DIANQI THC15A

Contents

Electronic Weekly 7 Days Programmable Digital Timer Switch (THC15A/AHC15A)

User Manual

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of the DIANQI THC15A/AHC15A Electronic Weekly 7 Days Programmable Digital Timer Switch. This device is designed for automatic control of electrical appliances based on a pre-set weekly schedule, offering convenience and energy efficiency.

2. Safety Information

  • Ensure the power supply is disconnected before installation or maintenance to prevent electric shock.
  • Installation should be performed by a qualified electrician or knowledgeable individual.
  • Do not exceed the specified voltage and current ratings.
  • Keep the device away from moisture, dust, and extreme temperatures.
  • Verify all connections are secure before applying power.

3. Product Overview

The THC15A/AHC15A is a digital time switch featuring daily programs and the ability to repeat schedules. It supports up to 20 ON/OFF settings and includes a manual override function. A built-in lithium battery provides power reserve for settings, and it offers automatic time error correction.

Front view of two timer switch types (Type 1 and Type 2), showing the display and control buttons.

Figure 1: THC15A/AHC15A Digital Timer Switch (Type 1 and Type 2)

Front view of two timer switches, labeled '1NO1NC' and '1NO', indicating different contact configurations.

Figure 2: Timer Switch Contact Types (1NO1NC and 1NO)

Video 1: Product demonstration showing the timer switch from various angles and highlighting its features.

4. Specifications

FeatureSpecification
Model NumberTHC15A / AHC15A
Voltage RatingAC 220V 50/60Hz (Other options: 12V, 24V, 36V, 48V, 110V)
Voltage LimitAC 180V~250V
Hysteresis≤1 sec/day (at 25°C)
ON/OFF Operation20 ON & 20 OFF settings
Power Consumption2VA (max)
DisplayLCD
Service Life (Mechanical)107 operations
Service Life (Electrical)105 operations
Minimum Interval1 minute
WeightApprox. 100g
Countdown Function1 sec - 99 min 56 sec
Pulse Function1 sec - 59 min 59 sec
Load Capacity (Contact Type)16A/250V AC
Load Capacity (Straight Type)10A/250V AC
Switching Contact1 changeover switch
Power Reserve3 years (Lithium battery)
Ambient Temperature-10°C to +40°C
Ambient Humidity35% to 85% RH
CertificationCE
Available Set Plans20 plans
Dimensions diagram for the 1NO1NC type timer switch, showing height (87mm), width (36.2mm), and depth (48mm, 45.4mm, 35mm).

Figure 3: Overall Dimensions of the Timer Switch

5. Installation

5.1 DIN Rail Mounting

The timer switch is designed for DIN rail installation. Simply clip it onto a standard DIN rail in your electrical panel. Ensure the clip is securely fastened.

Side view of the timer switch, highlighting the yellow DIN rail mounting clip.

Figure 4: DIN Rail Mounting Clip

5.2 Wiring Diagrams

Refer to the following diagrams for correct wiring based on your timer switch type (Contact Type or Straight Type). Always ensure power is off before making any connections.

Wiring diagram for the 'Straight Type' (1NO) timer switch, showing connections for Neutral (N), Live (L), and Load.

Figure 5: Straight Type (1NO) Connection Diagram

Wiring diagram for the 'Contact Type' (1NO1NC) timer switch, showing connections for Neutral (N), Live (L), and the load connected to the normally open (NO) and common (COM) contacts.

Figure 6: Contact Type (1NO1NC) Connection Diagram

6. Operating Instructions

6.1 Initial Setup

  1. Press the RESET key to clear all previous settings and start the machine.
  2. To set the current time: After pressing RESET, press the P button. Then, use D+ (Day), H+ (Hour), and M+ (Minute) buttons to adjust the display to the current time.

6.2 Programming ON/OFF Schedules

The timer allows for up to 20 ON and 20 OFF programs. Follow these steps to enter and set your desired schedules:

StepKeyAction / Programming
1PSet 1 ON time (display shows '1 ON')
2H+/M+Set hours and minutes for ON time
3D+Select specific days or all days for this ON time
4PSet 1 OFF time (display shows '1 OFF')
5H+/M+Set hours and minutes for OFF time
6D+If you want the same day(s) as ON time, you do not need to press this key. Otherwise, select specific days.
7Repeat steps 2-6Set programs 2 through 20 (ON/OFF times)
8CLOCKExit programming mode and return to current time display

Important Notes:

  • Time settings must be entered in chronological order. Overlapping or cross-setting times is not possible.
  • The system will automatically exit programming mode if there is no operation within 10 seconds, and unsaved data will be lost.
  • Functions for setting Day, Hour, and Minute (D+, H+, M+) cannot be used simultaneously during programming.
Close-up view of the timer switch display and control buttons (P, D+, H+, M+, RESET, MANUAL).

Figure 7: Timer Switch Display and Control Buttons

7. Maintenance

  • Regularly check wiring connections for tightness and signs of wear.
  • Keep the device clean and free from dust using a dry, soft cloth.
  • If the device will not be used for an extended period, press the H+ and D+ keys simultaneously for 2 seconds to turn off the display and conserve battery life.

8. Troubleshooting

  • Display is blank or unresponsive: Ensure the device is receiving power. If it has been stored for a long time, the internal battery might be depleted; allow it to charge for a few minutes after connecting to power. Press the RESET button.
  • Programs not executing: Verify that the current time is set correctly. Check that programs are entered in chronological order and do not overlap. Ensure the timer is in automatic mode (if applicable).
  • Device unexpectedly quits programming: The system automatically exits programming if no button is pressed for 10 seconds. Ensure you complete each step within this timeframe.
  • Inaccurate timing: The device has an auto time error correction of ±60 seconds per week. If significant deviation occurs, reset and reprogram.

9. User Tips

  • For optimal performance, ensure all electrical connections are clean and tight. One user reported that cleaning the connector between the internal battery and the electronic board resolved issues with smooth operation.
  • While installation can be straightforward, consulting online resources or a professional for complex wiring setups can be beneficial.
  • Take advantage of the 20 ON/OFF settings to create detailed and efficient schedules for various applications.

10. Warranty and Support

For specific warranty information, please refer to the product packaging or contact your retailer. For additional support or inquiries, please reach out to the manufacturer's customer service.

A detailed user manual in PDF format is available for download. Please refer to the product page or manufacturer's website for the link.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.