K&F CONCEPT ND2-ND32 Fader ND Filter

Contents

K&F CONCEPT ND2-ND32 Fader ND Filter Instruction Manual

Model: ND2-ND32 Fader ND Filter

Brand: K&F CONCEPT

1. Introduction

The K&F CONCEPT ND2-ND32 Fader ND Filter is a variable neutral density filter designed to reduce the amount of light entering your camera lens without affecting the color balance. This allows for greater control over exposure settings, enabling slower shutter speeds and wider apertures in bright conditions. It is ideal for various photographic scenarios, including landscape, portrait, and video recording.

K&F CONCEPT ND2-ND32 Fader ND Filter with packaging and cleaning cloths
The K&F CONCEPT ND2-ND32 Fader ND Filter, shown with its protective case and cleaning cloths.

Product demonstration video highlighting key features and usage.

2. Setup and Installation

  1. Determine Your Lens Size: Before installing, identify the thread size of your camera lens. This number is typically marked on the lens barrel, often preceded by a "Ø" (diameter) symbol. For example, "Ø58" indicates a 58mm thread size. Ensure your filter matches this size.
    Diagram showing how to find the lens thread size marked with a diameter symbol (Ø)
    Locating the lens thread size on your camera lens.
  2. Clean Your Lens: Use a microfiber cloth (such as the included cleaning cloths) to gently clean the front element of your camera lens to remove any dust or smudges.
  3. Attach the Filter: Carefully align the filter's threads with the threads on your lens. Rotate the filter clockwise until it is securely attached. Do not overtighten.

3. Operating Instructions

The ND2-ND32 Fader ND Filter allows you to adjust the neutral density from ND2 (1 stop) to ND32 (5 stops) by rotating the outer ring of the filter. This variable density provides flexibility in controlling exposure.

  • Adjusting Density: Rotate the outer ring of the filter to increase or decrease the neutral density. The filter has markings (ND2, ND4, ND8, ND16, ND32) to indicate the approximate stop reduction.
    Diagram showing the variable ND filter with markings for ND2, ND4, ND8, ND16, ND32
    The filter's outer ring with density markings for accurate light reduction.
  • Achieving Desired Exposure:
    • For slower shutter speeds (e.g., to blur motion in water or clouds), increase the ND density.
    • For wider apertures (e.g., to achieve shallow depth of field in bright light), increase the ND density.
    Comparison image showing a waterfall without an ND filter (fast shutter speed) and with an ND filter (slow shutter speed, blurred water)
    Example of using an ND filter to achieve motion blur in water.
  • Avoiding "X" Cross Effect: K&F Concept's advanced technology minimizes the "X" cross effect common in some variable ND filters, especially at higher density settings or wider angles. If you observe this effect, slightly reduce the ND density.
    Comparison image showing a scene without black X cross (K&F CONCEPT) and with black X cross (Others)
    Visual comparison demonstrating the absence of the "X" cross effect with K&F CONCEPT filters.

4. Maintenance and Care

  • Cleaning: Use a clean, soft microfiber cloth to wipe the filter surfaces. For stubborn smudges, a small amount of lens cleaning solution can be applied to the cloth (not directly to the filter). The filter features 28 multi-layer nanometer coatings, making it waterproof, oil-resistant, and scratch-resistant for easier cleaning.
    Demonstration of water and dust proof coatings on the filter
    Water beading on the coated filter, indicating its waterproof properties.
  • Storage: When not in use, store the filter in its provided carrying box to protect it from dust, scratches, and impacts.
  • Handling: Always handle the filter by its edges to avoid leaving fingerprints on the glass surface.

5. Troubleshooting

"X" Cross or Uneven Exposure:

This can occur with variable ND filters, especially at their maximum density settings or when used with very wide-angle lenses. The K&F CONCEPT filter is designed to minimize this, but if it appears, try reducing the ND density slightly. Ensure the filter is rotated smoothly and not pushed beyond its marked limits.

Vignetting (Dark Corners):

Vignetting can sometimes occur, particularly with wide-angle lenses or when stacking multiple filters. The ultra-slim frame design of this filter helps reduce vignetting. If present, try adjusting your focal length or removing any additional filters.

Filter Stuck on Lens:

Avoid overtightening the filter. If it becomes stuck, try using a rubber grip or a filter wrench to gently loosen it. The CNC-machined non-slip aviation aluminum frame is designed to prevent jamming.

6. Specifications

FeatureDetail
Model NumberND Filter
TypeND2-ND32 (Variable Neutral Density)
MaterialJapanese AGC Optical Glass
Coatings28 Multi-Layer Nanometer Coatings (Waterproof, Scratch-resistant, Anti-reflective)
Frame MaterialCNC-Machined Aviation Aluminum (Ultra-slim, Non-slip)
CompatibilityNikon, Canon, Sony, Olympus DSLR Cameras (various thread sizes available)
Available Sizes37mm, 40.5mm, 43mm, 46mm, 49mm, 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, 77mm, 82mm, 86mm, 95mm, 105mm
Package Weight0.22 kg
Package Dimensions8cm x 8cm x 4cm

7. User Tips

  • Extreme Brightness: For shooting in extremely bright conditions (e.g., full summer sun at midday), consider using an additional fixed ND filter (like an ND8) in conjunction with the variable ND filter if you need to achieve very slow shutter speeds or very wide apertures (e.g., f/2.8).
  • Versatile Use: This filter is highly effective for normal sunny days, dusk, or cloudy conditions, providing ample light reduction for most creative needs.
  • Quality Investment: Users have noted the high quality of this filter, making it a worthwhile investment for enhancing photographic capabilities.

8. Warranty and Support

K&F CONCEPT products typically come with a warranty. A 2-year free warranty period is generally covered. You can register your product on the official website to extend the warranty period and obtain further product information, usage, and maintenance instructions. For technical support or inquiries, please visit the official K&F CONCEPT support channels.

9. Frequently Asked Questions (FAQ)

Q: How do I choose the correct filter size for my camera lens?

A: The filter size is determined by your camera lens's thread size. This is usually printed on the front of your lens or on the lens cap, indicated by a "Ø" (diameter) symbol followed by a number (e.g., Ø58mm). You must purchase a filter that matches this number. If your lens is 18mm-45mm, you still need to check the filter thread size on the lens itself, as the focal length does not directly indicate the filter diameter.

Q: Will this filter work with my Fujifilm XT-30 with an 18-55mm lens?

A: Yes, if your 18-55mm lens has a 58mm filter thread (Ø58mm), then a 58mm version of this filter will be compatible. Always verify the specific filter thread size on your lens.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.