1. Product Overview
The Dooya DM45 series tubular motors are designed for various automated shading and lifting applications, including rolling blinds, canopies, and lift systems. This series includes different models such as DM45R (RF433 with 3 wires), DM45S (4 wires, no RF433), DM45RQ, and DM45Q, each tailored for specific control and installation requirements.
Product Video
An overview of the Dooya DM45 Tubular Motor and its applications.
Package Contents
- Tubular motor (based on the chosen bundle)
- Crown (1 pc)
- Drive adapter (1 pc)
Note: The crown and drive adapter provided will be compatible with the tube type selected in your bundle. Please verify compatibility with your existing rolling tube if applicable.
Motor Type Distinction
AC tubular motors are categorized into external and built-in types. The main distinction lies in the wiring and the presence of an internal receiver:
- **Built-in Motor (e.g., DM45R)**: Features a built-in receiver, allowing direct control via remote control or wireless switch. It typically has 3 wires (Blue = zero line, Brown = Fire Wire, Yellow/Green = ground wire).
- **External Motor (e.g., DM45S)**: Requires an external switch or receiver for control. It typically has 4 wires (Blue = Neutral, Brown = Fire Wire 1, Black = Fire Wire 2, Yellow/Green = ground wire).

2. Setup and Installation
Safety Precautions
Attention: Improper handling can lead to damage or injury.
- Do not submerge the motor in water.
- Avoid striking the motor with hard objects like a hammer.
- Do not drill into the motor casing.
- Prevent exposure to sparks or open flames near the motor.

Tube Compatibility and Adapter Selection
It is crucial to select the correct crown and drive adapter for your rolling tube. Different tubes, even with the same outer diameter, may have varying inner structures. Please compare your tube with the diagrams below to ensure compatibility.

Examples of Crown and Drive Adapters for different tube types:
- For 50mm Round Tube:

Drive adapter for 50mm Round Tube. - For 55mm Groove Tube:

Crown and Drive Adapter for 55mm Groove Tube. - For 60mm Octagonal Tube:

Crown and Drive Adapter for 60mm Octagonal Tube. - For 60mm Groove Tube:

Crown and Drive Adapter for 60mm Groove Tube. - For 63mm Groove Tube:

Crown and Drive Adapter for 63mm Groove Tube. - For 70mm Groove Tube:

Crown and Drive Adapter for 70mm Groove Tube. - For 85mm Groove Tube:

Crown and Drive Adapter for 85mm Groove Tube. - For 90mm Groove Tube:

Crown and Drive Adapter for 90mm Groove Tube.
Bracket Installation
Follow these steps for secure bracket installation:
- Attach the brackets to the mounting surface.
- Insert the motor into the brackets, ensuring it is firmly seated.
- Secure the motor in place with appropriate fasteners.

Crown and Drive Adapter Installation
Install the crown and drive adapter onto the motor shaft and into the tube as follows:
- Slide the crown onto the motor shaft.
- Insert the drive adapter onto the motor shaft.
- Carefully slide the motor assembly into the rolling tube, ensuring the crown and drive adapter engage correctly with the tube's internal structure.
- Secure the drive adapter to the tube using rivets or screws if necessary.

Circuit Installation
Wiring should be performed by a qualified electrician. Ensure the power supply matches the motor's specifications (230V/50Hz or 120V/60Hz as per product nameplate).
For DM45R (Built-in RF433, 3-wire motor)

For DM45S (Standard, 4-wire motor)


3. Operating Instructions
Limit Setting (Upper and Lower)
The motor's travel limits (up and down) must be set after installation. Use the special regulator on the motor head and your emitter/switch.
Up Limit Setting
- Switch on the power.
- Press the UP button on the emitter or switch once.
- Use the special regulator to adjust the "+" direction. Rotate the white worm to increase the up distance.
- When the desired up limit is achieved, stop rotating the white worm and press the STOP button on the emitter or switch. The motor will beep, indicating the setting is complete.

Down Limit Setting
- Switch on the power.
- Press the DOWN button on the emitter or switch once.
- Use the special regulator to adjust the "-" direction. Rotate the red worm to increase the down distance.
- When the desired down limit is achieved, stop rotating the red worm and press the STOP button on the emitter or switch. The motor will beep, indicating the setting is complete.

Programming the First Transmitter (DM45R Motors)
This applies to DM45R motors with built-in RF433 receivers.
Method 1: Up Limit Button Control
- Switch off power for >10s, then switch on for <4s.
- Press the P2 button on the transmitter twice continuously. The motor will beep twice.
- Press the UP button. The motor will beep several times.
- Press the setting button once. The motor will beep once.
- The up limit button control is now set.
Method 2: Down Limit Button Control
- Switch off power for >10s, then switch on for <4s.
- Press the P2 button on the transmitter twice continuously. The motor will beep twice.
- Press the DOWN button. The motor will beep several times.
- Press the setting button once. The motor will beep once.
- The down limit button control is now set.


Dot-Move Setting
This function allows for precise, incremental movement of the motor.
- Switch on the power.
- Press the setting button once. The motor will beep once.
- Press the UP button. The motor will beep several times.
- Press the setting button once. The motor will beep several times.
- The dot-move setting is now active.

Adding an Emitter
To add additional emitters to control the motor:
- Switch on the power.
- Press the setting button on an already programmed emitter twice continuously. The motor will beep twice.
- Press the setting button on the new emitter once. The motor will beep several times.
- The new emitter is now added.

Cancelling an Emitter
To remove an emitter from the motor's memory:
- Switch on the power.
- Press the setting button on the emitter you wish to cancel once. The motor will beep once.
- Press the STOP button. The motor will beep once.
- Press the setting button several times. The motor will beep, indicating the emitter is cancelled.

4. Maintenance
To ensure the longevity and optimal performance of your Dooya DM45 tubular motor, follow these general maintenance guidelines:
- Keep the motor and surrounding area clean and free from dust and debris.
- Regularly inspect the wiring for any signs of wear or damage.
- Ensure that the rolling blinds, canopy, or lift system operates smoothly without obstruction.
- Avoid applying excessive force to the system, as this can strain the motor.
- Do not attempt to open or repair the motor casing yourself, as this may void the warranty and pose a safety risk.
5. Troubleshooting
Refer to the table below for common issues and their solutions:
| No. | Fail-phenomena | Failure Causes | Solutions Failure Recovery |
|---|---|---|---|
| 1 | Switch on, the drive adapter runs in one-way operation | Inside limit switch of motor doesn't open | Crown running one circle in the opposite direction of the drive adapter, then it works |
| 2 | Motor starts slowly or not work after connect power | a. Power voltage is slow b. Wiring error c. Overload d. Improper installation | a. Adjust power to rated data b. Check circuit and correct wiring connecting c. Rated torque associated with the installation of the load d. Re-install the motor |
| 3 | Motor stops suddenly after running | Motor stops suddenly after running | Motor will automatically resume work after 20 minutes cooling |
| 4 | Abnormal sound during roller blinds in operation | Outer tube is too long, led the rolling shutter connects with both sides of bracket too tightly | If idler is active, propering make the tube shorter to avoid too tight status. |

6. Specifications
The Dooya DM45 series tubular motors are available in various configurations. Key specifications are detailed below:
| Attribute | Value |
|---|---|
| Model Number | DM45 Tubular motor |
| Brand Name | NONE (DOOYA is the manufacturer) |
| Voltage | 220-240V |
| Working Voltage | 220/230V 50/60HZ |
| Motor Diameter | 45mm |
| Certification | CE |
| DM45R Motor Type | RF433 motor with 3 wires (Built-in receiver) |
| DM45S Motor Type | 4-wire Tubular Motor (no RF433) |
| Battery Included | No |
| Origin | Mainland China |
Detailed Model Specifications
Refer to the product nameplate and specification sheets for precise details on each model variant (e.g., DM45R 20/15, DM45S 20/26, DM45RQ 6/28, DM45Q 6/28), including Rated Torque (Nm), Rolling Speed (r/min), Rated Power (W), Rated Current (A), IP Rating, and Insulation Degree.




7. User Tips
- **Tube Adapter Customization**: If the provided crown and drive adapter do not perfectly fit your rolling tube, consider modifying them or using a 3D printer to create custom adapters for a precise fit. Alternatively, local markets may offer suitable alternatives.
- **Smart Home Integration**: For smart home compatibility, ensure you select a DM45S motor (4-wire) and pair it with a compatible Tuya WiFi curtain wall switch (e.g., DC227A, DC228A) and remote controllers (e.g., DC2700, DC2760).
- **Voltage Options**: The DM45S motors are available in both 230V/50Hz and 120V/60Hz configurations. Verify your local power supply requirements before purchasing.
- **Measuring for Installation**: When planning installation, determine if you need an inner frame or outer frame installation. Measure the width and height accordingly. For outer frame installation, measure the outer frame dimensions. For inner frame installation, measure the actual window dimensions and consider a 6cm-10cm depth for inner installation.

8. Warranty and Support
For any issues or questions regarding your Dooya DM45 tubular motor, please contact the seller directly. They will provide the best after-sales service and support for troubleshooting, returns, and refunds if necessary. Do not attempt unauthorized repairs, as this may void your warranty.