1. Introduction
1.1 Product Profile
This Android OS-based, tablet-style diagnostic tool incorporates the best possible coverage of OE-level diagnostics with multitasking capable software. Using the powerful 8-core 2.0GHz processor and a 10.1 inch sunlight readable capacitive touch screen with a resolution of 1920 x 1200 pixels, it delivers quick and complete diagnostic functionalities which technicians need to diagnose, research and repair vehicles in one solution. It has the following features: Intelligent Diagnose, Local Diagnose, SmartLink Super Remote Diagnose, X431 Remote Diagnose, Service Function, One-click Update, Diagnostic History, Diagnostic Feedback, TPMS, ADAS, Vehicle Coverage Lookup and Toolbox etc.
1.2 Package List
Common accessories are the same, but for different destinations, the accessories may vary. For detailed accessory items, please consult the seller or check the packing list supplied with this tool together.
| No. | Item | Description | Qt. |
|---|---|---|---|
| 1 | Display tablet | Indicates the test results. | 1 |
| 2 | SmartLink C V2.0 device | Connect to vehicle’s DLC (Data Link Connector) port to access vehicle’s live data. | 1 |
| 3 | Docking station | Charges the display tablet. | 1 |
| 4 | Diagnostic cable | Connect the VCI to vehicle’s DLC port. It can be separated into two parts: DB15F to HD15F data cable and HD15M to OBD16 adaptor. | 1 |
| 5 | Power adaptors | Charges the display tablet. | 2 |
| 6 | Data cable | Connects the VCI to the tablet to perform vehicle diagnosis. | 1 |
| 7 | Password envelope | A piece of paper bearing Product S/N and Activation Code, which is needed for product registration. | 1 |
| 8 | Crossover cable | Connects the VCI device to the modem when performing SmartLink Super Remote Diagnostics. | 1 |
| 9 | Quick start guide | 1 |

1.3 Components & Controls
There are two main components to the diagnostic system:
- Display Tablet – the central processor and monitor for the system.
- VCI (Vehicle Communication Interface) – the device for accessing vehicle data.
1.3.1 Display Tablet

- Memory Card Slot: Insert a memory card for storage extension.
- Data I/O Port: Connects to SmartLink C V2.0 device or add-on modules.
- Charging Port: For charging the tablet.
- Volume Buttons: Adjust the volume.
- Power/Screen Lock Button: Turn on/off or lock screen.
- Microphone: Convert voice into electrical signal.
- Charging LED: Illuminates red when charging, green when fully charged.
- Ambient Light Sensor: Senses ambient light.
- Front Camera: For snapshots.
- Touch Screen: Displays test results.
- Camera Flash: Provides artificial light.
- Rear Camera: For snapshots.
- Audio Speaker: Converts electrical audio signal to sound.
- Charging Slot: Aligns with docking station for charging.
- Adjustable Kickstand: For comfortable viewing angles.
1.3.2 VCI (Vehicle Communication Interface)
The SmartLink C V2.0 device features powerful functions and it can be applied in the following situations:
- When as a VCI (Vehicle Communication Interface), it needs to work in conjunction with the Diagnose module of the tablet, which is used to obtain vehicle data, and then send it to the tablet for analysis wirelessly or via data cable.
- When as a SmartLink C (Customer) dongle, it does not communicate with the tablet, but it needs to work together with the SmartLink module of the tablet. The tablet is mainly used to issue remote diagnostic requests, and the SmartLink C dongle is networked to receive and execute commands from the remote SmartLink B (Business).
- When as a local J2534 PassThru device, it can be used in conjunction with the PC installed with OEM diagnostic software.

- DB-15 diagnostic connector: Connects it to the vehicle's DLC (Data Link Connector) port via the diagnostic cable.
- Touch screen
- LAN/WAN port: Connects it to the modem via the crossover cable. It only applies to the SmartLink Super Remote Diagnostics.
- DC-IN power jack: It can obtain power via connecting the diagnostic cable to the vehicle's DLC port or connecting to an external DC power supply.
- Data I/O port: Connects it to the tablet to perform vehicle diagnosis or to the PC to perform J2534 reprogramming.
Warning: It is prohibited to connect this power jack to an external DC power supply when the SmartLink C V2.0 device is properly connected to the vehicle's DLC port. No responsibility can be assumed for any damage or loss caused as a result of not strictly following the warning.
2. Setup
2.1 Charging the Tablet
To check the battery power level, press and hold the Power button about 3 seconds to turn on the tablet. Power level is indicated as a percentage in the upper right corner of the screen. If the power level drops below 10% while the tablet is on, a "Connect Charger" notification will appear on the screen.
2.1.1 Charging with the included power adaptor
- Connect one end of the power adaptor to charging port of the tablet, and the other end to the AC outlet.
- The charging LED illuminates on the tablet solid red and a charging symbol will appear on the screen.
- Once it illuminates solid green, it indicates that the battery is fully charged and the charging complete symbol replaces the charging symbol. Disconnect the power adaptor from the AC outlet.
- Press and hold the POWER button for about 3 seconds to turn on the tablet. The system starts initializing and then enters the home screen. To turn the tablet off, press and hold the POWER button until an option menu appears. Tap Power Off.
2.1.2 Charging with the docking station
- Locate the charging slot on the bottom of the tablet and docking station.
- Align the charging slots, and then dock the tablet into the station to ensure that it is firmly seated on the docking station.
- Insert one end of the included power cord to the charging port of the docking station, then the other end into the AC outlet. The charging LED on the tablet illuminates solid red while charging and a charging symbol will appear on the screen.
- Once it illuminates solid green, it indicates that the battery is fully charged and the charging complete symbol replaces the charging symbol. Disconnect the power adaptor from the AC outlet.
2.2 Screen Layout
On-screen keys and status bar on the bottom of the screen are as follows:

- Tap the globe icon to visit the official website.
- Tap the camera icon to capture the current screen and all captured screenshots are stored in the Screenshots folder.
- The VCI icon shows whether the VCI is connected properly or not.
- Tap the square icon to display a list of applications that are currently running or recently used. Tap certain application to open it. Swipe it upwards to close it.
- Tap the circle icon to jump to the home screen.
- Tap the triangle icon to return to the previous screen or exit the application.
2.3 Adjusting Screen Brightness
The tablet is equipped with a built-in light intensity sensor. It can adjust the screen brightness according to the ambient light intensity automatically. Alternatively, you can also adjust it manually.
- On the home screen, tap Other Modules -> Tablet Settings -> Display -> Brightness level.
- Drag the slider to adjust it. Alternatively, user may also slide the Automatically brightness switch to ON, and the system will automatically adjust the screen brightness.
2.4 Changing Language
The tablet supports multiple languages. To change the language of the tablet, please do the following:
- On the home screen, tap Other Modules -> Tablet Settings -> Language & input -> Language.
- Tap the desired language from the list and the system will change to the chosen language.

2.5 Network Setup
The tablet has built-in Wi-Fi that can be used to get online. Once you're online, you can register the tablet, browse the Internet, get and update apps on your network.
- On the home screen, tap Other Modules -> Tablet Settings -> WLAN.
- Tap or slide the Wi-Fi switch to ON, the tablet starts searching for all available wireless LANs.
- Choose the desired Wi-Fi access point / network. If the network you chose is open, you can connect directly. If the selected network is encrypted, you have to enter the right security key (network password).
When this tool is in range, it will connect to the previously linked network automatically.
3. Register & Update
For new users, you will need to experience a user registration process before getting started.
3.1 Register & Update
After the tablet is initialized, tap the Login button on the upper right corner of the screen. If you are a new user, tap New Registration to enter the sign-up page. Input the required information to create an account and then input the Product Serial Number and Activation Code (found in the supplied Password Envelope) to activate the VCI. After successful registration, wireless communication between the tablet and VCI is automatically established.
4. Connections
4.1 Preparation
- The ignition is turned on.
- The vehicle battery voltage range is 9-14V or 18-30V.
- The throttle is in closed position.
- Find DLC location: For passenger cars, the DLC (Data Link Connector) is usually located 12 inches from the center of the instrument panel, under or around the driver's side for most vehicles. For some vehicles with special designs, the DLC location may vary. For commercial vehicles, the DLC is always located in driver's cab.

4.2 Vehicle Connection
The method used to connect the VCI device to a vehicle's DLC depends on the vehicle's configuration.
- For OBD II vehicles: Use the included diagnostic cable (DB15F to HD15F data cable and HD15M to OBD16 adaptor) to connect the VCI to the vehicle's DLC port.

4.3 Communication Setup
There are two kinds of ways available for the tablet to communicate with the VCI device: wireless and wired (USB). After the user registration is successfully finished, the wireless communication between the tablet and the VCI device is automatically established and user has no need to configure it again. The USB connection is a simple & quick way to establish communication between the tablet and the VCI. After properly connecting the data cable from the tablet to the VCI, the VCI navigation button at the bottom of the screen will be enabled indicating the USB connection is successful.
Note: The USB connection provides the most stable and fastest communication. When all communication methods are applied at the same time, the tablet will use the wired communication as the default priority.
3. Operating
5. Diagnosis
5.1 Intelligent Diagnose
Through simple wireless communication between the tablet and VCI, you can easily get the VIN (Vehicle Identification Number) information of the currently identified vehicle. Once the VIN is successfully identified, the system will retrieve it from the remote server and then guide you to vehicle information page without performing the step-by-step manual menu selection. The vehicle information page lists all historical diagnostic records of the vehicle, which lets the technician have a total command of the vehicle faults. In addition, a quick dial to Local Diagnose and diagnostic function are also available on this page for reducing the roundabout time and increasing productivity.
5.2 Local Diagnose
Tap Local Diagnose to enter the vehicle selection page. Two approaches are provided for you to access the vehicle diagnostic software: VINSCAN for quick access or manual selection.
5.3 Remote Diagnose
SmartLink is a powerful service system dedicated to remote vehicle diagnosis. If a technician (SmartLink C V2.0) needs assistance, they can seek a trusted second opinion or additional expertise from remote master technicians or shops (SmartLink B).

For a detailed demonstration of the online parametric configuration function, please watch the video below:
6. Service Function
This module provides quick access to commonly performed service functions, including coding, reset, and relearn procedures. These functions help vehicles return to functional status after repair or replacement. The available service functions are subject to change with updates.
- Maintenance Light Reset (Oil Reset): Resets the oil service light for the engine oil life system.
- Electronic Parking Brake Reset: Resets the brake pad after replacement.
- Steering Angle Calibration (SAS Reset): Resets the steering angle to zero.
- ABS Bleeding: Performs tests to check ABS operating conditions and bleed the system.
- Tire Pressure Reset (TPMS RESET): Resets tire pressure and turns off the TPMS MIL.
- Crank Position Sensor Adaptive Learning (GEAR LEARN): Performs tooth learning for the car.
- Anti-theft Matching (IMMO): Performs anti-theft key matching.
- Injector Coding (INJECTOR): Writes injector actual code or rewrites code in the ECU.
- Battery Matching (BAT. RESET): Resets the monitoring unit of the car battery.
- DPF Regeneration (DPF REG.): Helps remove PM from the DPF filter.
- Throttle Matching (ELEC. THROTTLE RLRN): Initializes the throttle actuator.
- Gearbox Matching (GEARBOX): Completes self-learning of the gearbox.
- AFS (Adaptive Front-lighting System) Reset: Initializes the adaptive headlamp system.
- Sunroof Initialization (SUNROOF): Sets sunroof functions like lock-off, close in rain, and memory.
- Suspension Level Calibration (SUS RESET): Adjusts vehicle body height sensor for level calibration.
- Headlight Matching (AFS RESET): Initializes the adaptive headlight system.
- Windows Calibration: Performs door window matching to recover ECU initial memory.
- Seats Calibration: Matches seats with memory function.
- Tyre Reset: Sets size parameters of modified or replaced tires.
- Language Change: Changes the system language of the vehicle central control panel.
- A/F Reset: Sets or learns Air/Fuel ratio parameters.
- Coolant Bleed: Activates the electronic water pump for cooling system venting.
- Transport Mode: Deactivates transport mode to recover normal vehicle functions.
- AdBlue Reset (Diesel Engine Exhaust Gas Filter): Performs urea reset operation.
- NOx Sensor Reset: Resets the catalytic converter learned value.
- Stop/Start Reset: Opens or closes the automatic start-stop function.
- IMMO Programming: Performs read-write function for vehicle key, EEPROM, MCU, and EEPROM/FLASH data.
- AC System Relearn/Initialization: Performs AC system relearn/initialization.
- Intelligent Cruise Control System: Matches the intelligent cruise control system.
- Engine Power Balance Monitoring: Monitors crankshaft acceleration to determine relative power.
- Gas Particulate Filter Regeneration: Performs GPF replacement or regeneration.
- Motor Angle Calibration: Performs motor angle calibration.
- High Voltage Battery Diagnostics (HIGH VOLTAGE BATTERY): Used for high voltage battery diagnosis.
- Turbocharging Matching: Matches and learns replaced parts of the boost system.
- Clutch Matching: Used for learning clutch pedal position or switch.
- FRM Matching: Clears the fault of light short circuit.
- Rainfall Light Sensor: Adjusts parameters of the rain sensor and light sensor.
- Gateway Module Data Calibration: Changes the VIN after gateway control unit replacement.
- ECU Reset: Resets the control unit after coding function execution.
12. J2534 Reprogramming Using SmartLink C
Flash programming has become a common and profitable procedure in the repair and service of today's vehicles. SmartLink C V2.0 is a communication interface designed to support J2534 specifications for ECU reprogramming. It can be used as a J2534 PassThru device, working together with a PC installed with OEM diagnostic software to perform reprogramming. The PC needs the LAUNCH J2534 tool, downloadable from www.cnlaunch.com.

13. Synchronization
You can transfer media files and APK between the tablet and a computer.
- Connect the tablet to a computer via the included USB cable.
- Swipe the screen from the top, tap the USB icon -> USB Management.
- Deselect the USB Switch.
- Swipe the screen from the top, tap the USB charging icon.
- Tap USB charging this device, then select Transfer files.
- Now you can copy files between the tablet and the computer.
4. Maintenance
7. Software Update
This module enables you to update the diagnostic software & App and frequently used software.
7.1 Update Diagnostic Software & APP
Go to Software Update on the Job Menu and tap the Downloaded tab. The Available tab displays a list of software that can be updated, categorized into Common, Frequently Used, and Other vehicle software. Tap Update to start downloading and installation.
7.2 Update Frequently Used software
If you only intend to update frequently used software, go to Software Update and tap the Downloaded tab, then select and update the desired software.
7.3 Renew Subscription
If the software subscription is due or expires, the system will prompt you to renew your subscription. Tap Renewal on the bottom of the screen to enter the Mall to renew the subscription.
10.11.5 Clear Cache
This item is used to clear the App cache. Tap Clear Cache, a pop-up window will appear on the screen. Tap OK to clear cache and the system will restart the App.
5. Troubleshooting
14. FAQ
- How to save power? Turn off the screen while idle, set a shorter standby time, decrease screen brightness, and turn off WLAN if not required.
- Communication error with vehicle ECU? Confirm VCI is correctly connected, ignition switch is ON. If issues persist, use the Feedback feature.
- Failed to enter into vehicle ECU system? Confirm vehicle is equipped with the system, VCI is correctly connected, ignition switch is ON. If issues persist, use the Feedback feature.
- How to reset the tablet? Go to Settings -> Back & Reset -> Factory data reset -> Reset tablet -> Clear all data. (Warning: Resetting may cause data loss, back up important data first).
- How to download the diagnostic App after resetting the tablet? Launch the browser, go to www.x431.com, login, download and install the APP application program.
- What to do if the language of vehicle diagnostic software does not match the system language? After setting the system language, go to the update center to download the corresponding vehicle diagnostic software.
- How to retrieve the login password? Launch the app, tap Login -> Retrieve password, input product S/N and follow on-screen prompts.
- What network conditions are required for SmartLink Diag.? A network broadband of 100 MB or above is required.
- What does “Delay” displayed on the SmartLink C V2.0 screen mean? It indicates network quality: Green (normal), Yellow (unstable), Red (serious delay/disconnected).
- Why is the network connection so poor? Too many users on the LAN or downloading. Use a stable network for remote SmartLink diagnosis.
- Why does the sign appear on the upper right corner of the SmartLink C V2.0 screen? Some networks have firewall restrictions. Use networks directly installed by telecommunication operators.
- Some systems of some old vehicles cannot be tested? SmartLink C V2.0 supports CANBUS and DoIP protocols; some old vehicles use K-Line protocol.
- Is it necessary to re-ignite the car after the diagnostic system starts working? For some vehicle conditions, re-ignition provides a more detailed analysis after OBD diagnosis.
6. Specifications
1.4 Technical Specifications
| 1. Display Tablet | |
|---|---|
| CPU | 8-core Processor, 2.0GHz |
| Display | 10.1 inch touch screen with a resolution of 1920 x 1200 |
| Memory | 4GB |
| Hard disk | 128GB |
| Connectivity | Wi-Fi (802.11 b/g/n/ac), Universal serial BUS ports (1 x Type-C + 1 x Type-A) |
| Camera | 8MP front-facing camera + 13MP rear-facing camera |
| Sensor | Gravity accelerometer + 3-axis acceleration sensor |
| Operating temperature | 0℃ ~ 50℃ |
| Storage temperature | -20℃ ~ 70℃ |
| 2. VCI (Vehicle Communication Interface) | |
|---|---|
| Size | 200mm x 110mm x 47mm |
| Working voltage | DC 9~36V |
| Power consumption | ≤ 6W |
| Communication | Wireless and wired |
| Working temperature | 0℃ ~ 50℃ |
7. Warranty and Support
Warranty
THIS WARRANTY IS EXPRESSLY LIMITED TO PERSONS WHO PURCHASE LAUNCH PRODUCTS FOR PURPOSES OF RESALE OR USE IN THE ORDINARY COURSE OF THE BUYER'S BUSINESS. LAUNCH electronic product is warranted against defects in materials and workmanship for one year from date of delivery to the user. This warranty does not cover any part that has been abused, altered, used for a purpose other than for which it was intended, or used in a manner inconsistent with instructions regarding use. The exclusive remedy for any automotive meter found to be defective is repair or replacement, and LAUNCH shall not be liable for any consequential or incidental damages. Final determination of defects shall be made by LAUNCH in accordance with procedures established by LAUNCH. No agent, employee, or representative of LAUNCH has any authority to bind LAUNCH to any affirmation, representation, or warranty concerning LAUNCH automotive meters, except as stated herein.
Customer Service
If you have any questions on the operation of the unit, please contact your local dealer, or contact LAUNCH TECH CO., LTD. directly:
- Website: www.x431.com or www.cnlaunch.com
- Phone: +86 755 2593 8674
- Email: DOD@cnlaunch.com
For further detailed instructions and documents, you may also refer to the official user manual PDF: User manual (PDF)
8. User Tips
- The LAUNCH X431 PAD V ELITE is highly recommended for professional use due to its extensive functions and broad vehicle coverage (approximately 90% of cars).
- It performs well with various car brands, including BMW X5 2024, VAG group (Volkswagen, Audi), and Toyota.
- The device supports multiple languages, including English, Russian, and Portuguese, with free switching.
- The registration process is intuitive, and software updates are functional and keep the device current.
- The device features a topology mode for easy visualization of module communication.
- For 24V trucks, an optional cable and software purchase are required to activate the truck diagnostic capabilities.
- Be aware of IP restrictions for EU RU UK versions; the Global Version offers worldwide usability.