PowMr HHJ-60A

Contents

PowMr MPPT 60A Solar Charge Controller

Model: HHJ-60A

1. Product Overview

The PowMr HHJ-60A is a high-performance Maximum Power Point Tracking (MPPT) solar charge controller designed for efficient and reliable charging of various battery types in solar power systems. It features a 60A charging current, high tracking efficiency, and a robust DSP controller for fast digital signal processing.

PowMr MPPT 60A Solar Charge Controller with key features: 160V Max PV, 60A MPPT, 12/24/36/48V Voltage.
Figure 1: PowMr MPPT 60A Solar Charge Controller with key specifications.

Key Features:

  • Intelligent Maximum Power Point Tracking (MPPT) technology.
  • Built-in DSP controller for high performance.
  • Automatic battery voltage detection: 12V/24V/36V/48V.
  • Three-stage charging process for optimized battery performance.
  • Multi-function LCD display for easy monitoring.
  • Comprehensive protection features.
  • Compatible with Sealed Lead Acid, Vented Gel, NiCd, and Lithium batteries.
Video 1: Product introduction highlighting 60A charging current, 99.9% MPPT efficiency, DSP controller, wide system voltage range, segmented charging, built-in protections, and compatibility with lead-acid and lithium batteries.

2. Setup and Installation

2.1 Unpacking

Carefully unpack the contents and ensure all items are present:

  • 1 x PowMr MPPT Solar Charge Controller (HHJ-60A)
  • 1 x User Manual (English)
  • Mounting hardware (screws, brackets)
Contents of the PowMr MPPT Solar Charge Controller package, including the controller, user manual, and mounting accessories.
Figure 2: Package contents.

2.2 Mounting

The controller is designed for easy mounting. Choose a dry, well-ventilated location away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for proper airflow, especially for the cooling fan.

Image showing the PowMr MPPT Solar Charge Controller mounted on a surface, highlighting its compact design and mounting brackets.
Figure 3: Example of controller mounting.

2.3 Wiring Connections

IMPORTANT SAFETY NOTE: Always connect the battery bank to the controller FIRST, before connecting solar panels or loads. Disconnect in reverse order (loads, then solar, then battery).

Refer to the wiring diagram below for correct connections. Ensure all connections are secure and use appropriate wire gauges for your system's current and distance. Some users have noted that the green connectors can be challenging for larger cables (4mm² or 6mm²), so ensure cables are fully inserted and tightly secured to prevent accidental disconnections.

Detailed wiring diagram for the PowMr MPPT Solar Charge Controller, showing connections for solar panels, battery bank, DC load, breaker, PV combiner box, DC disconnect, ground bus, and AC/DC inverter.
Figure 4: Wiring Diagram. Note: This is an example. Actual wiring may vary. Consult local and national electric codes.

WARNING: The output terminal (OU+ / OU-) is intended for lamps only (maximum 60W for 12V systems, and 100W for 24V/36V/48V systems). Connecting other types of loads or exceeding these wattage limits will damage the controller. The battery output terminals (BT+ / BT-) do NOT have reverse polarity protection.

Connection Steps:

  1. Connect the battery bank to the BT+ and BT- terminals.
  2. Connect the solar panels to the PV+ and PV- terminals.
  3. Connect your DC load (if applicable and within specified limits) to the OU+ and OU- terminals.

3. Operating Instructions

3.1 LCD Display and Navigation

The controller features a multi-function LCD screen that displays real-time system information such as battery voltage, charging current, PV voltage, and working mode. Use the 'PRG ESC', 'Up', 'Down', and 'ENTER' buttons to navigate through the menus and adjust settings.

Close-up of the PowMr MPPT Solar Charge Controller's LCD screen and control buttons.
Figure 5: LCD Display and Control Buttons.

3.2 Working Modes

The controller operates in several modes to optimize charging and system performance:

  • 3.0 Night Mode: No charging occurs.
  • 4.0 MPPT Mode: The controller actively tracks the maximum power point of the solar panels to deliver the most efficient charge to the battery.
  • 7.0 Absorption Mode: After bulk charging, the controller maintains a constant voltage to fully charge the battery and ensure maximum capacity.
  • 8.0 Floating Mode: Once the battery is fully charged, the controller reduces the voltage to a lower level to maintain the battery at full charge and prevent overcharging.
Diagram illustrating the working modes and sub-interfaces of the PowMr MPPT Solar Charge Controller, including Night Mode, MPPT Mode, Absorption Mode, and Floating Mode.
Figure 6: Working Modes and Sub-interfaces.

3.3 Three-Stage Charging

The controller employs a 3-stage charging algorithm to prolong battery life and ensure efficient charging:

  1. Equalize Charge: (For certain battery types) A controlled overcharge to balance cell voltages and remove sulfate crystals.
  2. Boost Charge: Charges the battery at its maximum current until it reaches a set voltage level.
  3. Float Charge (Trickle Charging): Maintains the battery at a safe, low voltage to prevent self-discharge and keep it fully charged without causing damage.
Diagram showing the 3-stage charging process: Equalize Charge, Boost Charge, and Float Charge, with battery icons indicating charge level.
Figure 7: 3-Stage Charging Process.

3.4 Battery Type Selection

The controller supports various battery types. Ensure you select the correct battery type in the settings for optimal charging and to prevent damage. Refer to the 'Output specification' table in Section 6 for details on selectable battery types and charging references.

4. Maintenance

Regular maintenance ensures the longevity and optimal performance of your solar charge controller.

  • Cleanliness: Periodically clean the exterior of the controller, especially the fan and ventilation openings, to prevent dust buildup. The high-airflow exhaust fan is designed to ventilate heat and dust, but external cleaning is still recommended.
  • Connections: Inspect all wiring connections (PV, battery, load) regularly to ensure they are tight and free from corrosion. Loose connections can lead to overheating and poor performance.
  • Environment: Ensure the installation environment remains dry and within the specified operating temperature range.

5. Troubleshooting

The controller includes a fault diagnosis system to assist with troubleshooting. Common issues and their potential solutions are listed below:

  • LCD Screen Appears Broken/Garbled: Some users have reported that the LCD screen may appear broken or garbled in low light or early morning conditions. This is often a temporary visual anomaly and the screen typically returns to normal after a couple of hours or with increased light.
  • Battery Overcharging/Boiling: If the battery appears to be overcharging or 'boiling' (excessive gassing), verify that the correct battery type and charging parameters (absorption, float voltages) are set in the controller's menu. Incorrect settings, especially for lead-acid batteries, can lead to overcharging and damage.
  • Settings Not Saving: After making changes to the controller's parameters, it is often necessary to completely disconnect and then reconnect the power (first solar, then battery) for the new settings to be saved and take effect.
  • Low Charging Current/Efficiency: Check PV panel connections, ensure they are clean and not shaded. Verify that the PV input voltage (Voc) is within the recommended range (1.5 to 2 times the battery voltage for best efficiency).
  • Protection Activations: The controller has multi-function protection. If the system shuts down or displays an error, check for the following conditions:
List of protection features including PV Over Current, PV Short Circuit, PV Reverse Polarity, Battery Over Voltage, Battery Over Discharge, Load Over Current Protection, Load Short Circuit Protection, and Over Temperature Protection.
Figure 8: Multi-function Protection Features.

If you encounter persistent issues, consult the detailed troubleshooting section in the full user manual (if available) or contact customer support.

6. Specifications

ParameterDescriptionMPPT-60A
Model NameHHJ-60A
Charging ModeMPPT Maximum power point tracking automatically
Charging3-stage: constant current (MPPT), constant voltage (Absorption Voltage), floating charge
System TypeDC12V/24V/36V/48V Recognition automatically
System Voltage Auto Recognition12V systemDC9V-DC15V
24V systemDC18V-DC29V
36V systemDC30V-DC39V
48V systemDC40V~DC60V
Soft Start Time≤1S
Dynamic Response and Recovery Time≥98.1% (Voc is 1.5 or 2 times than battery, then it’s best efficiency)
PV Utilization≥99%
Input Specification
Voc from PV (Make sure the Voc of PV meets the requirement as right. Voc is 1.5 or 2 times than battery, then it’s best efficiency.)12V systemDC20V~DC80V
24V systemDC37V~DC105V
36V systemDC50V~DC160V
48V systemDC72V~DC160V
The maximum PV input voltage (Voc)DC190V (The controller can’t work at this voltage for long duration that will break controller. Please refer to Input voltage from PV.)
The maximum PV input power (The total power rated of PV can’t be over this watt that will break the controller.)12V system720W
24V system1440W
36V system2100W
48V system2800W
Output Specification
Selectable battery type (default is Sealed)Vented/ Sealed / Gel / NiCd / Lithium battery (defined voltage for other battery by user)
Absorption Charging VoltageRefer to Batteries charging reference
Floating Charging VoltageRefer to Batteries charging reference
Overcharging protection voltage12V system15V
24V system30V
36V system45V
48V system60V
Rated output current60A
Temperature Coefficient±0.02%/centi-degree
Automatic Temperature Compensation14.2V-(Max temperature-25 centi-degree)*0.3
Output Voltage Ripple-Peak100mV
Output Voltage Accuracy≤±1%
Input Anti-intrusion ProtectionYes
Temperature Protection75°C
Temperature Increased ProtectionOutput power will reduce when it’s more 70 °C, Output power will be normal when it’s less 55 °C
Fan-on Temperature>40 °C
Fan-off Temperature<35 °C
Acoustic Noise≤40dB
Cooling WayForced air cooling
ComponentsImported materials, Accord to EU standards, Industrial grade range.
Environmental RequirementsMeet 2002/95/EC; No cadmium, hydrides and fluorides
Security LevelAccord to CE, PSE, FCC, EMC, EN60950
Electromagnetic CompatibilityAccord to EN61000, EN55022, EN55024
EnclosureIP21
Net weight (Kg)1.2
Gross weight (Kg)1.3

7. Warranty and Support

All PowMr products are guaranteed for two years. Specific components, such as fans, are guaranteed for 5000 hours of operation.

The product is certified to meet various international standards, including CE, PSE, FCC, EMC, and EN60950, ensuring safety and electromagnetic compatibility.

California Proposition 65 Warning:

⚠️ Warning: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information go to www.P65Warnings.ca.gov/.

8. User Tips

  • Manual Voltage Calibration: The controller allows for manual voltage calibration, which can be beneficial for fine-tuning charging parameters and optimizing performance, especially in varying conditions.
  • Cable Connections: Pay close attention when connecting cables, particularly larger gauges (4mm² or 6mm²), to the green terminals. Ensure they are fully inserted and securely tightened to prevent loose connections.
  • Monitoring Data: The controller provides real-time current and wattage data. If you require cumulative amp-hour or watt-hour tracking, consider using an external coulometer or energy meter.
  • Low-Light Performance: This controller has demonstrated good performance in low-light conditions, effectively harvesting power even during cloudy weather or twilight hours.
  • Saving Settings: After adjusting any parameters, remember to perform a complete power cycle (disconnect solar, then battery, then reconnect battery, then solar) to ensure the new settings are properly saved and applied.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.