1. Product Overview
The GameSir T4 Pro is a versatile Bluetooth game controller designed for a wide range of gaming platforms. It features a 6-axis gyroscope for precise motion control, programmable buttons for personalized configurations, asymmetric vibration motors for immersive feedback, and colorful LED backlighting.
GameSir T4 Pro Bluetooth Game Controller
2. System Requirements
- Android: 8.0 or above
- iOS: 13 or above
- Windows: 7/10/11
- Nintendo Switch
3. Device Layout
Detailed layout of the GameSir T4 Pro controller buttons and features.
| Indicator | Description |
|---|---|
| Left Joystick | D-Pad |
| SELECT Button | HOME Button |
| START Button | Right Joystick |
| ABXY Button | TURBO Button |
| Indicator | USB Receiver |
| LB Button | RB Button |
| LT Button | RT Button |
| Type-C Connector | Phone Holder Base |
| Charging Indicator | M1 M3 Button |
| M2 M4 Button |
4. Setup and Connection
4.1 Power On/Off
- Power On: Press and hold the HOME button for 1 second.
- Power Off: Press and hold the HOME button for 5 seconds.
4.2 Pairing and Reconnection
To enter pairing mode, select a key combination according to the desired gamepad mode and power on. The game controller remembers the last paired device and will automatically reconnect by pressing and holding the HOME button.
4.3 Connecting to PC via USB Cable
- With the gamepad off, plug the USB cable to the USB port of your PC.
Connecting to PC via USB Cable
4.4 Connecting to PC or Android TV Box via USB Receiver
- Plug the USB receiver into the USB port of your computer or Android TV box.
- Press the X + HOME buttons until the gamepad is turned on. The gamepad's indicator is solid blue and the receiver's is solid red to indicate a successful connection.
- The next time you connect, just press the gamepad's HOME button to power on, it will automatically be connected.
NOTE:
If the gamepad has been switched to another mode, you need to use the key combination to restart.
Connecting via USB Receiver
4.5 Connecting to Nintendo Switch via Bluetooth
- Go to the main interface of the Switch, and click Controllers → Change Grip/Order to enter the pairing interface.
- Press the Y + HOME buttons until the gamepad is turned on.
- The gamepad will be automatically paired with the Switch.
- The next time you connect, just press the gamepad's HOME button to power on, it will automatically connect and wake up the Switch.
NOTE:
In Switch mode, the values of the A button & B button, and X button & Y button of the gamepad will be swapped. If the gamepad has been switched to another mode, you need to use the key combination to restart.
Connecting to Nintendo Switch
4.6 Connecting to Mobile Phone via Bluetooth (Android)
- Press the A + HOME buttons until the gamepad is turned on.
- Turn on the phone's Bluetooth, search for [Gamesir-T4pro], click and pair.
- The next time you connect, just press the gamepad's HOME button to power on, it will automatically be connected.
NOTE:
If the gamepad has been switched to another mode, you need to use the key combination to restart.
Connecting to Android Device
4.7 Connecting to Mobile Phone via Bluetooth (iOS / Apple Arcade / MFi)
- Press the B + HOME buttons until the gamepad is turned on.
- Turn on the phone's Bluetooth, search for [Xbox Wireless Controller], click and pair.
- The next time you connect, just press the gamepad's HOME button to power on, it will automatically be connected.
NOTE:
If the gamepad has been switched to another mode, you need to use the key combination to restart.
Connecting to iOS Device
4.8 Using the Phone Holder
The detachable phone holder allows you to easily attach your smartphone to the controller for mobile gaming. Simply insert the phone holder from the top of the gamepad.
Attaching the Phone Holder
5. Operating Instructions
5.1 Backlight and Motor Vibration Intensity Adjustment
| Keybinds | Description |
|---|---|
| Hold LT, RT, R3 + D-Pad Up & Down | Adjust the brightness of the gamepad's backlight (5 levels, default: the brightest) |
| Hold LB + RB for 5 Seconds | Open/Close ABXY backlight |
| Turbo + D-Pad Up & Down | Adjust the intensity of motor vibration (5 levels) |
5.2 Turbo Function
| Turbo Function | Set/Cancel Turbo | Indicator Light | Programmable Buttons |
|---|---|---|---|
| Achieve fast attacks in the game. | Press and hold the button that needs a Turbo set, then press the TURBO button. | The backlight of the right joystick flashes red, meaning the set is done. After canceling the Turbo, the backlight of the right joystick becomes blue again. | A, B, X, Y, LB, RB, LT, RT |
NOTE:
In Switch mode, the TURBO button is defaulted to the Screenshot function. To use the Turbo function, it's required to change the Screenshot function to the Turbo function by pressing the R3+TURBO buttons first. Then set the Motor Vibration Intensity / Turbo Function as above. To use the Screenshot function, press the R3+TURBO buttons again.
5.3 Back Buttons Function (M1-M4)
The four back buttons (M1, M2, M3, M4) are programmable for highly personalized configurations. You can assign single buttons or complex button combinations to these back buttons.
| Trigger Mode | How to Enter | Description | Indicator Light |
|---|---|---|---|
| Triggered at the Same Time | Any M button + SELECT button | M1 button + SELECT buttons to enter the Same Time Trigger Programming Mode. Hold the LB and R3 buttons. Press M1 button again to confirm. Press M1 to enable the LB and R3 to be triggered simultaneously. | The backlight of the Right joystick stays blue and red, meaning the programming mode is entered. The backlight of the right joystick stays blue, meaning the programming is completed. |
| Triggered in Sequence | Any M button + START button | M1 button + START buttons to enter the Sequential Trigger programming mode. Hold the LB button first, then hold the R3 button. Press M1 button again to confirm. Press M1 to enable LB and R3 to be triggered in sequence. | The backlight of the Right joystick stays blue and red, meaning the programming mode is entered. The backlight of the right joystick stays blue, meaning the programming is completed. |
6. Maintenance
6.1 Charging the Gamepad
Use the provided Type-C charging cable to connect the gamepad to a USB charging port.
6.2 Battery Status
| Charging Indicator | Description |
|---|---|
| Red light stays on | Charging |
| Red light goes out | Fully charged |
| When battery is below 15%, the current Charging Indicator will flash in RED quickly. | Low Battery |
6.3 Cleaning
- Use a soft, dry cloth while cleaning.
- Do not use chemicals such as gasoline or thinner.
7. Troubleshooting
7.1 Connection Issues
- If the gamepad does not connect, ensure it is fully charged.
- Verify that the correct pairing mode (key combination) is used for your device.
- If the gamepad has been switched to another mode, you need to use the key combination to restart.
- For PC connection, ensure the USB receiver is properly plugged in.
- For Bluetooth connection, ensure Bluetooth is enabled on your device and the gamepad is discoverable.
7.2 Button/Vibration/Backlight Issues
- If buttons are unresponsive, ensure the gamepad is properly connected and charged.
- Adjust backlight and vibration intensity using the keybinds described in section 5.1.
- If back buttons are not working as expected, re-program them as described in section 5.3.
- If the Turbo function is not working in Switch mode, ensure you have changed the Screenshot function to Turbo function first.
8. Specifications
| Attribute | Value |
|---|---|
| Brand Name | GameSir |
| GameSir Model | T4 Pro |
| Type | Gamepads |
| Interface Type | Bluetooth, 2.4G, Type C |
| Compatible Platform | Nintendo Switch, PC, Android, iOS, Steam |
| Compatible Brand/Model | Nintendo |
| Compatible Nintendo Model | Nintendo Switch, Nintendo Switch Lite |
| Battery Included | Yes |
| Battery Capacity | built-in 600mAh lithium battery |
| Support Software Configuration | Yes |
| High-concerned Chemical | None |
| D-pad Switch Type | MEMBRANE |
| ABXY Switch Type | MEMBRANE |
| Bumpers Switch Type | MEMBRANE |
| Wear-resistant Joysticks | No |
| RGB Lighting Joysticks | Yes |
| Hall Effect | No |
| Joystick Sensor Module Brand/Type | K-SLIVER |
| Trigger Button Type | Linear |
| Package | Yes |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |
| Six Axis Gyroscope | Yes |
| Vibration Motors | Yes |
| Turbo Button | Yes |
9. User Tips
- The controller's buttons are configured more like Xbox One controllers than Nintendo Switch controllers. Familiarize yourself with the layout.
- For PC gaming, the controller is very responsive, especially with the USB dongle.
- The phone holder is very convenient and can even hold a Nintendo Switch Lite with a case.
- The vibration intensity out of the box is very strong; adjust it to your preference using the Turbo button + D-Pad Up/Down combination.
- The controller feels solid and has good battery life.
- For PC games, if the game doesn't natively support controllers, you might need to add it to Steam to ensure the joystick is recognized.
- The backlight can be turned off or adjusted in brightness.
- Some users report that vibration might not work with emulators.
- The controller is recognized as an Xbox controller on PC, which is good for compatibility.
10. Warranty and Support
For warranty information, please refer to the warranty card included in the product packaging. For any quality concerns or suggestions, please contact GameSir or your local distributor.
A user manual in PDF format is available for download. Please refer to the official GameSir website or the provided PDF link for detailed instructions and troubleshooting guides: GameSir T4 Pro User Manual (PDF)
11. Important Safety Precautions
- Contains small parts. Keep out of reach of children under the age of 3. Seek immediate medical attention if swallowed or inhaled.
- Do not use the product near fire.
- Do not expose to direct sunlight or high temperatures.
- Do not leave the product in a humid or dusty environment.
- Do not hit or drop the product.
- Do not touch USB port directly or it might cause malfunctions.
- Do not strongly bend or pull cable parts.
- Use a soft, dry cloth while cleaning.
- Do not use chemicals such as gasoline or thinner.
- Do not disassemble, repair or modify.
- Do not use for purposes other than its original purpose. We are NOT responsible for accidents or damage when used for non-original purposes.
- Do not look directly at the optical light. It might damage your eyes.