diymore Portable Power Bank DIY Case

Contents

Portable Power Bank DIY Case

Model: Portable Power Bank DIY Case | Brand: diymore

1. Introduction

Thank you for choosing the diymore Portable Power Bank DIY Case. This kit allows you to assemble your own portable power bank using two 18650 lithium batteries (not included). It features a USB output for charging various mobile devices and a Micro USB input for charging the power bank itself. Its stylish, lightweight, and vivid design makes it a convenient companion for your electronic devices.

2. Important Safety Precautions

Please read all safety instructions carefully before assembly and use. Failure to follow these instructions may result in fire, electric shock, damage to the product, or personal injury.

  • Batteries Not Included: This kit does NOT include 18650 lithium batteries. You must purchase them separately.
  • Battery Type: Use only high-quality 18650 lithium-ion batteries. Do not use damaged or counterfeit batteries.
  • Correct Polarity is CRITICAL: When installing batteries, pay extreme attention to the positive (+) and negative (-) poles. Incorrect installation (anti-assembly) will cause the circuit board to burn out, and such damage is not covered by any replacement policy.
  • DIY Kit: This is a DIY product. While all components are professionally tested, proper assembly is essential for safe and correct operation.
  • Avoid Short Circuits: Ensure no metal objects come into contact with the battery terminals or circuit board that could cause a short circuit.
  • Do Not Modify: Do not attempt to modify or disassemble the power bank case or its internal components beyond the intended assembly.
  • Operating Environment: Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
  • Children: Keep out of reach of children.

3. Package Contents

Please check the package for the following items:

  • 1 x DIY Mobile Power Box (includes case halves and internal circuit board)
  • 1 x Keychain/Lanyard (may vary)

Note: 18650 lithium batteries are NOT included and must be purchased separately.

4. Setup and Assembly

Follow these steps to assemble your power bank:

  1. Open the Case: Carefully separate the two halves of the power bank case. The circuit board will be attached to one half.
  2. Prepare Batteries: Ensure you have two fully charged 18650 lithium batteries. Inspect them for any damage.
  3. Install Batteries (CRITICAL STEP):
    • Observe the battery compartment and the circuit board for polarity markings (+ and -).
    • Insert the first 18650 battery, ensuring its positive (+) end aligns with the positive contact in the case and its negative (-) end aligns with the negative contact (usually a spring).
    • Repeat for the second 18650 battery, ensuring correct polarity.

    WARNING: Incorrect battery polarity will permanently damage the device. Double-check before proceeding.

    Two 18650 batteries correctly installed in the power bank case, showing a red indicator light.

    Image: Two 18650 batteries correctly installed in the power bank case, with a red indicator light illuminated.

  4. Close the Case: Carefully align the two halves of the case and snap them together. Ensure no wires are pinched and the batteries are securely held.
  5. Attach Keychain (Optional): If desired, attach the provided keychain or lanyard to the designated loop on the case.
Exploded view of the power bank DIY case components, showing the circuit board, case halves, and keychain.

Image: Exploded view of the power bank DIY case components, showing the circuit board, case halves, and keychain.

5. Operating Instructions

5.1. Charging the Power Bank

To charge the internal 18650 batteries within the power bank case:

  1. Connect a standard Micro USB cable (not included) to the Micro USB input port on the power bank.
  2. Connect the other end of the USB cable to a USB power source (e.g., wall adapter, computer USB port).
  3. An indicator light (typically red) will illuminate to show that the power bank is charging.

5.2. Charging External Devices

To charge your smartphone, camera, MP3 player, or other USB-powered devices:

  1. Connect your device's USB charging cable to the standard USB-A output port on the power bank.
  2. Connect the other end of the cable to your device.
  3. The power bank will begin charging your device. An indicator light (typically blue) may illuminate to show discharge/output.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the power bank. Do not use liquid cleaners or solvents.
  • Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: If not used for extended periods, it is recommended to fully charge the 18650 batteries every 3-6 months to maintain their lifespan.

7. Troubleshooting

  • Power Bank Not Charging:
    • Ensure the Micro USB cable is fully inserted into both the power bank and the power source.
    • Check if the power source is active.
    • Verify that the 18650 batteries are correctly installed with the right polarity.
  • Device Not Charging from Power Bank:
    • Ensure the power bank has sufficient charge.
    • Check the USB cable connecting the power bank to your device for damage and ensure it's fully inserted.
    • Try charging a different device to rule out an issue with your primary device.
  • No Indicator Lights:
    • Re-check battery installation and polarity.
    • Ensure the case is properly closed and making good contact.

8. Specifications

FeatureSpecification
Battery Type2 x 18650 Lithium Battery (Not Included)
InputDC 5V/1A (maximum) via Micro USB
OutputDC 5V/1A (maximum) via USB-A
DimensionsApproximately 22 x 42 x 86mm
Cycle Life>500 times
Working Temperature-10°C to 40°C
Transportation Environment-20°C to 50°C

9. User Tips

  • LED Indicators: When charging the power bank, a red LED typically indicates charging. When the power bank is discharging (charging a device), a blue LED may illuminate.
  • Battery Quality: Using high-quality 18650 batteries will ensure better performance and safety for your DIY power bank.

10. Frequently Asked Questions (FAQ)

Q: Does this power bank kit come with batteries?
A: No, the 18650 lithium batteries are not included and must be purchased separately.
Q: How many batteries does it use?
A: This DIY case is designed to hold two 18650 lithium batteries.

11. Warranty and Support

As this is a DIY kit, proper assembly and handling are crucial. Damage resulting from incorrect assembly, especially incorrect battery polarity, is not covered. For any questions or support regarding the components of this kit, please contact your retailer.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.