1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Dooya DC1650 Single-Channel and DC1651 Double-Channel RF433 Wall Emitters. These devices are designed to remotely control compatible Dooya RF433 curtain motors.
Figure 1: Dooya DC1650 (left, single-channel) and DC1651 (right, double-channel) RF433 Wall Emitters.
2. Package Contents
Upon opening the package, please verify that all components are present and undamaged. The standard package includes:
- Dooya DC1650 Single-Channel Wall Emitter or DC1651 Double-Channel Wall Emitter (depending on model purchased)
- Mounting back plate
- Screws for installation
- Wall plugs for installation
- Instruction Manual (this document)
Note: CR2430 battery is NOT included and must be purchased separately.
Figure 2: DC1651 Emitter, back plate, screws, and wall plugs.
3. Specifications
| Feature | Specification |
|---|---|
| Model Numbers | DC1650, DC1651 |
| Item Name | Dooya DC1650/DC1651 RF433 Wall Emitter |
| DC1650 Type | Single-channel wall emitter |
| DC1651 Type | Double-channel wall emitter |
| Battery Type | CR2430 (not included) |
| RF Frequency | 433.05-434.79 MHz |
| Control Distance (Outdoors) | Up to 200 meters |
| Control Distance (Indoors) | Up to 35 meters |
| Signal Penetration | Yes, signal can go through walls |
| Application | Remote control Dooya RF433 Fixed Code motors (e.g., KT320E, DT52E, DT360, KT82TN, TV) |
| Dimensions | 86 x 86 mm |
| Group Control (DC1650) | Up to 20 motors |
| Group Control (Per Channel) | Up to 20 motors |
| Dooya V1 Motor Compatibility | Not supported |
| Certification | CE |
| Origin | Mainland China |
4. Setup and Installation
4.1. Battery Installation
The Dooya Wall Emitter requires one CR2430 battery (not included). To install the battery:
- Carefully remove the back cover of the emitter.
- Insert the CR2430 battery into the battery compartment, ensuring correct polarity (+/-).
- Replace the back cover, ensuring it clicks securely into place.
Figure 3: Rear view of the DC1650 Emitter, indicating the battery compartment location.
4.2. Mounting the Emitter
The wall emitter can be mounted to a wall using the provided back plate, screws, and wall plugs.
- Choose a suitable location on your wall, ensuring it is within the effective indoor control range (up to 35m) of your Dooya RF433 motors.
- Position the mounting back plate at the desired height and mark the screw holes.
- Drill pilot holes at the marked locations. If mounting into drywall, insert the provided wall plugs.
- Secure the back plate to the wall using the screws.
- Align the emitter with the mounted back plate and gently push it until it clicks into place.
4.3. Pairing with Dooya RF433 Motors
Before operating your curtain motors with the wall emitter, you must pair them. The exact pairing procedure may vary slightly depending on your specific Dooya RF433 motor model. Generally, the steps involve:
- Put your Dooya RF433 motor into pairing mode (refer to your motor's instruction manual for specific steps, often involving a short press of a programming button on the motor or its existing remote).
- While the motor is in pairing mode, press the programming button on the wall emitter (usually a small recessed button, often on the back or side, requiring a pin to press).
- The motor should respond (e.g., jog slightly or beep) to confirm successful pairing.
- Test the Up, Down, and Stop buttons on the wall emitter to ensure proper control.
Important: This emitter is compatible only with Dooya RF433 Fixed Code motors. It does NOT support Dooya V1 motors.
5. Operation
The Dooya Wall Emitter provides intuitive control over your paired curtain motors.
5.1. Button Functions
- Up Arrow (▲): Moves the curtain motor upwards (e.g., opens curtains, raises blinds).
- Down Arrow (▼): Moves the curtain motor downwards (e.g., closes curtains, lowers blinds).
- Stop Button (■): Stops the curtain motor at its current position.
5.2. Channel Selection (DC1651 Double-Channel Emitter)
The DC1651 model features two channels, allowing control of two individual motors or two groups of motors independently.
- To select a channel, press the corresponding channel button (e.g., "1" or "2"). The selected channel will typically be indicated by an LED light.
- Once a channel is selected, the Up, Down, and Stop buttons will control the motor(s) paired to that specific channel.
5.3. Group Control
Both DC1650 and DC1651 emitters support group control. A single channel can control up to 20 individual Dooya RF433 motors simultaneously. To achieve this, simply pair multiple motors to the same channel on the emitter following the pairing instructions in Section 4.3.
6. Maintenance
To ensure optimal performance and longevity of your Dooya Wall Emitter, follow these simple maintenance guidelines:
- Battery Replacement: When the emitter's range decreases or it becomes unresponsive, it's likely time to replace the CR2430 battery. Follow the steps in Section 4.1 for battery installation.
- Cleaning: Wipe the surface of the emitter with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the device.
- Environment: Keep the emitter away from direct sunlight, extreme temperatures, and high humidity.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Emitter does not control motor(s). |
|
|
| Reduced control range. |
|
|
| DC1651 controls the wrong motor/group. | Incorrect channel selected. | Select the correct channel using the channel selection buttons. |
8. User Tips
- Compatibility Check: Always confirm that your curtain motor is a Dooya RF433 Fixed Code model before purchasing or attempting to pair this emitter. This emitter is not universally compatible with all smart blinds or motors (e.g., it will not work with Yooda blinds or Dooya V1 motors).
- Optimal Placement: While the signal can pass through walls, placing the emitter in a central location or within direct line of sight to the motors can improve signal reliability, especially in larger homes or areas with many obstructions.
- Battery Life: To maximize battery life, avoid unnecessary button presses. Consider keeping a spare CR2430 battery on hand for quick replacement.
9. Warranty and Support
For warranty information, technical support, or further assistance, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.