GEYA THC-15A, THC-20A, THC-30A

Contents

GEYA THC Series Digital Timer Switch User Manual

Models: THC-15A, THC-20A, THC-30A

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the GEYA THC Series Weekly Programmable Digital Timer Switch. This device is designed for DIN rail mounting and features an LCD display for easy programming of ON/OFF times over a weekly cycle. It is suitable for controlling various electrical appliances and circuits.

GEYA THC-15A Digital Timer Switch front view
Front view of the GEYA THC-15A Digital Timer Switch, showing the LCD display and control buttons.
Comparison of GEYA THC-15A, THC-20A, THC-30A models
Comparison of THC-15A, THC-20A, and THC-30A models, highlighting different current ratings and contact configurations.

2. Specifications

FeatureSpecification
Brand NameGEYA
Model NumberTHC-15A, THC-20A, THC-30A
Product NameWeekly Timer Switch
TypeMini Digital Timer
TheoryDigital
UseTimer Switch
Rated VoltageAC220V-240V
Rated Frequency50/60Hz
Rated Current16A (THC-15A), 20A (THC-20A), 30A (THC-30A)
DisplayLCD
Switching Contact1 Changeover Switch (THC-15A, THC-20A), 1 NO (THC-30A)
MountedDin Rail
Battery IncludedYes
CertificationCE
OriginMainland China
Back view of GEYA THC-15A timer showing specifications
Back view of the timer, displaying model, voltage, frequency, and current ratings.

3. Safety Information

Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Installation should only be performed by a qualified electrician.
  • Ensure power is disconnected at the main circuit breaker before any installation or wiring work.
  • Do not exceed the specified current and voltage ratings of the device.
  • This device is designed for indoor use only.
  • Keep away from water and high humidity environments.
  • Do not attempt to open or repair the device yourself. Refer to qualified service personnel.

4. Package Contents

Upon opening the package, verify that you have received the following items:

  • GEYA THC Series Digital Timer Switch (1 unit)
  • User Manual (this document)

5. Setup and Installation

5.1 Mounting

The GEYA THC Series timer switch is designed for DIN rail mounting. Simply clip the device onto a standard 35mm DIN rail in your electrical panel.

Side view of GEYA THC timer showing DIN rail clip
Side view illustrating the DIN rail mounting mechanism.

5.2 Wiring

WARNING: Ensure power is OFF before wiring. Incorrect wiring can cause damage to the device or electrical shock.

Refer to the wiring diagram below for proper connection. The timer requires a 220V-240V AC power supply. Connect the Line (L) and Neutral (N) wires to terminals 1 and 2 respectively. The load should be connected to terminals 3, 4, and 5 depending on the model and desired contact configuration.

Product Wiring Diagram for GEYA THC Timer Switch
General wiring diagram for the GEYA THC timer switch. Connect Neutral (N) to terminal 1, Line (L) to terminal 2. The load is connected to terminals 3, 4, and 5. Note: This is a special case, for reference only. Consult a qualified electrician for specific installations.
  • Terminals 1 & 2: Power input (N and L for AC220V-240V).
  • Terminals 3, 4, 5: Load connections.
    • For THC-15A and THC-20A (1 Changeover Switch): Typically, 3 is Common, 4 is Normally Open (NO), 5 is Normally Closed (NC).
    • For THC-30A (1 NO): Typically, 3 is Common, 4 is Normally Open (NO).

After wiring, restore power and proceed to the operating instructions.

6. Operating Instructions

The GEYA THC timer switch features an LCD display and several buttons for programming. The buttons are typically labeled P (Program), D+ (Day), H+ (Hour), M+ (Minute), Reset, and Manual.

Instructions for setting time and programming ON/OFF cycles
Visual guide for time adjustment and setting ON/OFF programs.

6.1 Initial Time Adjustment

  1. Press the 'P' button to enter the timing setting mode.
  2. Use 'H+' to adjust the hour.
  3. Use 'M+' to adjust the minute.
  4. Use 'D+' to adjust the day of the week.
  5. Once the current time and day are set, press 'P' again to exit or wait for the display to return to normal.

6.2 Setting ON/OFF Programs

The timer allows for multiple ON/OFF programs. Follow these steps for each program:

  1. Press the 'P' button to enter the timing setting. The display will show "1 ON" (indicating the first ON time of the first program).
  2. Press 'H+' and 'M+' to set the desired ON time.
  3. Press 'D+' to select the day(s) of the week for this ON program. You can choose individual days, weekdays, weekends, or all days.
  4. Press 'P' again. The display will show "1 OFF" (indicating the first OFF time of the first program).
  5. Press 'H+' and 'M+' to set the desired OFF time.
  6. Press 'D+' to select the day(s) of the week for this OFF program.
  7. Repeat steps 1-6 for additional ON/OFF programs (e.g., "2 ON", "2 OFF", etc.).
  8. After setting all desired programs, press the 'P' button repeatedly until the display returns to the current time or press the 'Reset' button to exit programming mode.

6.3 Running the Program

After setting your programs, ensure the timer is in "AUTO" mode for the programs to execute automatically. Press the "MANUAL" button to cycle through modes: ON, AUTO, OFF. Select "AUTO" for automatic operation.

6.4 Manual Override

The "MANUAL" button also allows for temporary manual override:

  • Pressing "MANUAL" once may switch the output from AUTO to ON or OFF, depending on the current state.
  • Pressing it again will cycle through the modes (ON, AUTO, OFF).
  • To return to automatic operation, ensure the display shows "AUTO".

6.5 Reset Function

To clear all programs and reset the timer to its default state, press the 'RESET' button (usually a small recessed button that requires a pointed object like a pen to press).

7. Maintenance

  • Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery: The device includes an internal battery to retain settings during power outages. This battery is typically long-lasting and not user-replaceable. If the display goes blank or settings are lost frequently, the battery may need professional servicing.
  • Inspection: Periodically check the wiring connections to ensure they are secure and free from corrosion.

8. Troubleshooting

ProblemPossible CauseSolution
Device does not power on / LCD is blank.No power supply; incorrect wiring; internal battery depleted (if no mains power).
  • Check mains power supply to terminals 1 and 2.
  • Verify wiring connections are correct and secure.
  • If the device has been stored for a long time without power, connect it to mains power for several hours to charge the internal battery.
Programs are not executing / Load does not switch ON/OFF.Timer is not in "AUTO" mode; incorrect program settings; faulty wiring to load; defective relay.
  • Press the "MANUAL" button until "AUTO" is displayed on the screen.
  • Review your ON/OFF program settings carefully for accuracy (time, day).
  • Check wiring to the load (terminals 3, 4, 5). Ensure the load is connected to the correct contact (NO/NC).
  • If the relay makes no audible click when switching, it might be defective.
Settings are lost after power outage.Internal battery is depleted or faulty.
  • The internal battery charges when connected to mains power. Keep the device powered for at least 24 hours to fully charge the battery.
  • If the problem persists, the internal battery may need professional replacement.
Relay does not activate (no click, no power to load).Defective relay; incorrect wiring; load current exceeds rating.
  • Verify the load current does not exceed the timer's rated current (15A, 20A, or 30A).
  • Double-check all wiring connections, especially to the load.
  • If all checks fail, the relay might be faulty. Professional inspection or replacement may be required.

9. User Tips

  • Ease of Use: Many users find this timer easy to program once familiar with the button functions. Take your time to understand each button's role.
  • Reliability: The product is generally considered reliable and durable, with some users reporting perfect operation for over a year.
  • Programming Flexibility: The weekly programmable feature allows for versatile scheduling of various devices.
  • Power-Up: If the device has been unpowered for a long time, allow it to be connected to mains power for a few hours to ensure the internal battery is charged and retains settings.

10. Frequently Asked Questions (FAQ)

Q: Which brand manufactures this timer?
A: This timer is manufactured by the brand GEYA.
Q: Can the digital timer be programmed to turn on for a few minutes, then off for a few minutes, repeating this continuously?
A: Yes, the timer allows for multiple ON/OFF programs. You can set specific ON and OFF times for each program, and these can be repeated daily or on selected days of the week. For very short, continuous cycling (e.g., every few minutes), you would need to program multiple ON/OFF pairs. Consult the "Setting ON/OFF Programs" section for details.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.