DOOYA DC1602

Contents

Dooya DC1602 15-Channel Remote Controller User Manual

Model: DC1602 | Brand: DOOYA

Product Overview

The Dooya DC1602 is a versatile 15-channel remote controller designed for use with Dooya RF433 motors, such as the DT52E and DT82TN models. This emitter allows you to control up to 15 individual or grouped motors, providing convenient operation for motorized curtains, blinds, or other compatible devices. Its sleek design and intuitive button layout make it easy to manage your smart home environment.

Dooya DC1602 15-Channel Remote Controller front view
Front view of the Dooya DC1602 15-Channel Remote Controller.

Setup and Pairing

Before using your DC1602 remote controller, you will need to install the battery and pair it with your Dooya RF433 motor(s).

1. Battery Installation

  1. Locate the battery compartment on the back of the remote controller.
  2. Open the compartment cover.
  3. Insert one CR2450 button battery, ensuring correct polarity.
  4. Close the battery compartment cover securely.

2. Pairing the Remote Controller with a Motor

This process links a specific channel on your remote to a motor. The video below demonstrates this process.

Video demonstrating the pairing process for the DC1602 remote with a motor.
  1. Select Channel: On the remote controller, use the channel selection buttons (up/down arrows next to the channel number display) to choose the desired channel (e.g., '07' as shown in the video) you wish to pair with a motor.
  2. Activate Motor Pairing Mode: Using a small tool (like a toothpick), press and hold the 'SET' button located at the tail end of the motor for approximately 3 seconds. The motor's indicator light will flash once, indicating it's in pairing mode.
  3. Initiate Remote Pairing: On the back of the remote controller, quickly press the 'P2' button twice.
  4. Confirm Pairing: On the front of the remote controller, press the 'Up' button once. The motor should respond (e.g., jog slightly), confirming successful pairing.
  5. Test Operation: Use the Up, Down, and Stop buttons on the selected channel to verify control over the motor.

Repeat this process for other channels and motors as needed. The principle for pairing other channels is the same.

Operating Instructions

The DC1602 remote controller provides simple and intuitive control over your motorized devices.

Dooya DC1602 15-Channel Remote Controller with wireless signal icon
The remote controller ready for operation.
  • Channel Selection: Use the 'Up' and 'Down' arrow buttons next to the digital display to cycle through the 15 available channels. The display will show the currently selected channel number.
  • Up Button (▲): Press to move the motor upwards (e.g., open curtains, raise blinds).
  • Down Button (▼): Press to move the motor downwards (e.g., close curtains, lower blinds).
  • Stop Button (–): Press to halt the motor's movement at any point.
  • Range: The remote has an effective transmit distance of up to 200 meters in open air and approximately 30 meters when transmitting through two walls.

Maintenance

  • Battery Replacement: When the remote's performance degrades or the display becomes dim, replace the CR2450 button battery as described in the 'Setup' section.
  • Cleaning: Clean the remote controller with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • Storage: Store the remote in a dry place, away from direct sunlight and extreme temperatures.

Troubleshooting

  • Remote not controlling motor:
    • Check if the battery is correctly installed and has sufficient power.
    • Ensure the correct channel is selected on the remote.
    • Verify that the motor is powered on.
    • Repeat the pairing process to re-establish the connection.
    • Ensure the motor is compatible with Dooya RF433 fixed code remotes.
  • Poor signal range:
    • Check for obstructions between the remote and the motor (e.g., thick walls, large metal objects).
    • Replace the battery if it's low.
    • Ensure you are within the specified operating range.

Specifications

FeatureDetail
Model NumberDooya DC1602 15-channel emitter
Item TypeDooya DC1602 15-channel emitter for Dooya RF433 motors
Input Voltage3V
RF Frequency433MHZ
Transmit Distance200M in the open air, 30M through 2 walls
Working Temperature-10-50 degree Celsius
BatteryButton Battery CR2450 (NOT INCLUDED)
ChannelsControl 15 motors
CompatibilityFor Dooya RF433 Fixed Code motor
CertificationCE
OriginMainland China

User Tips

  • Mnemonic for Pairing: The pairing sequence can be remembered as 'P2, P2, Up' (Press P2 twice, then Up once after activating motor pairing mode).
  • Channel Management: Utilize the 15 channels to control individual windows, groups of windows, or different rooms for maximum convenience.
  • Battery Life: To maximize battery life, avoid pressing buttons unnecessarily and store the remote in a cool, dry place.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your Dooya motor or contact your original point of purchase. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.