SHIMANO ST-R2000

Contents

SHIMANO CLARIS ST-R2000 Shifter Dual Control Lever

Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective use, installation, and maintenance of your SHIMANO CLARIS ST-R2000 Shifter Dual Control Lever. This product is designed for mechanical derailleur systems on road, gravel, and mountain bikes, primarily supporting 2x8 speed configurations. Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Safety Information CE

▲ Warning Symbol & Notice

  • This product is not a toy and is not suitable for children under 16 years old without adult supervision.
  • Keep all small parts (e.g., screws, pulleys) away from infants and toddlers to avoid choking hazards.
  • Always wear appropriate protective gear (helmet, gloves, knee pads) when operating the bicycle with this derailleur. Do not use the product in traffic without proper training.
  • Ensure the derailleur is correctly installed and adjusted before use. Improper installation may cause chain slippage, leading to falls or serious injury.
  • Do not modify the derailleur's structure or components. Unauthorized modifications void compliance and safety guarantees.
  • This product is not intended for use with children's bicycles (refer to EN 14765 for children-specific requirements).
  • Keep the derailleur away from corrosive substances (acids, solvents) and extreme temperatures to prevent mechanical failure.

Additional Safety Notes

  • Regularly inspect the derailleur for wear, damage, or loose connections.
  • Replace worn parts immediately using genuine Shimano accessories.

3. Product Overview

The SHIMANO CLARIS ST-R2000 Dual Control Lever integrates both shifting and braking functions into a single unit, providing a clean cockpit and efficient operation for road cycling. This model is part of the SHIMANO CLARIS R2000 Series.

Key Features:

  • Dual Control Lever: Combines brake and gear shift functions.
  • Mechanical Derailleur System: Reliable and precise mechanical shifting.
  • New Super SLR Brake Lever: Enhanced braking performance.
  • Reach Adjust: Screw-type adjustment for personalized lever reach.
  • Conjoined DIP Type: Integrated design for durability and performance.
Shimano Claris ST-R2000 2x8 Speed Shifter

Figure 1: SHIMANO CLARIS ST-R2000 Shifter Dual Control Lever (Main Product Image)

4. Specifications

Attribute Value
Brand Name SHIMANO
Model Number R2000 (ST-R2000-L+ST-R2000-R)
Series SHIMANO CLARIS R2000 Series
Derailleur Groupset Type Mechanical Derailleur system
Type Conjoined DIP, DUAL CONTROL LEVER
Total Capacity 2x8 speed (also compatible with 3x8 speed setups)
Gears 8 Speed
Material Alloy
Brake Lever Specifications New Super SLR
Bracket Cover Color Black
Clamp Band (mm) 23.8-24.2
Reach Adjust Screw
Origin Japan (Jp)
Components Derailleurs

Usage Restrictions:

  • Not for children under 16 years old (without adult supervision).
  • Not for bicycles with wheel sizes below 26" or above 29".
  • Not for electric bicycles with motor power exceeding 250W.
  • Not recommended for off-road use in extreme conditions (e.g., rock climbing, steep descents >30°).
  • Do not use in saltwater environments (e.g., coastal areas) without proper corrosion protection.

5. Setup and Installation

Proper installation is crucial for the safety and performance of your SHIMANO CLARIS ST-R2000 shifters. If you are unsure about any steps, it is recommended to seek assistance from a qualified bicycle mechanic.

5.1 Unpacking and Inspection

Carefully unpack the shifters (ST-R2000-L and ST-R2000-R) and included cables. Inspect all components for any signs of damage during transit. Ensure all parts listed in the product packaging are present.

Pair of Shimano Claris ST-R2000 shifters, side view, showing cables.

Figure 2: ST-R2000 Shifters with Cables

5.2 Mounting the Shifters

  1. Position the shifters on your handlebars. The clamp band diameter is 23.8-24.2mm.
  2. Secure the shifters using the appropriate tools, ensuring they are at a comfortable and ergonomic position for both braking and shifting.
  3. Adjust the lever reach using the screw mechanism to fit your hand size and preference.
Close-up of a Shimano Claris ST-R2000 shifter, showing the cable entry point.

Figure 3: Cable Entry Point on ST-R2000 Shifter

5.3 Cable Routing

  • The ST-R2000 shifters feature internal cable routing for a clean aesthetic.
  • Carefully route the shift and brake cables through the designated channels within the shifter body and handlebar.
  • Connect the brake cables to your brake calipers and the shift cables to your front and rear derailleurs.
  • Ensure cables are routed smoothly without kinks or excessive bends to maintain optimal performance.
Shimano Claris ST-R2000 shifter, illustrating cable routing.

Figure 4: Illustrative Cable Routing

5.4 Derailleur Adjustment

After installing the shifters and routing the cables, adjust your front and rear derailleurs according to Shimano's official guidelines to ensure smooth and precise shifting across all gears. This typically involves setting limit screws and cable tension.

6. Operating Instructions

6.1 Shifting Gears

The SHIMANO CLARIS ST-R2000 uses a Dual Control Lever system for shifting:

  • Upshifting (to a larger cog/chainring): Push the main brake lever inwards towards the handlebar.
  • Downshifting (to a smaller cog/chainring): Push the smaller lever located behind the main brake lever inwards towards the handlebar.
  • Ensure you are pedaling lightly when shifting to allow the chain to move smoothly between gears.

6.2 Braking

To apply the brakes, pull the main brake lever towards the handlebar. The New Super SLR brake lever design provides efficient and responsive braking. Always apply both front and rear brakes simultaneously for controlled stopping.

7. Maintenance

Regular maintenance will prolong the life and ensure the optimal performance of your SHIMANO CLARIS ST-R2000 shifters.

7.1 Routine Inspection

  • Inspect the derailleur and shifters every 500km or every 3 months, whichever comes first.
  • Check for any signs of wear, damage, or loose connections on the levers, cables, and derailleur components.
  • Ensure brake and shift cables are free from fraying or corrosion.

7.2 Cleaning and Lubrication

  • Keep the shifters and cables clean from dirt and debris.
  • Lubricate the pivot points of the levers and the exposed sections of the shift and brake cables with appropriate bicycle lubricant.
  • Avoid using harsh chemicals or solvents that could damage the plastic or rubber components.

7.3 Component Replacement

Replace worn or damaged parts immediately using genuine Shimano accessories to ensure compatibility and maintain performance.

8. Troubleshooting

8.1 Shifting Issues

  • Difficulty Shifting / Slow Shifting: Check cable tension. If too loose, shifting will be sluggish. If too tight, it may overshift. Adjust the barrel adjusters on the shifter or derailleur.
  • Chain Slippage: This can be caused by improper derailleur adjustment (limit screws), worn chain/cassette, or incorrect cable tension. Refer to the setup section for proper adjustment.
  • Ghost Shifting: Unintended shifts can occur due to worn cables, housing, or improper cable tension. Inspect and replace worn components.

8.2 Braking Issues

  • Weak Braking: Check brake cable tension and ensure brake pads are not worn out or contaminated.
  • Spongy Brake Lever: This often indicates air in hydraulic systems (not applicable for mechanical brakes) or excessive friction in mechanical cables. For mechanical brakes, check cable routing and lubrication.

If problems persist after basic troubleshooting, consult a professional bicycle mechanic.

9. User Tips

  • Precise Shifting: Users have noted the precise shifting capabilities of these levers. Ensure your derailleurs are well-tuned to fully benefit from this feature.
  • Internal Cable Routing: The shifters are designed for internal cable routing, which provides a clean look. Take care during installation to avoid kinks in the cables.
  • Sold as a Pair: The ST-R2000 shifters are typically sold as a left and right pair (ST-R2000-L + ST-R2000-R) for a complete 2x8 speed setup.

10. Frequently Asked Questions (FAQ)

Q: What material is this item made of?
A: The SHIMANO CLARIS ST-R2000 shifters are made of Alloy.
Q: Does this product support 3x8 speed configurations?
A: While primarily designed for 2x8 speed, the product title mentions compatibility with 3x8 speed setups. Please ensure you select the correct front shifter (left lever) for your specific chainring configuration (2x or 3x).
Q: Is the price for a single shifter or a pair?
A: The SHIMANO CLARIS ST-R2000 shifters are sold as a pair, including both the left (ST-R2000-L) and right (ST-R2000-R) levers.
Q: Are the cables included with the shifters?
A: Yes, the set typically includes the necessary shift cables for installation.

11. Regulatory Compliance

11.1 Applicable Regulations & Harmonized Standards

This product complies with the following EU regulations and standards:

  • General Product Safety Directive (GPSD): 2001/95/EC
  • Mechanical Directive (MD): 2006/42/EC

Harmonized Standards:

  • EN ISO 4210-2:2015 (Bicycle safety requirements for city, trekking, mountain bikes)
  • EN 14781:2015 (Racing bicycle specific safety standards)
  • REACH Regulation (EC) No 1907/2006 (Restriction of hazardous substances)

11.2 EU Declaration of Conformity (DoC)

This product (Shimano Bicycle Derailleur, Model: Universal Fit for Road/Gravel/MTB/E-Bike) meets the essential requirements of EU Directive 2006/42/EC (Mechanical Directive) and related harmonized standards. The EU Authorized Representative is responsible for ensuring compliance with EU market surveillance requirements. A complete copy of the DoC is available upon request from the EU Responsible Person.

For more detailed information, please refer to the official user manual PDF: View User Manual (PDF)

12. Manufacturer Information & Support

Manufacturer:

Name: Shimano Inc.

Address: 3-1-1 Sakai-cho, Sakai-ku, Osaka, Japan

Contact: support@shimano.com

EU Responsible Person (Authorized Representative):

Name: MJCM SARL

Country: France

Address: 78 avenue des Champs Elysees, Bureau 326, 75008 Paris, France

Phone: +33-752907452

Email: mjcm190928@gmail.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.