SolarEpic Tracer AN

Contents

Epever MPPT Solar Charge Controller Tracer AN Series User Manual

Models: Tracer1206AN, Tracer2206AN

1. Introduction

The Epever MPPT Solar Charge Controller Tracer AN series is an advanced maximum power point tracking (MPPT) charge controller designed for off-grid solar systems. It ensures efficient and safe charging of your battery bank from solar panels. This manual provides essential information for the proper installation, operation, and maintenance of your controller.

2. Safety Information

  • Always connect the battery first to the charge controller before connecting the solar panel.
  • Ensure all wiring is correctly polarized (+/-) to prevent damage to the controller and other components.
  • Use appropriate wire gauges for all connections to handle the expected current.
  • Install the controller in a well-ventilated area, away from flammable materials and direct sunlight.
  • Do not attempt to repair or modify the controller yourself. Refer to qualified personnel for service.
  • Disconnect all power sources (solar panel and battery) before performing any installation, maintenance, or wiring changes.

3. Package Contents

Upon unboxing, please verify that all items are present:

  • Epever MPPT Solar Charge Controller (Tracer AN Series)
  • User Manual
  • Remote Temperature Sensor (Optional Accessory)
  • Communication Cable (e.g., RS485 to USB, RJ45)
  • Mounting Screws
  • Certificate

Video: Unboxing and initial component overview of the MPPT Solar Charge Controller.

4. Product Overview

The Tracer AN series MPPT solar charge controller features a robust design with a clear LCD display and intuitive controls. Key components include:

  • LCD Display: Shows real-time system data and allows for parameter settings.
  • Select/Enter Buttons: For navigating menus and confirming selections.
  • Terminal Blocks: For connecting the remote temperature sensor, solar panel, battery, and load.
  • RS485 Interface: For communication with external devices like a remote meter (MT50) or PC software.
  • Heat Sink: Located on the bottom, designed for efficient heat dissipation.
Front view of the Epever MPPT Solar Charge Controller showing the LCD display and control buttons.

Image: Front view of the Epever MPPT Solar Charge Controller.

Bottom view of the Epever MPPT Solar Charge Controller showing the heat sink fins.

Image: Bottom view showing the heat sink.

5. Setup and Installation

Follow these steps carefully for safe and correct installation:

  1. Prepare for Installation: Ensure you have all necessary components: solar panel, battery, controller, and any optional accessories like the remote meter.
  2. Mount the Controller: Securely mount the controller in a suitable location, ensuring adequate ventilation around the heat sink. Loosen the screws on the terminal blocks before wiring.
  3. Connect the Battery: ALWAYS CONNECT THE BATTERY FIRST. Connect the positive and negative terminals of your battery to the corresponding battery terminals on the controller. Ensure a secure connection. The controller's backlight should turn on.
  4. Connect the Solar Panel: Connect the positive and negative leads from your solar panel to the corresponding PV input terminals on the controller.
  5. Connect the Load: Connect your DC load to the load terminals on the controller.
  6. Connect Remote Temperature Sensor (Optional): If using, connect the remote temperature sensor to the designated 'Temp. Sensor' port. Attach the sensor to the battery for accurate temperature compensation during charging.
  7. Connect Communication Interface (Optional): If using a remote meter (MT50) or PC software, connect the RS485 communication cable to the 'COM' port on the controller and the respective device.

Video: Detailed installation steps for the solar charge controller, including wiring the battery, solar panel, and optional temperature sensor.

Wiring diagram showing connections for battery, solar panel, load, and optional inverter.

Image: Basic wiring diagram for the solar system components.

Diagram illustrating various communication options for the Tracer AN controller, including MT50, eBox-WiFi-01, eBox-BLE-01, and PC connections.

Image: Communication options for the Tracer AN controller.

6. Operating Instructions

The controller's LCD display and optional remote meter (MT50) provide real-time data and allow for parameter adjustments.

6.1. LCD Display Navigation

Use the 'SELECT' and 'ENTER' buttons on the controller to navigate through the display screens and adjust settings. The display shows various parameters such as:

  • PV Voltage (PV V)
  • PV Current (PV A)
  • PV Input Power (PV kWh)
  • Battery Voltage (Batt. V)
  • Battery Current (Batt. A)
  • Detected Temperature (Temp. °C)
  • Load Current (Load A)
  • Load Power (Load kWh)
  • Load Mode (e.g., 104 for Manual Control, 2n for Light On/Off)

6.2. Remote Meter (MT50) Operation (Optional)

The MT50 remote meter offers a more comprehensive interface for monitoring and controlling the charge controller. It displays detailed information and allows for advanced settings, including:

  • Monitoring: Real-time data for solar, battery, and load.
  • Device Info: Controller model, date, time.
  • Test Operation: Manual control of load.
  • Control Parameters: Battery type, charge/discharge limits, load mode (Manual Control, Light On/Off, Light On+Timer, Time Control).
  • Failure Info: Error codes and warnings.

Video: Demonstrating LCD display settings and MT50 remote meter operation.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your solar charge controller:

  • Check Connections: Periodically inspect all wiring connections for tightness and corrosion.
  • Clean the Controller: Keep the controller clean and free from dust and debris, especially the heat sink, to ensure proper cooling.
  • Inspect Wiring: Check for any signs of wear, fraying, or damage to the cables. Replace damaged cables immediately.
  • Monitor Performance: Regularly check the LCD display or remote meter for any error codes or unusual readings.
  • Battery Health: Ensure your battery is well-maintained according to its manufacturer's guidelines.

8. Troubleshooting

Here are some common issues and potential solutions:

  • Low Amperage Output: If the controller shows very low amperage (e.g., 0.2A with 20V PV input), check the solar panel for shading or dirt, verify all wiring connections are secure, and ensure the battery is not already fully charged.
  • Load Not Turning On/Off as Expected: Review the 'Load Mode' settings on the LCD display or MT50 remote meter. Ensure the correct mode (e.g., Light On/Off, Light On+Timer, Time Control) is selected and configured properly for your desired operation.
  • Controller Not Powering On: Double-check the battery connections. The battery must be connected first and correctly polarized for the controller to power up.
  • System Not Charging: Verify that the solar panel is receiving adequate sunlight and that its voltage is within the controller's specifications. Check all PV and battery connections.

9. Specifications

Table of specifications for Tracer1206AN and Tracer2206AN models, including nominal system voltage, rated battery current, rated load current, max PV open circuit voltage, max PV input power, charging voltages, self-consumption, grounding, temperature ranges, enclosure, overall dimensions, terminal size, and net weight.

Image: Detailed specifications for Tracer1206AN and Tracer2206AN models.

Tracer AN Series Specifications
FeatureTracer1206ANTracer2206AN
Nominal system voltage12/24V auto work
Rated battery current10A20A
Rated load current10A20A
Max. PV open circuit voltage60V
Max. PV input power130W (12V)260W (12V)
260W (24V)520W (24V)
Equalize charging voltageGel: 14.2V, Sealed: 14.4V, Flooded: 14.6V
Boost charging voltageGel: 14.2V, Sealed: 14.4V, Flooded: 14.6V
Float charging voltageGel /Sealed /Flooded: 13.8V
Low voltage reconnect voltageGel /Sealed /Flooded: 12.6V
Low voltage disconnect voltageGel /Sealed /Flooded: 11.1V
Self-consumption≤20mA(12V) ≤16mA(24V)
GroundingCommon positive
Temp. compensation-3mV/℃/2V
Communication PortRS485 / RJ45 interface
Working temperature-25℃~+45℃
Storage temperature-35℃~+80℃
Humidity≤95% N.C.
EnclosureIP30
Overall dimension172x139x44mm172x139x44mm
Terminal4mm210mm2
Net weight0.6kg1.1kg

10. User Tips

  • Battery Requirement: This MPPT controller is designed to work with a battery. Direct connection of a solar panel to a load (like a submersible pump) without a battery is generally not recommended as it can lead to unstable operation or damage to the load and controller.
  • Load Control Timing: For precise control over load start/stop times (e.g., for lighting), utilize the 'Light On+Timer' or 'Time Control' load modes available through the LCD display or MT50 remote meter. Adjusting these settings allows for custom operational schedules.
  • Troubleshooting Low Amperage: If experiencing low amperage output, ensure your solar panels are clean and free from obstructions. Verify that the battery is not already at full charge, as the controller will reduce current in such cases. Check all connections for looseness or corrosion.

11. Warranty and Support

This product is covered by a manufacturer's warranty against defects in materials and workmanship. For detailed warranty terms, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.