UGREEN CM204

Contents

UGREEN USB to RJ45 Console Cable RS232 Serial Adapter

Model: CM204

1. Introduction

The UGREEN USB to RJ45 Console Cable (Model CM204) provides a direct connection between your computer's USB port and the RJ45 console port of various network devices. This cable eliminates the need for bulky RS232 adapters and is designed for configuring routers, switches, servers, and other network equipment that utilize a serial console interface.

UGREEN USB to RJ45 Console Cable

Figure 1: UGREEN USB to RJ45 Console Cable

2. Setup Instructions

2.1. Driver Installation

  • Windows 10/8/8.1 and Mac OS: This cable is generally plug-and-play. Drivers are typically installed automatically by the operating system upon first connection.
  • Windows Vista/7/XP and Linux: For these operating systems, drivers may need to be installed manually. The cable utilizes an FTDI-FT232RL chipset, and the latest drivers can be downloaded from the official FTDI website if not automatically detected.
Universal OS Compatibility

Figure 2: Universal Operating System Compatibility

2.2. Connecting the Cable

  1. Connect the USB-A end of the cable to an available USB port on your computer (laptop or desktop).
  2. Connect the RJ45 end of the cable to the console port (often labeled 'Console' or 'Serial') on your network device (e.g., router, switch, server, wireless LAN controller).
Easy Connection Diagram

Figure 3: Connecting Laptop to Router/Switch Console Port

The cable is compatible with console devices from various manufacturers, including Cisco, TP-Link, Ubiquiti, Linksys, Huawei, and HP ProCurve.

Device Compatibility Diagram

Figure 4: Input (Network Devices) and Output (Computer) Compatibility

3. Operating Instructions

Once the cable is connected and drivers are installed (if necessary), you can use terminal emulation software to access the console interface of your network device. Common terminal programs include PuTTY, Tera Term, SecureCRT, or the built-in Terminal on Linux/macOS.

  1. Identify the COM Port: After connecting the cable, check your computer's Device Manager (Windows) or use commands like ls /dev/tty* (Linux/macOS) to identify the assigned COM port (e.g., COM3, COM4, /dev/ttyUSB0).
  2. Configure Terminal Software: Open your preferred terminal emulation software and configure the serial connection settings. The typical settings for network device consoles are:
    • Baud Rate (Speed): 9600 (most common, but check your device's documentation)
    • Data Bits: 8
    • Parity: None
    • Stop Bits: 1
    • Flow Control: None
  3. Connect: Initiate the connection in your terminal software. You should now see the command-line interface (CLI) of your network device.

3.1. RJ45 Console Port Pin Definition

It is important to understand the pin definition for proper communication. Please confirm the pin definition of your network device before purchasing or connecting.

RJ45 Console Port Pinout Table

Figure 5: RJ45 Console Port Pin Definition

PINNAMEDESCRIPTIONCOLOR
1CTSClear To SendWhite
2DSRData Device ReadyOrange
3RXDReceive DataWhite
4GNDGroundBlue
5DCDData Carrier DetectionWhite
6TXDData TransmissionGreen
7DTRData Terminal ReadyWhite
8RTSRequest To SendBrown

4. Maintenance

  • Keep the cable in a dry environment and avoid exposure to extreme temperatures.
  • Do not bend or twist the cable excessively, especially near the connectors, to prevent internal damage.
  • Clean the cable and connectors periodically with a soft, dry cloth to remove dust and debris.
  • Store the cable properly when not in use to prevent tangling and damage.

5. Troubleshooting

5.1. No Connection or Device Not Recognized

  • Ensure the cable is securely plugged into both the computer's USB port and the network device's console port.
  • Verify that the drivers are correctly installed. Check Device Manager (Windows) for any yellow exclamation marks next to the COM port.
  • Try connecting the cable to a different USB port on your computer.
  • Restart your computer and the network device.

5.2. Garbled or Unreadable Output

  • Confirm that the serial port settings (Baud Rate, Data Bits, Parity, Stop Bits, Flow Control) in your terminal emulation software exactly match the settings required by your network device's console port. The most common baud rate is 9600, but some devices may use 19200, 38400, or 115200.
  • Ensure there are no other applications trying to access the same COM port.

5.3. Cable Not Working with Non-Network Devices

  • This cable is specifically designed for serial console management of network hardware (routers, switches, etc.). It is not a general-purpose USB-to-Ethernet adapter, nor is it designed for connecting USB storage, gaming consoles (e.g., Nintendo Switch, Xbox), modems (3G/4G), TVs, UPS devices, video cameras, or USB hubs.

6. Specifications

FeatureDetail
Model NumberCM204
Brand NameUGREEN
TypeUSB Adapter (Console Cable)
OriginMainland China
CertificationCE
Cable Length1.5 meters
ChipsetFTDI-FT232RL
ESD ProtectionBuilt-in ESD guard circuit (voltage capacity up to 4KV)
OS CompatibilityWindows (Vista, 7, 8, 8.1, 10), Mac OS, Linux
Device CompatibilityCisco, TP-Link, Ubiquiti, Linksys, Huawei, HP ProCurve, and other devices with RJ45 console ports
Internal View of FTDI Chipset and ESD Protection

Figure 6: Internal view showing FTDI-FT232RL chips and ESD guard circuit

7. User Tips

  • For Windows 10/8 and Mac OS, the cable is often plug-and-play, with drivers installing automatically. If you encounter issues, ensure your operating system is up to date.
  • Always verify the required serial port settings (especially baud rate) for your specific network device in its documentation to ensure a successful connection and readable output.
  • This cable is highly regarded for its reliability and compatibility across various network devices.

8. Frequently Asked Questions (FAQ)

Q: What is this cable used for?
A: It is used to connect your computer's USB port to the RJ45 console port of network devices like routers, switches, and firewalls for configuration and management.
Q: Do I need to install drivers?
A: For Windows 10/8 and Mac OS, drivers are usually installed automatically. For older Windows versions or specific Linux distributions, you might need to manually install FTDI drivers.
Q: What chipset does this cable use?
A: It uses the FTDI-FT232RL chipset.
Q: Can I use this cable to connect my computer to a regular Ethernet port for internet access?
A: No, this is a console cable for serial communication, not an Ethernet adapter for network connectivity.
Q: Is it compatible with Huawei devices?
A: Yes, it is generally compatible with Huawei and many other brands that use a standard RJ45 console port.

9. Warranty and Support

UGREEN products are designed and manufactured to high-quality standards. For warranty information or technical support, please refer to the official UGREEN website or contact their customer service directly. Keep your purchase receipt for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.