Nasedal NT-19B

Contents

Nasedal NT-19 Dual-Action Airbrush Compressor Kit User Manual

Model: NT-19B

1. Introduction

Thank you for purchasing the Nasedal NT-19 Dual-Action Airbrush Compressor Kit. This kit is designed for a wide range of applications, including model making, cake decorating, nail art, body art, design painting, and various crafts. Its special non-oil type compressor ensures that the transmission medium remains unpolluted, providing a steady output fluid for precise work.

This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your airbrush kit. Please read it thoroughly before initial use and keep it for future reference.

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the product:

  • Ensure the power supply voltage matches the specifications (100-250V).
  • Do not operate the compressor in wet or damp conditions.
  • Keep the airbrush and compressor away from children.
  • Always wear appropriate personal protective equipment, such as safety glasses and a respirator, when spraying paints or chemicals.
  • Ensure adequate ventilation in your workspace.
  • Never point the airbrush at yourself or others.
  • Disconnect the power supply before cleaning or performing any maintenance.
  • Do not use the wrench to overtighten the airbrush nozzle; hand-tighten only. The wrench is for disassembly.

3. Package Contents

Your Nasedal NT-19 kit typically includes the following components. Please check that all items are present:

Nasedal NT-19 Airbrush Compressor Kit Contents
Figure 1: Complete Nasedal NT-19 Airbrush Compressor Kit
  • 1 x Dual-Action 0.3mm Airbrush
  • 1 x Dropper
  • 1 x Mini Wrench
  • 1 x Black Airbrush Holder
  • 1 x Air Compressor (Model NT-19B)
  • 1 x Instruction Manual for Air Compressor (This document)
  • 1 x Mini Air Filter (Oil-Water Separator)
  • 1 x Air Hose (1.8m / 5.9ft)
  • 1 x AC Transformer

Note: Depending on the specific kit version (e.g., NT-19B-2 / NT-19B-5), additional accessories may be included:

  • Airbrush Needle Tool
  • 5 x Air Brush Cleaning Needles
  • 5 x Brushes
  • Adjustable Fast Joint
  • 0.2mm nozzle and needle
  • 0.5mm nozzle and needle

4. Product Overview

4.1. Air Compressor (NT-19B)

Nasedal NT-19B Air Compressor and Airbrush
Figure 2: Nasedal NT-19B Air Compressor and Airbrush (NT-130)

The NT-19B air compressor is a compact, non-oil type unit designed for quiet and durable operation. It provides a steady air output suitable for various airbrushing tasks. It features an On/Off switch, a pilot lamp, an airbrush holder, and an adjust valve for controlling air pressure.

Nasedal NT-19B Air Compressor Components
Figure 3: Air Compressor Components (Airbrush Holder, Pilot Lamp, On/Off Switch, Power Hole, Adjust Valve, Interface)

4.2. Dual-Action Airbrush (NT-130)

The included airbrush is a professional dual-action, gravity-feed model (NT-130) with a 0.3mm nozzle diameter. Its double-action trigger design allows for precise control over both air and paint flow, saving raw materials and providing fine detail capabilities.

Dual-Action Airbrush Mechanism
Figure 4: Dual-Action Airbrush Operation. Press down for air, push back for paint.

4.3. Oil-Water Separator

The kit includes an oil-water separator (mini air filter) to protect your airbrush from moisture damage, ensuring a clean and dry air supply for optimal performance.

Airbrush Connection Diagram with Oil-Water Separator
Figure 5: Airbrush Connection Diagram showing Quick Release, Airflow Adjustment, Copper Filter, Oil-Water Separator, Discharge Valve, and Air Hose.

5. Setup Instructions

Follow these steps to set up your Nasedal airbrush kit:

  1. Connect the Air Hose: Connect one end of the 1/8" air hose to the air outlet on the compressor and the other end to the airbrush. Ensure connections are secure.
  2. Attach the Oil-Water Separator: If not already attached, connect the mini oil-water separator between the air hose and the airbrush. This helps filter moisture from the air.
  3. Place the Airbrush in Holder: Securely place the airbrush in the designated holder on the compressor.
  4. Connect Power: Plug the AC transformer into the compressor's power hole, then plug the transformer into a suitable electrical outlet.
  5. Prepare Paint: Pour your desired liquid (paint, ink, etc.) into the airbrush's fluid cup. Ensure the paint is properly thinned for airbrushing.
Easy to Use Steps for Nasedal Airbrush Kit
Figure 6: Easy to Use Steps: 1. Pour liquid, 2. Dual-Action knob, 3. Turn on compressor and adjust air pressure.

6. Operating Instructions

Using the dual-action airbrush requires coordination of air and paint flow:

  1. Turn On Compressor: Press the On/Off switch on the compressor. The pilot lamp will illuminate. The compressor runs continuously when turned on.
  2. Adjust Air Pressure: Use the adjust valve on the compressor to set the desired air pressure. The maximum pressure is approximately 25-30 psi.
  3. Control Air Flow: Press down on the airbrush trigger to release air.
  4. Control Paint Flow: While holding the trigger down for air, pull the trigger back to release paint. The further back you pull, the more paint will be released.
  5. Practice: Practice on a scrap surface to get a feel for the airbrush's response to trigger movements and paint consistency.
  6. Spraying Technique: Maintain a consistent distance from your work surface. Move your hand in smooth, even strokes.

Video Demonstration: Unboxing and Basic Operation

Watch this video for a visual guide on unboxing and basic operation of the Nasedal NT-19B Airbrush Kit.

7. Maintenance & Cleaning

Proper cleaning after each use is crucial to prevent clogging and ensure the longevity of your airbrush.

Airbrush Cleaning Tools
Figure 7: Airbrush Cleaning Tools (Brushes and Needle Tool)
  1. Empty Fluid Cup: Empty any remaining paint from the fluid cup.
  2. Rinse: Fill the cup with an appropriate cleaning solution (water for water-based paints, thinner for solvent-based paints). Spray the solution through the airbrush until it runs clear.
  3. Back-flush: Cover the nozzle with your finger or a cap and pull the trigger back to allow air to bubble back into the cup. This helps dislodge paint from the nozzle area.
  4. Disassemble (for deep cleaning): For thorough cleaning, carefully disassemble the airbrush. Pay close attention to the small components, especially the nozzle and needle.
  5. Clean Components: Use the provided cleaning brushes and needle tool to clean all paint residue from the fluid cup, needle, nozzle, and air cap.
  6. Nozzle Care: The nozzle is delicate. Always hand-tighten the nozzle. Do NOT use the mini wrench to tighten the nozzle, as this can easily break it. The wrench is only for disassembly. Be careful not to lose the mini seal on the nozzle during cleaning.
  7. Reassemble: Reassemble the airbrush carefully, ensuring all parts are correctly aligned.
  8. Compressor Maintenance: The compressor is a non-oil type and requires minimal maintenance. Keep it clean and free from dust.

8. Troubleshooting

Problem Possible Cause Solution
Air flows, but no paint sprays Clogged nozzle, paint too thick, bent needle, loose fluid nozzle. Clean the nozzle and needle. Thin paint appropriately. Check needle for damage. Ensure fluid nozzle is hand-tightened. Adjust paint flow.
Airbrush sputters or sprays inconsistently Clogged nozzle, paint too thick, air leak, low air pressure. Clean airbrush thoroughly. Adjust paint consistency. Check all connections for tightness. Increase air pressure if needed.
Air compressor is noisy or vibrates excessively Normal operation at high pressure, unstable surface. This can be normal for compact compressors. Place a weight on top of the compressor or use a non-slip mat to reduce movement.
No air from compressor Power not connected, On/Off switch off, faulty compressor. Check power connections. Ensure switch is ON. If problem persists, contact support.
Nozzle broken Overtightened with wrench. Replace the nozzle. Always hand-tighten nozzles in the future.

9. Specifications

Feature Specification
Brand Nasedal
Model Number NT-19B (Compressor)
Airbrush Type Dual-Action, Gravity Feed (NT-130)
Color Silver + Black
Material Aluminum + Copper + Rubber + Nylon + Plastic
Input Voltage 100-250V, 50/60Hz, 0.6A Max
Output Voltage 12V, 1.6A
Air Output Per Min 10Lpm
Max Pressure 25psi (up to 30psi as per some images)
Nozzle Diameter 0.3mm (also 0.2mm/0.5mm available in some kits)
Fluid Cup Capacity 7cc / 0.43 cu in
Diameter of Hose 1/8"
Air Hose Length 1.8m / 5.9ft
Air Compressor Size 11.5 x 11 x 5.7 cm / 4.5 x 4.3 x 2.2 in
Airbrush Size 14.7 x 2.8 x 8.5 cm / 5.8 x 1.1 x 3.3 in
Certifications CE, FCC, WEEE

10. User Tips

  • Paint Consistency: Always thin your paints, especially acrylics, to a milk-like consistency for optimal flow and to prevent clogging.
  • Compressor Stability: If the compressor vibrates or moves excessively, place a small weight on top of it or use a non-slip mat underneath.
  • Nozzle Size: The 0.3mm nozzle is versatile. For finer details, a 0.2mm nozzle (if included or purchased separately) can be used. A 0.5mm nozzle is suitable for broader coverage, such as 1/24 scale car models.
  • Continuous Operation: The compressor runs continuously when turned on; it does not have an auto-stop feature.
  • Nozzle Protection: Be extremely careful with the airbrush nozzle. It is delicate and can break if overtightened with a wrench. Always hand-tighten.
  • Cleaning Seal: When cleaning, be mindful of the small seal (o-ring) located on the nozzle to avoid losing it.
  • Not for Large Areas: This kit is designed for detailed work and smaller projects. It is generally not suitable for large-scale tasks like painting entire car bodies or large wall murals.

11. Warranty & Support

Nasedal products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the seller's policies or contact the Nasedal customer service directly.

An additional user manual in PDF format is available for download: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.