1. Introduction
The Vgate Vlinker MC V2.2 ICar Pro is a high-quality automotive scanning tool designed to provide comprehensive diagnostic capabilities for your vehicle. It supports all standard OBD-II protocols and offers connectivity via Bluetooth 3.0, Bluetooth 4.0, or WiFi, making it compatible with a wide range of Android and iOS devices. This manual will guide you through the setup, operation, and troubleshooting of your Vgate Vlinker MC V2.2 ICar Pro.
2. Safety Information
Please read and understand all safety instructions before using this device. Failure to do so may result in damage to the device, vehicle, or personal injury.
- Ensure your vehicle is parked on a level surface with the parking brake engaged before connecting or disconnecting the device.
- Do not attempt to connect or disconnect the device while the vehicle is in motion.
- Keep the device away from water, extreme temperatures, and direct sunlight.
- Do not disassemble or modify the device.
- Always follow the instructions provided by your diagnostic application for safe operation.
3. Package Contents
Verify that all items are present in your package:
- 1 x Vgate vLinker WIFI/BT3.0/BT4.0 Adapter
- 1 x User Manual
4. Specifications
| Feature | Specification |
|---|---|
| Communication Interface | OBD-II |
| Wireless Support | Bluetooth (3.0/4.0), WiFi |
| Software Version | V2.2 |
| Hardware Version | Newest |
| Supported Systems | Android V4.1-4.4 / Windows 7 / XP only (for BT3.0), Android / iOS (for BT4.0/WiFi) |
| Power Supply Voltage | 11.5V-15V |
| Supply Current | <200mA |
| Standby Current | <30mA (TONWON Pro = <3mA) |
| Operating Temperature | -40 ℃ - 85 ℃ |
| Operating Humidity | 5% - 95% RH Non-Dewfall |
| Data Buffer | Up to 2K bytes |
| UART Baud Rate | Increased to 230.4 Kbps |
| OBD Request Bytes | Up to 48 bytes |
| Certifications | CE, RoHS |
4.1 Supported Protocols
The Vgate Vlinker MC+ supports a wide array of protocols, covering almost 99% of OBDII cars on the market:
- ELM Format Protocols: 15 protocols
- STN Format Protocols: 23 protocols
- User-Defined Protocols: Up to 64 protocols
OBDII 5 Standard Protocols:
- SAE J1850 VPW
- SAE J1850 PWM
- ISO 9141-2
- ISO 14230-4 KWP (5 baud init, 10.4 Kbaud)
- ISO 14230-4 KWP (fast init, 10.4 Kbaud)
- ISO 15765-4 CAN (11bit ID, 500 Kbaud)
- ISO 15765-4 CAN (29bit ID, 500 Kbaud)
- ISO 15765-4 CAN (11bit ID, 250 Kbaud)
- ISO 15765-4 CAN (29bit ID, 250 Kbaud)
Additional Protocols:
- SAE J1939 CAN (29bit ID, 250 * Kbaud)
- ISO 11898 (raw CAN)
- for GMLAN Single Wire CAN (for GMW3089)
- for Ford Medium Speed CAN (MS CAN)
4.2 Vehicle Compatibility
The Vgate Vlinker MC+ is compatible with:
- All OBD2 Vehicles (1996 onwards in USA)
- EOBD vehicles (Petrol cars from 2001 and diesel cars from 2003/2004 in Europe)
- Asian cars (2005 onwards)
5. Setup
5.1 OBD-II Port Location
The OBDII DLC (Data Link Connector) is usually located under the instrument panel (dash) on the driver's side. Refer to your vehicle's manual if you cannot locate it.
5.2 Software Download
To use the Vgate Vlinker MC+, you need a compatible diagnostic application. Scan the QR code provided in the manual paper to download the recommended software.
Recommended APP Software for perfect compatibility:
- For Bimmer Code
- For Torque
- For Forscan
- For JScan
- For Auto Doctor
- For OBD Fusion
Note: We only sell adapters. If you need to charge for some functions of the software you choose, this money is paid to the software developer, not to us.
5.3 Connection Guide (Bluetooth 3.0/4.0 for Android)
- Turn on the ignition in the car.
- Plug the Vgate Vlinker MC+ adapter into the OBD Port.
- Ensure Bluetooth is turned on in your phone's settings.
- Open your chosen diagnostic app (e.g., OBD Auto Doctor or Torque Lite).
- Within the app, navigate to "Extras" or "Settings", then "Connectivity".
- Choose "Bluetooth" as the connection type.
- Select "vLinker MC+" from the list of available devices. If prompted for a pairing code, enter "1234".
- If using Torque Lite, go to "Settings" > "OBD2 Adapter Settings" > "Connection Type" and select "Bluetooth". Then, select "Android-Vlink" as the Bluetooth Device.
5.4 Connection Guide (WiFi for Android/iOS)
- Turn on the ignition in the car.
- Plug the Vgate Vlinker MC+ adapter into the OBD Port.
- Turn on WiFi on your device and connect to the network named "vLinker".
- Open your chosen diagnostic app.
- Within the app, navigate to "Extras" or "Settings", then "Connectivity".
- Choose "WiFi" as the connection type.
- The app should automatically detect and connect to the adapter.
5.5 Connection Guide (Bluetooth LE 4.0 for iOS)
- Insert the adapter into the OBD interface of the car. Turn ignition to Key On Engine Off Position.
- Enable your phone Bluetooth. (Just enable Bluetooth button on the iOS device and continue to the OBD app setting.)
- Open your chosen diagnostic app (e.g., Car Scanner). Click "Connection" in the app settings.
- Select "Bluetooth LE (4.0)". Device name select "vLinker MC-iOS".
- Return to the main page and click "CONNECT". This may take a few minutes.
- ELM and ECU are successfully connected.
Important Note for iOS: You cannot set Bluetooth device name in iPhone. This device only requires to configure Bluetooth device name in the OBD app setting. Just enable Bluetooth button on the iOS device and continue to the OBD app setting. Step 2: ONLY iOS supported Bluetooth profiles can show device name. Bluetooth LE 4.0 technology isn't apply for the supported Bluetooth profiles from iOS, so user can not find 'vLinker MC+ Bluetooth' device name. For iOS supported Bluetooth profiles, please refer to support.apple.com/en-us/HT204387.
6. Operating Instructions
Once connected, your Vgate Vlinker MC+ allows you to access various vehicle diagnostic functions through your chosen application.
6.1 Basic Functions
- Read Diagnostic Trouble Codes (DTCs): View current, pending, and permanent trouble codes.
- Clear Trouble Codes: Turn off the Malfunction Indicator Lamp (MIL) or "Check Engine" light.
- View Real-time Data: Monitor various sensor data such as Engine RPM, Vehicle Speed, Coolant Temperature, Fuel System Status, Intake Manifold Pressure, and more.
- Data Logging: Record vehicle data for later analysis.
- Readiness Monitors: Check the status of various emission-related systems to ensure your vehicle is ready for inspection.
6.2 Special Functions
- Automatic Protocol Identification: The device automatically identifies vehicle protocols for quick information reading.
- Automatic Sleep/Start: Features fully automatic standby and start, eliminating the need for a manual switch button. Device sleep power consumption is less than 2 mA.
- BMW Specific Functions: Supports BimmerCode for BMW 1 Series (F20 F21), 2 Series (F22 F23 F87, Active Tourer F45, Gran Tourer F46), 3 Series (F30 F31 F34 F35 F80), 4 Series (F32 F33 F36 F82 F83), 5 Series (F07 F10 F11 F18 F90), 5 Series (G30 G31), 6 Series (F06 F12 F13), 7 Series (F01 F02 F03 F04, G11), X1 (F48), X2 (F39), X3 (F25, G01), X4 (F26), X5 (F15 F85), X6 (F16 F86), i3, i8, and Mini (F54 F55 F56 F57 F60).
7. Troubleshooting
If you encounter issues with your Vgate Vlinker MC+, refer to the following common problems and solutions:
7.1 Connection Issues
- Adapter not detected: Ensure the adapter is firmly plugged into the OBD port and the car ignition is on. Check if the adapter's indicator lights are active.
- Bluetooth pairing failure: For Android, ensure you are pairing within the diagnostic app, not directly through phone settings. For iOS, ensure Bluetooth is enabled on the phone, but the actual connection is made within the app for Bluetooth LE 4.0. The default pairing code is "1234".
- App not connecting to adapter: Verify that the correct connection type (Bluetooth or WiFi) is selected in the app's settings. Try restarting the app and re-establishing the connection.
7.2 Data Reading Issues
- No data or incorrect data: Ensure your vehicle is OBDII compliant (generally 1996+ for USA, 2001+ for European petrol, 2003/2004+ for European diesel). Some older vehicles or specific models might not fully support all OBDII parameters.
- App compatibility: While the Vlinker MC+ supports many apps, some apps might have specific requirements or limitations. Ensure your app is up-to-date.
8. Maintenance
To ensure the longevity and optimal performance of your Vgate Vlinker MC+:
- Keep the device clean and free from dust and moisture.
- Store the device in a cool, dry place when not in use.
- Avoid dropping or subjecting the device to strong impacts.
- Do not use harsh chemicals or abrasive cleaners on the device.
9. User Tips
Based on user experiences, here are some helpful tips:
- Always ensure your car's ignition is on when connecting the device to the OBD port.
- For Android users, remember to connect via Bluetooth or WiFi directly within your chosen diagnostic app, not through your phone's main settings.
- If you have a BMW, the BimmerCode app is highly recommended for accessing specific coding and diagnostic features.
- The device's auto sleep/start feature is convenient, allowing you to leave it plugged in without draining your car battery significantly.
- Many users find the real-time data monitoring and fault code clearing features to be very useful for saving on workshop costs.
10. Warranty and Support
This product typically comes with a 2-year warranty and high-quality after-sales service from the ExcellentOBD Store. For any technical assistance or warranty claims, please contact the seller directly.
For additional information and documents, you may refer to the official user manual PDF if provided by the seller.
PDF User Manual: A user manual in PDF format is available. Please refer to the product page for the direct link or contact the seller for access.
11. Video Guide
Watch this video for a visual demonstration of connecting and using the Vgate iCar Pro with both iPhone and Android devices.