1. Introduction
The Cherub WST-2058B is a versatile auto clip-on digital tuner designed for a wide range of stringed instruments. Featuring Cherub's latest software, it provides fast, accurate, and stable tuning. Its compact design and clear LCD display make it an essential tool for musicians.

Figure 1: Front view of the Cherub WST-2058B Tuner.
2. Package Contents
Please check the package for the following items:
- 1 x Cherub WST-2058B Clip-On Tuner
- 1 x User Manual
Note: A 3V (CR2032) battery is required for operation and is not included in the package.
3. Setup
3.1 Battery Installation
- Locate the battery compartment on the back of the tuner.
- Open the battery cover.
- Insert one CR2032 3V battery, ensuring the positive (+) side faces upwards.
- Close the battery cover securely.

Figure 2: Battery compartment indicating CR2032 battery (not included).
3.2 Attaching the Tuner
- Gently open the clip.
- Attach the tuner securely to the headstock of your instrument (guitar, bass, violin, or ukulele). Ensure good contact for optimal vibration detection.
- Adjust the display angle for comfortable viewing.

Figure 3: Tuner attached to a guitar headstock.
4. Operating Instructions
4.1 Power On/Off
Press and hold the power button (usually located on the side or front) to turn the tuner on or off. The tuner will automatically shut off after 5 minutes of no signal detection to conserve battery life.
4.2 Selecting Tuning Mode
The WST-2058B supports multiple tuning modes. Press the mode button (if available, otherwise it might auto-detect or cycle through modes) to select your instrument type:
- Chromatic (C): For all instruments and precise note tuning.
- Guitar (G)
- Bass (B)
- Violin (V)
- Ukulele C (Uc): For standard G-C-E-A tuning.
- Ukulele D (Ud): For D-G-B-E tuning.
4.3 Tuning Your Instrument
- Ensure the tuner is clipped securely to your instrument's headstock.
- Pluck a single string on your instrument.
- The tuner's LCD display will show the note name and a meter indicating whether the note is flat, sharp, or in tune.
- Flat: The needle/indicator will be to the left, and the backlight may be red or orange.
- Sharp: The needle/indicator will be to the right, and the backlight may be red or orange.
- In Tune: The needle/indicator will be in the center, and the backlight will turn green.
- Adjust your instrument's tuning peg until the display shows the correct note and the indicator is centered with a green backlight.
- Repeat for all strings.

Figure 4: Tuner display indicating an in-tune note.
4.4 A4 Calibration (Pitch Reference)
The A4 reference pitch can be adjusted from 430Hz to 450Hz. Consult your instrument's specific tuning requirements or ensemble standards for the correct A4 setting. Typically, 440Hz is the standard.
4.5 Flat Tuning
The tuner supports flat tuning options (b, bb) for instruments that require tuning below standard pitch.
5. Maintenance
- Cleaning: Wipe the tuner with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Battery Replacement: Replace the CR2032 battery when the display becomes dim or the tuner fails to power on. Refer to Section 3.1 for battery installation.
- Storage: Store the tuner in a cool, dry place away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods to prevent leakage.
6. Troubleshooting
- Tuner does not power on:
- Check if the battery is correctly installed with the positive (+) side up.
- Replace the CR2032 battery with a new one.
- Inaccurate tuning readings:
- Ensure the tuner is clipped firmly to the instrument's headstock, as close to the tuning pegs as possible.
- Minimize ambient noise, as external sounds can interfere with vibration detection.
- Pluck strings clearly and individually.
- Tuner turns off unexpectedly:
- The tuner has an auto shut-off feature after 5 minutes of inactivity to save battery. This is normal operation.
- If it turns off during active tuning, the battery might be low and needs replacement.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | WST-2058B |
| Tuning Range | A0 (27.5Hz) ~ C8 (4186Hz) |
| Tuning Mode | Chromatic, Guitar, Bass, Violin, Ukulele C, Ukulele D |
| Tuning Precision | ±1 cent |
| A4 Range | 430-450Hz |
| Flat Tuning | b, bb |
| Tuning Method | Auto |
| Power Supply | 3V (CR2032) Battery (not included) |
| Dimensions (W x D x H) | 50mm x 27mm x 37mm |
| Weight | 23g |
| Material | Plastic |
| Screen | Digital LCD display, 2-color backlit |
| Color | Black |

Figure 5: Tuner dimensions.
8. User Tips
- For best accuracy, tune in a quiet environment.
- Ensure the tuner is clipped firmly to the instrument's headstock to pick up vibrations effectively.
- Always pluck strings clearly and individually for precise readings.
- If the display is dim, it's likely time to replace the CR2032 battery.
- Take advantage of the auto shut-off feature to prolong battery life.
9. Warranty and Support
For warranty information or technical support, please refer to the manufacturer's official website or contact the seller directly. Keep your purchase receipt as proof of purchase.