LILYGO LoRa32 V2.1_1.6

Contents

LILYGO TTGO LoRa32 V2.1_1.6 Wireless Module User Manual

Model: LoRa32 V2.1_1.6 | Brand: LILYGO

1. Introduction

The LILYGO TTGO LoRa32 V2.1_1.6 is a versatile wireless module integrating an ESP32 microcontroller, LoRa transceiver, and a 0.96-inch OLED display. This version enhances previous designs by incorporating an SMA antenna for improved signal transmission and a modified power switch interaction mode for better performance. It supports various LoRa frequency bands, including 433MHz, 868MHz, 915MHz, and 923MHz, making it suitable for a wide range of IoT and communication projects.

Front view of the LILYGO LoRa32 module with antenna and OLED display showing 'LilyGo LoRa'.
Figure 1: Front view of the LILYGO LoRa32 V2.1_1.6 module with attached antenna and OLED display.
Front and back view of the LILYGO LoRa32 V2.1_1.6 module, highlighting components and connectors.
Figure 2: Front and back view of the LILYGO LoRa32 V2.1_1.6 module.

2. Specifications

2.1. General Specifications

AttributeValue
Dimensions (WxHxD)60*30*20mm
Weight20g
PackageYes
Compatible Audio & Video Equipment StyleAmplifier
Diagram showing the dimensions of the LILYGO LoRa32 module (64.47mm length, 27.13mm width) and its antenna (49.80mm length, 7.77mm width).
Figure 3: Dimensions of the LoRa32 module and antenna.

2.2. LoRa32 Module Specifications

Table detailing LoRa32 Specifications including MCU: ESP32, Flash: 4MB, PSRAM: 8MB, Wireless Connectivity: Wi-Fi 802.11, Bluetooth V4.2 + Bluetooth LE, Programming Platform: Arduino-ide, Micropython, Onboard Functions: TF Card Slot, USB or 3.7V Lipo Battery Power Supply, Battery Switch, CH9102F, Onboard Button: Reset + Boot.
Figure 4: LoRa32 Module Specifications.

2.3. Screen Specifications

Table detailing Screen Specifications including Type: OLED, Resolution: 128 x 64, Drive: SSD1306, Size: 0.96-inch Diagonal, Interface: I2C, I2C Interface: SDA--IO21, SCL--IO22, Text Color: White, Background Color: Blue.
Figure 5: Screen Specifications.

2.4. Low Power LoRa Transceiver

Table detailing Low Power LoRa Transceiver specifications including LoRa Module: SX1276 and SX1278, Frequency Bands: 868/915/923MHz (SX1276) and 144-148MHz/433MHz (SX1278), High-efficiency PA: +14dBm for both, Low RX Current: 9.9mA for both.
Figure 6: Low Power LoRa Transceiver Specifications.

3. Package Contents

The following items are included in your LILYGO TTGO LoRa32 V2.1_1.6 package:

  • 1 x LoRa32 Module (V2.1_1.6 version, specific frequency band)
  • 1 x LoRa Antenna (SMA type)
  • 2 x Pin Headers
  • 1 x Power Cable (Jst 2pin 1.25mm)

Note: Battery and SD card are NOT included in the shipping list.

Image showing the contents of the LILYGO LoRa32 package: the module, an antenna, two pin headers, and a power cable.
Figure 7: Package Contents.

4. Setup Instructions

4.1. Hardware Connection

  1. Attach the LoRa Antenna: Carefully screw the provided SMA antenna onto the SMA connector on the LoRa32 module. Ensure it is finger-tight to avoid damage.
  2. Connect Power: The module can be powered via the Micro-USB port or a 3.7V LiPo battery connected to the JST 2-pin connector. Use the provided power cable for battery connection if applicable.
  3. Install Pin Headers: Solder the included pin headers to the module's pin rows if you intend to use it on a breadboard or with jumper wires.
  4. SD Card (Optional): Insert a formatted SD card into the TF card slot if your application requires data storage.

4.2. Software Setup and Firmware Flashing

The LILYGO LoRa32 V2.1_1.6 is a development board that requires firmware to function. You can program it using platforms like Arduino-IDE or MicroPython. For detailed instructions and sample code, refer to the official GitHub repositories:

Important Note for TCXO Version and Meshtastic Firmware:

The Meshtastic firmware may not be fully adapted to the TCXO version of this board. If you are using a TCXO version and encounter issues, you may need to add specific code snippets to the source code to enable the temperature-compensated crystal oscillator. An example snippet is provided below:

#ifdef RADIO_TXCO_ENABLE
/*
 * In the T3 V1.6.1 TCXO version, Radio DIO1 is connected to Radio's
 * internal temperature-compensated crystal oscillator enable
 */
pinMode(RADIO_TXCO_ENABLE, OUTPUT);
digitalWrite(RADIO_TXCO_ENABLE, HIGH);
#endif
Code snippet showing how to enable RADIO_TXCO in firmware for the T3 V1.6.1 TCXO version.
Figure 8: Code snippet for RADIO_TXCO_ENABLE.

You can find more information or ask for assistance in the Meshtastic GitHub issues or community forum:

5. Operating Instructions

5.1. Powering On/Off

Use the onboard battery switch to turn the module on or off when powered by a LiPo battery. If using USB power, the module will power on automatically when connected.

5.2. OLED Display

The 0.96-inch OLED display provides real-time information and status updates, depending on the loaded firmware. This can include network status, sensor readings, or other application-specific data.

5.3. LoRa Communication

The integrated LoRa module enables long-range, low-power wireless communication. The specific operation will depend on the firmware you flash. Common applications include:

  • Data Transmission: Sending small packets of data over long distances.
  • Mesh Networking: Creating decentralized communication networks (e.g., Meshtastic).
  • Sensor Monitoring: Collecting data from remote sensors.

5.4. Wi-Fi and Bluetooth

Leverage the ESP32's built-in Wi-Fi and Bluetooth capabilities for local network connectivity, data offloading, or integration with other devices. The programming platform (Arduino-IDE, MicroPython) provides libraries to utilize these features.

5.5. SD Card Usage

The TF card slot allows for local data logging, firmware storage, or configuration files. Ensure your SD card is properly formatted and compatible with the ESP32.

5.6. Pinout Diagram

Refer to the pinout diagram for detailed information on GPIOs, power pins, and peripheral connections. This is crucial for custom hardware integrations and programming.

Detailed pinout diagram for the LILYGO T3_V1.6.1 module, showing GPIO assignments for ADC, Touch, HSPI, LED, DAC, OLED (SDA, SCL), TF Card (CS, MOSI, SCK, MISO), and LoRa (MOSI, SCLK, CS, DIO, RST, MISO).
Figure 9: Product Pin Diagram (T3_V1.6.1).

6. Maintenance

  • Handle with Care: The module contains sensitive electronic components. Avoid dropping or subjecting it to excessive force.
  • Keep Dry: Protect the module from moisture and liquids to prevent short circuits and corrosion.
  • Clean Gently: If cleaning is necessary, use a dry, soft cloth. Avoid using harsh chemicals or abrasive materials.
  • Proper Storage: Store the module in a cool, dry place away from direct sunlight and extreme temperatures.
  • Antenna Care: Ensure the LoRa antenna is securely attached during operation and disconnected when storing or transporting to prevent damage to the connector.

7. Troubleshooting

  • Module Not Powering On:
    • Check USB cable connection and power source.
    • If using a battery, ensure it is charged and the battery switch is in the 'ON' position.
  • Firmware Flashing Issues:
    • Ensure correct drivers are installed for the USB-to-serial chip (e.g., CP2104 or CH9102F).
    • Verify the correct board and port are selected in your IDE.
    • Try holding the 'Boot' button while connecting USB or initiating flash, then releasing.
  • No LoRa Communication/Poor Range:
    • Ensure the LoRa antenna is securely attached.
    • Verify the correct frequency band is configured in your firmware for your region.
    • Check for obstructions or interference in the environment.
    • For TCXO versions, ensure the `RADIO_TXCO_ENABLE` code is correctly implemented if using custom firmware.
  • OLED Display Not Working:
    • Check power supply.
    • Verify I2C connections (SDA to IO21, SCL to IO22) if manually wired.
    • Ensure display initialization code is correct in your firmware.
  • Battery Issues:
    • Warning: Some users have reported potential issues with older T3_V1.6 boards regarding battery charging/management. Always use caution when connecting batteries and monitor for unusual heat. It is recommended to research known issues for your specific board revision.
    • Ensure the battery is a 3.7V LiPo.

8. User Tips

  • Firmware Flashing: While powerful, flashing firmware like Meshtastic can be tricky for beginners. Always follow detailed guides from the respective project's GitHub or community forums.
  • Antenna Quality Matters: For optimal LoRa range, consider investing in a higher-quality external antenna if the included one doesn't meet your needs. An outdoor mounted antenna can significantly improve performance.
  • Diverse Applications: This module is highly versatile. Users have successfully employed it for radiosonde tracking, Open MQTT Gateway setups (e.g., for 433MHz smart home devices like Bresser 7in1 weather stations), and as Meshcom protocol gateways.
  • Decentralized Networks: The LoRa capabilities allow for creating decentralized communication networks, offering communication possibilities even without internet or traditional infrastructure.
  • Power Considerations: The device is powered by Micro-USB. For portable or remote use, consider a foldable solar panel with USB output and a power bank.
  • Meshtastic Configuration: When setting up Meshtastic, some users recommend selecting the 'KZ' region to avoid power limitations.
  • Amateur Radio License: If using the 433MHz version for amateur radio applications like LoRa APRS, ensure you comply with local licensing requirements.

9. Support

For technical support, questions, or issues not covered in this manual, please refer to the official LILYGO GitHub repositories linked in the Setup section or contact the seller directly. Provide detailed information about your issue, including the specific model, firmware used, and steps to reproduce the problem, to receive the most effective assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.