the WEINVIEW HMI Touch Screen
Figure 1: Front view of the WEINVIEW HMI Touch Screen, showing the 10.1-inch display.

2. Specifications

The WEINVIEW HMI Touch Screen models offer robust performance for industrial environments. Key specifications are detailed below:

FeatureDescription
Brand NameTECNR
Model NumberMT6103iP, MT8102iP, MT8106IP, MT8106IQ
CertificationCE
OriginMainland China
Display Size10.1"
Resolution1024*600
Processor32-bit 800MHz RISC
Memory128M FLASH, 128M RAM
COM PortsPLC RS232 / 485
High-concerned chemicalNone
Package Dimensions30cm (L) x 26cm (W) x 14cm (H)
Package Weight2.0 kg

3. Setup and Installation

Proper installation is crucial for the reliable operation of your HMI. Follow these steps carefully:

  1. Panel Mounting: The HMI is designed for panel mounting. Ensure the cutout dimensions in your control panel match the HMI's specifications. Secure the HMI using the provided mounting clips or screws.
    Side view of the HMI showing mounting brackets and ports
    Figure 2: Side view of the HMI, illustrating the mounting points and various ports.
  2. Power Connection: Connect the HMI to a stable 24V DC power supply. Refer to the wiring diagram on the back of the unit for correct polarity.
    • MT6103iP: Connect power to the green terminal block.
    • MT8102iP/MT8106IP/MT8106IQ: Connect power to the green terminal block.
  3. Communication Connections:
    • Serial Communication (RS232/RS485): Use the COM A and COM B ports for connecting to PLCs or other industrial devices. The specific pinout and wiring will depend on your PLC and communication protocol.
    • Ethernet (LAN): For models MT8102iP, MT8106IP, and MT8106IQ, connect an Ethernet cable to the LAN port for network communication.
    • USB Ports: Use the USB ports for data transfer, project uploads, or connecting peripherals.
    Rear view of MT6103iP HMI showing COM A, COM B, USB, and power ports
    Figure 3: Rear view of the MT6103iP model, highlighting the COM A (DB9), COM B (DB9), USB, and power input terminals.
    Rear view of MT8102iP HMI showing COM A, COM B, LAN, USB, and power ports
    Figure 4: Rear view of the MT8102iP model, showing COM A (DB9), COM B (DB9), LAN, USB, and power input terminals.
  4. Software Configuration: Before operation, you will need to upload your HMI project using the appropriate WEINVIEW configuration software (e.g., EasyBuilder Pro). Connect the HMI to your PC via USB or Ethernet and follow the software instructions for project transfer.

4. Operating Instructions

Once the HMI is powered on and configured with your project, it is ready for operation:

  • Power On/Off: Apply power to the HMI. The device will boot up and load the configured project automatically. To power off, disconnect the power supply.
  • Touch Screen Interface: Interact with the HMI using the touch-sensitive display. Navigate through screens, input data, and control connected devices as defined in your HMI project.
  • Monitoring: The HMI displays real-time data from your connected PLC or other devices. Monitor process variables, alarms, and system status.
  • Control: Use the on-screen buttons, sliders, and input fields to send commands and control parameters to your industrial equipment.
  • Alarm Management: Acknowledge and manage alarms directly from the HMI interface.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your HMI:

  • Cleaning:
    • Gently wipe the touch screen with a soft, lint-free cloth.
    • For stubborn marks, use a mild, non-abrasive screen cleaner. Do not spray cleaner directly onto the screen; apply it to the cloth first.
    • Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the screen surface.
  • Environmental Conditions:
    • Ensure the HMI operates within its specified temperature and humidity ranges.
    • Keep the unit free from excessive dust, moisture, and corrosive gases.
  • Firmware Updates: Periodically check the manufacturer's website for firmware updates. Apply updates as recommended to improve performance and security.
  • Backup Project: Regularly back up your HMI project files to an external storage device to prevent data loss.

6. Troubleshooting

If you encounter issues with your HMI, refer to the following common troubleshooting steps:

ProblemPossible CauseSolution
HMI does not power onNo power supply; incorrect wiring; faulty power supplyCheck power cable connection; verify power supply voltage (24V DC); ensure correct polarity; test power supply.
Display is blank or shows errorsNo project loaded; corrupted project; hardware issueUpload the HMI project; re-upload a known good project; contact support if hardware is suspected.
No communication with PLCIncorrect communication settings; faulty cable; PLC not powered/configuredVerify HMI and PLC communication settings (baud rate, parity, data bits); check communication cables; ensure PLC is operational and configured correctly.
Touch screen unresponsiveScreen calibration issue; physical damage; software freezeRestart the HMI; recalibrate the touch screen (if option available); inspect for physical damage.

If the problem persists after attempting these solutions, please contact technical support.

7. User Tips

While no specific user reviews or Q&A content were provided for this manual, here are some general tips for optimizing your HMI experience:

  • Project Optimization: Design your HMI projects efficiently. Minimize complex animations and excessive data logging if not critical, as this can impact performance.
  • Regular Backups: Always keep an up-to-date backup of your HMI project files on a separate storage medium.
  • Environmental Control: Protect your HMI from extreme temperatures, direct sunlight, and high humidity to ensure its longevity.
  • Cable Management: Ensure all communication and power cables are securely connected and properly routed to prevent accidental disconnections or damage.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your vendor or the manufacturer directly. Ensure you have your product model number and serial number available when contacting support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.