EJEAS BT-S Series USB Charge Cable

Contents

Instruction Manual

EJEAS BT-S Series Motorcycle Bluetooth Intercom USB Charge Cable

1. Introduction

This manual provides instructions for the EJEAS USB Charge Cable, designed for use with EJEAS BT-S1, BT-S2, and BT-S3 series motorcycle Bluetooth intercom helmet headsets. It covers identification of cable types, proper connection, charging procedures, maintenance, and troubleshooting.

Important Note: This manual is specifically for the USB charge cable. The Bluetooth intercom helmet headset itself is not included with this product.

USB Charge Cable with three EJEAS Bluetooth intercom units

Figure 1: USB Charge Cable and compatible EJEAS Bluetooth intercom units (intercoms not included).

2. Product Overview and Compatibility

The EJEAS USB Charge Cable is available in two main types to ensure compatibility with different versions of the BT-S series intercoms:

  • Old Style: Mini 8 Pin USB
  • New Style: Type-C USB

It is crucial to identify the correct port type on your specific BT-S1, BT-S2, or BT-S3 intercom unit before selecting the appropriate charge cable.

Comparison of Old Mini 8 Pin USB and New Type-C USB cables and their corresponding intercom ports

Figure 2: Visual guide for distinguishing between Old Mini 8 Pin USB and New Type-C USB ports on intercom units.

The cable is designed exclusively for EJEAS BT-S series intercoms and is not compatible with other brands or models of walkie-talkies or mobile phones.

3. Setup and Connection

  1. Identify Intercom Port: Examine the charging port on your EJEAS BT-S1, BT-S2, or BT-S3 intercom unit. Refer to Figure 2 to determine if it requires a Mini 8 Pin USB or a Type-C USB cable.
  2. Select Correct Cable: Ensure you have the matching USB charge cable (Mini 8 Pin or Type-C) for your intercom.
  3. Connect to Intercom: Gently insert the smaller end of the USB charge cable into the corresponding charging port on your intercom unit. Do not force the connector, as this may cause damage.
  4. Connect to Power Source: Insert the standard USB-A end of the cable into a compatible USB power adapter (e.g., wall charger, computer USB port, power bank).

Once connected, the intercom unit should indicate that it is charging (e.g., via an LED indicator, if available on your model).

4. Operating Instructions (Charging)

The USB charge cable facilitates the charging of your EJEAS BT-S series intercom unit. Follow these steps for optimal charging:

  1. Ensure the intercom unit is powered off before charging for faster and more efficient charging.
  2. Connect the cable as described in Section 3.
  3. Allow the intercom to charge fully. Charging times may vary depending on the battery level and the power source.
  4. Once fully charged, disconnect the cable from the power source first, then from the intercom unit.

Avoid leaving the intercom connected to the charger for extended periods after it is fully charged to prolong battery life.

5. Maintenance and Care

  • Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cleaning: If necessary, gently wipe the cable with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Handling: Do not bend, twist, or pull the cable excessively, especially near the connectors, as this can damage internal wires.
  • Inspection: Periodically inspect the cable for any signs of wear, fraying, or damage. Discontinue use if damage is observed.

6. Troubleshooting

Cable Not Charging

  • Check Compatibility: Verify that you are using the correct cable type (Mini 8 Pin or Type-C) for your intercom model. Refer to Figure 2.
  • Secure Connection: Ensure both ends of the USB cable are securely plugged into the intercom and the power adapter.
  • Test Power Source: Try using a different USB power adapter or a different USB port on your computer to rule out issues with the power source.
  • Inspect Cable: Check the cable for any visible damage, such as cuts, kinks, or bent pins in the connectors. A damaged cable should be replaced.
  • Intercom Issue: If the cable and power source are confirmed to be working, the issue might be with the intercom unit's charging port or battery. Consult the intercom's manual or EJEAS support.

7. Specifications

FeatureDescription
Product TypeUSB Charge Cable
CompatibilityEJEAS BT-S1, BT-S2, BT-S3 Motorcycle Bluetooth Intercom Headsets
Connector Type (Intercom End)Mini 8 Pin USB (Old Style) or Type-C USB (New Style)
Connector Type (Power Source End)Standard USB-A
FunctionCharging only (not for data transfer)

8. User Tips

  • Verify Connector: Always double-check the connector type on your intercom (Mini 8 Pin or Type-C) before purchasing a replacement cable to ensure compatibility.
  • Cable Only: Remember that this product is solely the charge cable; the intercom unit itself is sold separately.

9. Warranty and Support

For warranty information or technical support regarding your EJEAS USB Charge Cable, please refer to the seller's policies or contact EJEAS customer service directly. Keep your purchase receipt as proof of purchase.

A user manual for the intercom unit (which may contain general information about charging) is available as a PDF: View Intercom User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.