hiwheel KCQ8.5 INCH

Contents

KCQ 8.5inch 350W 36V 15A Electric Scooter Controller and Instrument Set User Manual

Model: KCQ8.5 INCH

Brand: hiwheel

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your KCQ 8.5inch 350W 36V 15A Electric Scooter Controller and Instrument Set. This set is designed to enhance the performance and functionality of 8.5-inch electric scooters, including compatible models like the Xiaomi M365 and its copies. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Package Contents

Upon opening your package, please verify that all the following components are included:

  • 1x Controller (360W/36V/15A)
  • 1x Accelerator
  • 1x Tail Light
  • 1x Headlight
  • 1x Pro Instrument Display (with APP QR code)
  • 1x Instrument Communication Line
  • 1x Instrument Panel Cover
  • 1x Waterproof Sleeve
  • 1x Brake Lever
Overview of the 360W/36V/15A Controller SET components for 8.5-inch Electric Scooter
Figure 1: Overview of the 360W/36V/15A Controller SET components for 8.5-inch Electric Scooter. Includes controller, accelerator, tail light, headlight, Pro instrument with APP display, instrument communication line, instrument panel cover, APP QR code, waterproof sleeve, and brake lever.

3. Specifications

AttributeValue
Model NumberKCQ8.5 INCH
Brand Namehiwheel
Voltage36V
Current15A
Power350W
TypeOther (Controller)
OriginMainland China
TipsNO-APP (Note: Despite the product title, this controller does not support APP functionality.)
Feature1matherboard
Feature2electric scooter unit
Feature3xbot scooter controller
Feature4controller scooter xwsc007 8
Feature5electric scooter card
Feature6Electric Scooter Controller Board
Feature7Matherboard for Controller
Feature8scooter controller
Feature9brushless motor controller
Feature10electric scooter controller
Feature1136v controller scooter controller 36v
Feature12electric bicycle e-bike scooter
Feature13electronic throttle controller
Feature14brushless dc motor controller
Feature15dc motor speed controller
Close-up view of the 36V 15A electric scooter controller
Figure 2: Close-up view of the 36V 15A electric scooter controller, showing its specifications and warning about water damage.

4. Setup and Installation

This controller set is suitable for 8.5-inch electric scooters, including the Xiaomi M365 and its compatible copies. Professional installation is recommended due to the electrical nature of the components.

4.1. Component Identification

Refer to Figure 1 for an overview of all components included in the set.

4.2. Controller Wiring

Carefully connect the controller to your scooter's electrical system. Refer to Figure 3 for the main wiring connections:

  • XT60 Battery Interface: Connects to the scooter's battery.
  • Motor Phase Line: Three thick wires (typically green, yellow, blue) connect to the motor. Ensure correct phase matching.
  • Communication Line: Multi-pin connector for data exchange.
  • Tail Light Line: Connects to the tail light.
  • Hall Line: Multi-pin connector for motor Hall sensors.
Detailed wiring diagram for the scooter controller
Figure 3: Detailed wiring diagram for the scooter controller. Shows connections for XT60 Battery interface, Motor phase line (three thick wires), Communication line, Tail light line, and Hall line.

4.3. Instrument Panel Wiring

Connect the Pro Instrument Display to the controller and other peripherals as shown in Figure 4:

  • Communication Line: Blue connector for display data.
  • Accelerator Line: White interface for throttle input.
  • Brake Line: Red interface for brake signal.
  • Headlight Line: White interface for headlight control.
Wiring diagram for the Pro instrument display
Figure 4: Wiring diagram for the Pro instrument display. Indicates connections for communication line (blue connector), accelerator line (white interface), brake line (red interface), and headlight line (white interface).
Detail of the taillight component with its two-pin connector
Figure 5: Detail of the taillight component with its two-pin connector.
Image showing the controller set components alongside an 8.5-inch electric scooter, highlighting its suitability and including a Certificate of Conformity.
Figure 6: Image showing the controller set components alongside an 8.5-inch electric scooter, highlighting its suitability and including a Certificate of Conformity.

5. Operation

5.1. Power On/Off

Press and hold the power button on the instrument display to turn the scooter on or off.

5.2. Accelerator and Brake

Use the accelerator lever to control the scooter's speed. Apply the brake lever to slow down or stop. The system may feature regenerative braking.

5.3. Lighting

The headlight and tail light provide illumination and increase visibility for safer riding.

5.4. Display Information

The Pro Instrument Display shows current speed and battery charge level, typically indicated by five segments. Note that it does not display mileage (km) or exact battery voltage.

5.5. Kick-Start Functionality

By default, the scooter operates in kick-start mode. This means you must push off with your foot to get the scooter moving before the accelerator will engage the motor. The motor wheel must be rotating for the throttle to work.

5.6. APP Functionality

Please note that despite the product title, the controller set does NOT support Bluetooth APP connectivity for control or monitoring, as indicated by the 'NO-APP' specification.

6. Maintenance

To ensure the longevity and optimal performance of your controller and instrument set, follow these general maintenance guidelines:

  • Regular Cleaning: Keep the controller, display, and all connections clean and free from dust and debris.
  • Connection Checks: Periodically inspect all wiring connections to ensure they are secure and not loose.
  • Wiring Inspection: Check all cables and wires for any signs of wear, cuts, or damage. Replace damaged wires immediately.
  • Water Protection: The controller has a waterproof sleeve, but avoid exposing the components to excessive moisture or direct water spray to prevent damage.

7. Troubleshooting

If you encounter issues with your controller set, refer to the following common problems and solutions:

7.1. Error Codes

  • Error E02: This error often indicates a problem with the motor phase lines or Hall sensor connections. Check that all motor wires and the Hall line are correctly and securely connected to the controller.
  • Error E04: An E04 error typically points to a general connection issue. Verify all connections to the controller and instrument display are correct and tight.
  • Error E06: This error may relate to communication issues. Ensure the communication lines between the controller and display are properly connected.

7.2. Motor and Throttle Issues

  • Motor Rumbles, Stops, or Brakes Instead of Accelerates: This is usually a sign of incorrect motor phase wiring. Double-check the color combinations of the motor phase lines.
  • Motor Turns in Opposite Direction: Incorrect motor phase line connections can cause the motor to spin backward. Re-verify the phase wire connections.
  • Throttle Not Working / Scooter Not Moving: Ensure you perform a kick-start (push off with your foot) before engaging the throttle, as this is the default operating mode. Also, check all connections, especially the accelerator line.

7.3. Speed Limitations

The controller may have a default speed limit (e.g., 25 km/h). Removing or altering these limits typically requires advanced firmware modifications, which are not officially supported and may void any warranty. Proceed with caution and at your own risk if attempting such modifications.

8. User Tips

  • Verify All Connections: Before first use and after any maintenance, always double-check that all wires and connectors are correctly and securely attached.
  • Understand Kick-Start: Remember that the scooter requires an initial push to activate the throttle. If the throttle isn't responding, ensure the scooter is already in motion.
  • Display Limitations: The instrument display provides essential information like speed and battery charge (in segments). It does not show detailed metrics such as total mileage or precise battery voltage.
  • Wiring Challenges: If connectors do not match perfectly, some users have found success by carefully adapting connections using metal wires through existing holes. Exercise extreme caution and ensure proper insulation if attempting this, as incorrect wiring can cause damage.

9. Warranty and Support

For any warranty claims, technical support, or further assistance, please contact the seller or manufacturer directly. Keep your purchase records handy as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.