1. Introduction
The Hobbywing Skywalker series of Electronic Speed Controllers (ESCs) are designed for RC airplanes and helicopters, offering reliable performance and a range of current ratings from 20A to 120A, including V1 and V2 versions. These ESCs feature a special core program optimized for multi-rotor controllers and excellent compatibility with disc-type motors. The twisted-pair design of the throttle signal cable effectively reduces signal crosstalk, ensuring more stable flight.
This manual provides essential information for the proper installation, operation, and maintenance of your Hobbywing Skywalker ESC.
2. Safety Precautions
- Always connect the ESC to the battery and motor correctly. Incorrect polarity can cause severe damage.
- Ensure all connections are secure to prevent intermittent power loss during flight.
- Keep hands and loose clothing away from rotating propellers when the ESC is powered on.
- Do not operate the ESC in wet conditions or expose it to moisture.
- Verify that the ESC's current rating matches or exceeds the motor's maximum current draw.
- Always disconnect the battery from the ESC after use to prevent accidental motor activation and battery discharge.
- Perform initial setup and calibration in a safe environment, away from people and obstacles.
3. Key Features
- Optimized Core Program: Special core program for multi-rotor controllers and excellent compatibility with disc-type motors.
- Reduced Crosstalk: Twisted-pair design of the throttle signal cable for stable flight.
- High Quality & Reliable (V2 Series): High-performance 32-bit ARM M0 processor running up to 96MHz, supporting maximum speeds up to 300,000 RPM (2-pole motor).
- Multiple Protections: Includes abnormal input voltage, ESC thermal, throttle signal loss (Fail Safe), and low voltage cutoff to prolong ESC life.
- Reverse Brake: With Reverse Brake and Linear Reverse Brakes mode, effectively shortens landing distance. Brake amount is adjustable in normal brake mode.
- DEO Technology / Active Freewheeling: Provides fast and smooth throttle response, better stability, flexibility during flight, higher driving efficiency, longer flight times, and lower ESC temperatures.
- Built-in UBEC: Provides stable power to the receiver and servos.
4. Specifications
The Hobbywing Skywalker ESCs come in various current ratings and versions. Below is a summary of common specifications. Please refer to your specific model's packaging for exact details.
General Specifications
- Type: Brushless (BL)
- High Voltage/Regular: Regular
- Material: Composite Material
- Is Batteries Included: No
- Is Electric: No battery
- Recommend Age: 14+ years
- Use: Vehicles & Remote Control Toys
Detailed Specifications by Model
| Feature | Skywalker 20A V1 | Skywalker 30A V2 | Skywalker 40A V2 | Skywalker 50A V2 | Skywalker 60A V2 | Skywalker 80A V2 | Skywalker 100A V2 | Skywalker 120A V2 |
|---|---|---|---|---|---|---|---|---|
| Cont./Peak Current | 20A/25A | 30A/40A | 40A/60A | 50A/70A | 60A/80A | 80A/100A | 100A/120A | 120A/150A |
| Input (Lipo) | 2-3S | 2-3S | 3-4S | 3-4S | 3-6S | 3-6S | 3-6S | 3-8S |
| BEC Output | Linear 5V/2A | Linear 5V/2A | Switch Mode 5V/5A | Switch Mode 5V/5A | Switch Mode 5V/7A | Switch Mode 5V/7A | Switch Mode 5V/7A | Switch Mode 5V/6V/7.4V/8.4V, 10A/30A |
| Input Wires | Red-18AWG-100mm*1, Black-18AWG-100mm*1 | Red-16AWG-100mm*1, Black-16AWG-100mm*1 | Red-14AWG-100mm*1, Black-14AWG-100mm*1 | Red-14AWG-100mm*1, Black-14AWG-100mm*1 | Red-12AWG-150mm*1, Black-12AWG-150mm*1 | Red-12AWG-150mm*1, Black-12AWG-150mm*1 | Red-12AWG-150mm*1, Black-12AWG-150mm*1 | Red-10AWG-150mm*1, Black-10AWG-150mm*1 |
| Output Wires | Black-18AWG-75mm*3 | Black-16AWG-75mm*3 | Black-16AWG-75mm*3 | Black-16AWG-75mm*3 | Black-14AWG-100mm*3 | Black-14AWG-100mm*3 | Black-14AWG-100mm*3 | Black-12AWG-100mm*3 |
| Input Connectors | No | No | No | No | No | No | No | No |
| Output Connectors | 3.5 Gold Connectors (Female) | 3.5 Gold Connectors (Female) | 3.5 Gold Connectors (Female) | 3.5 Gold Connectors (Female) | 4.0 Gold Connectors (Female) | 4.0 Gold Connectors (Female) | 4.0 Gold Connectors (Female) | 4.0 Gold Connectors (Female) |
| Size (L x W x H) | 42 x 25 x 8mm | 60 x 25 x 8mm | 60 x 25 x 8mm | 60 x 25 x 8mm | 73 x 30 x 12mm | 85 x 36 x 9mm | 85 x 36 x 9mm | 83 x 35 x 22mm |
| Net Weight | 19g | 33g | 36g | 36g | 68g | 79g | 92g | 117g |
Note: 60A is the newest version, supporting 3-6S Lipo Battery. 40A, 50A, 100A are V2 versions. 80A has both V2 and older versions.
5. Setup and Installation
5.1 Wiring Connections
- Motor Connection: Connect the three output wires from the ESC to the three wires of your brushless motor. If the motor rotates in the wrong direction, swap any two of the three wires to reverse the rotation.
- Battery Connection: Connect the input wires (red and black) of the ESC to your LiPo battery. Ensure correct polarity (red to positive, black to negative). Input connectors are typically not pre-installed on the ESC and may require soldering your preferred connector (e.g., XT60, T-plug).
- Receiver Connection: Plug the small signal cable from the ESC into the throttle channel of your RC receiver. This cable provides both the throttle signal and power from the built-in UBEC to the receiver and servos.
5.2 Throttle Range Calibration (Recommended)
For optimal performance and safety, it is highly recommended to calibrate the ESC's throttle range with your transmitter. This ensures the ESC correctly interprets the full range of throttle signals from your radio.
- Turn on your transmitter and set the throttle stick to its maximum position.
- Connect the battery to the ESC. The motor will emit a series of beeps.
- Once the beeps change or stop, move the throttle stick to its minimum position.
- The ESC will emit another series of beeps, confirming successful calibration.
- Disconnect the battery and then reconnect it to complete the process.
6. Operation and Programming
The Skywalker ESCs offer programmable parameters to fine-tune performance for various applications. Programming can be done via your transmitter or a dedicated LED Program Box.
6.1 Programmable Items
| Items | Values 1 | Values 2 | Values 3 | Values 4 | Values 5 |
|---|---|---|---|---|---|
| Brake Type | *Disabled | Normal | Reverse | Linear Reverse | |
| Brake Force | *Low | Medium | High | ||
| Voltage Cutoff Type | *Soft | Hard | |||
| Lipo Cells | *Auto Calc | 3S | 4S | 5S | 6S |
| Cutoff Voltage | Disabled | Low | *Medium | High | |
| Start-up Mode | *Normal | Soft | Very Soft | ||
| Timing | Low | *Medium | High | ||
| Active Freewheeling | *On | Off | |||
| Search Mode | *Off | 5min | 10min | 15min |
Note: Values marked with * in the table are the factory default settings.
6.2 Programming Methods
- Via Transmitter: Supported for basic parameter adjustments. Refer to your ESC's specific manual for the sequence of throttle stick movements and beeps.
- Via LED Program Box: Supported for easier and more precise programming. Connect the program box to the ESC's signal wire and follow the instructions provided with the program box.
- Other Methods: LED Program Card is not supported. LCD Program Box, WiFi Module, and OTA Programmer are not supported. Program Port supports Program Wire Firmware.
6.3 Special Features in Operation
- Search Mode: This feature helps locate your aircraft by pulsing the motor to beep if it falls into a visually obstructed area. It also prompts disconnection of the battery if the ESC has been inactive for a set time, preventing battery damage.
- Reverse Brake: Enables reverse thrust to shorten landing distances, simulating real aircraft landings. The brake amount is adjustable in normal brake mode.
- DEO Technology (Active Freewheeling): Improves throttle response, flight stability, and efficiency, leading to longer flight times and lower ESC operating temperatures.
7. Maintenance
- Keep the ESC clean and free from dust, dirt, and moisture.
- Regularly inspect all wires and connectors for signs of wear, damage, or corrosion.
- Ensure adequate airflow around the ESC during operation to prevent overheating.
- Store the ESC in a dry, cool place when not in use.
- Avoid physical impact or excessive vibration to the ESC.
8. Troubleshooting
- Motor not spinning or spinning incorrectly:
- Check all wiring connections between the ESC, motor, and receiver.
- Ensure the battery is charged and properly connected.
- If the motor spins in the wrong direction, swap any two of the three motor wires.
- Perform throttle range calibration.
- Motor brake not working properly:
- Check the ESC programming for brake settings. Refer to the programming table and adjust as needed using a program box or transmitter.
- ESC overheating:
- Ensure the ESC has sufficient airflow for cooling.
- Verify that the motor and propeller combination is not overloading the ESC.
- Check for short circuits in the motor or wiring.
- No response from ESC:
- Check power connections and ensure the battery is charged.
- Verify the signal cable is correctly plugged into the receiver's throttle channel.
- Ensure the receiver is powered on and bound to the transmitter.
9. User Tips
- Calibration is Key: Always perform throttle range calibration, especially when using PWM mode, to ensure accurate throttle response.
- Programming for Performance: Utilize the programmable features, such as cutoff voltage, start-up mode, and timing, to optimize the ESC for your specific motor and battery setup. Experiment with timing settings for 5S or 6S batteries if needed.
- Choose the Right Amperage: For motors like the 2212 on a 920kv setup for an F450, a 30A ESC might be sufficient for 3S batteries, but a 40A ESC is recommended for 4S battery support to provide a safety margin. Always select an ESC with sufficient current capacity for your motor.
- Connector Types: Be aware that some ESCs may come with T-plug or XT60 connectors, or bare wires requiring you to solder your preferred connector. Check product details carefully.
10. Warranty and Support
For warranty claims, technical support, or service inquiries, please contact your retailer or Hobbywing customer service directly. Keep your proof of purchase for any warranty-related requests.