K&F CONCEPT ND2-ND400

Contents

K&F Concept ND2-ND400 Variable ND Filter

Instruction Manual

1. Introduction

The K&F Concept ND2-ND400 Variable Neutral Density Filter is designed to reduce the amount of light entering your camera lens without affecting the color balance. This allows for greater control over exposure settings, enabling the use of slower shutter speeds and wider apertures in bright lighting conditions. It is constructed from high-quality optical glass and features an aviation aluminum alloy frame, offering durability and optical clarity.

K&F Concept ND2-ND400 Variable ND Filter in its packaging with a cleaning cloth.

Figure 1: K&F Concept ND2-ND400 Variable ND Filter and packaging.

2. Setup

2.1 Identifying Your Lens Thread Size

Before attaching the filter, you must determine the correct thread size for your camera lens. This size is typically indicated on the front of your lens barrel or on the inside of your lens cap, usually preceded by a "Ø" (diameter) symbol. The K&F Concept ND2-ND400 filter is available in various sizes: 37mm, 40.5mm, 43mm, 46mm, 49mm, 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, 77mm, and 82mm.

Diagram showing how to check the lens thread size, indicated by a diameter symbol (Ø) on the lens.

Figure 2: Locating the lens thread size on your camera lens.

2.2 Attaching the Filter

  1. Ensure your lens and the filter are clean and free of dust.
  2. Align the filter's threads with the threads on the front of your camera lens.
  3. Gently rotate the filter clockwise until it is securely fastened. Do not overtighten, as this can make removal difficult.

3. Operating the ND Filter

3.1 Adjusting Neutral Density Levels

The K&F Concept ND2-ND400 filter allows for variable light reduction from ND2 (1 stop) to ND400 (9 stops). To adjust the density, simply rotate the outer ring of the filter. You will notice the filter becoming darker or lighter as you turn it. This adjustment enables you to achieve desired effects such as motion blur in bright conditions or maintaining a wide aperture for shallow depth of field.

Visual representation of 9 stops adjustable ND filter, showing a range from clear to very dark, with a waterfall scene demonstrating its effect.

Figure 3: 9 Stops Adjustable ND Filter demonstrating light reduction.

Comparison of ND2, ND4, and ND8 filter effects on a flowing stream, showing increasing motion blur.

Figure 4: ND Filter comparison at different stops (ND2, ND4, ND8).

3.2 Understanding the "X" Spot Phenomenon

When adjusting the variable ND filter to its maximum density (ND400) or a very high degree, an "X" spot or blur may appear in your image. This is a normal optical phenomenon inherent to variable ND filter designs. To mitigate this, it is suggested to gradually lower the density value and/or reduce the camera's aperture until the "X" spot disappears.

Notice explaining the 'X' spot phenomenon at maximum ND settings, showing two filter types and an example image.

Figure 5: Explanation of the "X" spot phenomenon.

3.3 Video Demonstration

Video 1: Demonstration of the K&F Concept 9-stop variable ND filter.

4. Maintenance

4.1 Cleaning the Filter

To maintain optimal image quality, keep your ND filter clean. Use a soft, dust-free microfiber cleaning cloth (often included with the filter) to gently wipe away dust and smudges. For stubborn marks, a small amount of lens cleaning solution can be applied to the cloth, not directly to the filter. Avoid using abrasive materials or harsh chemicals, which can damage the filter's coatings.

Hands wearing gloves gently cleaning a camera lens filter with a white microfiber cloth.

Figure 6: Cleaning the ND filter with a soft cloth.

4.2 Storage

When not in use, store the ND filter in its protective case to prevent scratches and dust accumulation. Keep it in a dry, cool place away from direct sunlight and extreme temperatures.

5. Troubleshooting

5.1 "X" Spot or Blur in Images

As mentioned in Section 3.2, an "X" spot or blur can appear at the maximum or very high ND settings. This is a common characteristic of variable ND filters. To resolve this, reduce the ND setting by rotating the outer ring of the filter and/or adjust your camera's aperture to a smaller opening (higher f-number).

5.2 Vignetting (Dark Corners)

Vignetting, or dark corners in your images, can occur, especially when using the filter with wide-angle lenses (e.g., 17mm to 24mm focal lengths) or at higher ND settings. To minimize vignetting, try reducing the ND setting or using a lens with a longer focal length. Some degree of vignetting may be unavoidable with certain lens and filter combinations at extreme wide angles.

Comparison image showing 'No Vignetting on 16mm Focal Length' for K&F Concept filter versus 'Others' with noticeable vignetting.

Figure 7: Vignetting comparison at 16mm focal length.

6. Specifications

FeatureDescription
TypeAdjustable Neutral Density Filter
Model NumberND2~ND400
Brand NameK&F CONCEPT
MaterialOptical glass + Aviation aluminum alloy
Density RangeND2 (1 stop) to ND400 (9 stops)
Gear (Stops)1/2/3/4/5/6/7/8/9 Stop
Optical Density0.3/0.6/0.9/1.2/1.5/1.8/2.1/2.4/2.7
CoatingYes (Double-sided Multilayer Green Film)
HD (High Definition)Yes
WaterproofNo
Scratch ResistantNo
Frame Thickness7.4mm
Specular Reflectivity0.60%
Available Diameters37mm, 40.5mm, 43mm, 46mm, 49mm, 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, 77mm, 82mm
ApplicationShooting video/large aperture to prevent overexposure, sunrise and sunset photography.
Detailed specification table comparing various ND filter types, including ND2-ND400, showing gear, optical density, coating, HD, waterproof, scratch resistance, frame thickness, specular reflectivity, maximum supported focal length, diameter, and application characteristics.

Figure 8: Comprehensive ND Filter Specifications.

7. User Tips

  • Lens Hood Compatibility: The slim design of this filter generally allows for the installation of a lens hood without interference. However, with some specific lens and hood combinations, you might need to reverse the lens hood for proper fit.
  • Maintaining Sharpness: This filter is designed to minimize impact on image sharpness. If you experience a loss of sharpness, ensure the filter is clean, properly attached, and consider if extreme ND settings are contributing to the effect.
  • Continuous Rotation: The filter's outer ring rotates continuously (360 degrees) without hard stops. This allows for precise and smooth adjustment of the neutral density level.

8. Warranty and Support

For any questions, technical assistance, or warranty claims, please contact K&F Concept customer support. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.