1. Introduction
The Launch Creader CRP123 V2.0 is a powerful, full-featured automotive scan tool designed for technicians to troubleshoot four major vehicle systems: Engine, Transmission, Anti-lock Braking System (ABS), and Supplemental Restraint System (SRS). It supports complete 10 modes of OBDII functionality and includes essential reset services like Oil Lamp Reset, Steering Angle Sensor (SAS) Reset, and Electronic Throttle Position (ETC) Reset. This device is compatible with most major vehicle types, including cars, light trucks, minivans, and SUVs manufactured after 1996.
Video: Overview of the Launch Creader CRP123 V2.0 features and capabilities.
2. Components & Controls
Familiarize yourself with the main components and controls of your CRP123 V2.0 diagnostic tool:

Image: Front view of the CRP123 V2.0 showing the diagnostic menu.
- DB15 Connector: Connects the diagnostic cable.
- Selection Button: Used for navigation.
- OK Button: Confirms an action or operation.
- ESC Button: Returns to the previous screen.
- USB Port: Connects the included USB cable for updates and data transfer.
- Memory Card Slot: Insert the memory card for software updates.
- LCD Screen: 3.5-inch color display for viewing information.
- DTC Lookup Button: Retrieves Diagnostic Trouble Codes (DTCs) from the database.
3. Setup & Initial Use
3.1. Connecting to the Vehicle
- Ensure the vehicle ignition is turned OFF and the vehicle battery voltage is between 9-18V.
- Locate the vehicle's Data Link Connector (DLC) socket. This is typically a standard 16-pin connector, usually found within 12 inches from the center of the steering wheel, under or around the driver's side.
- Connect one end of the diagnostic cable into the vehicle's DLC socket.
- Plug the other end of the diagnostic cable into the DB15 connector of the tool and tighten the captive screws.
- Turn the ignition ON with the engine OFF. The tool is now ready for use.

Image: Common locations for the OBD-II DLC connector.
3.2. Initial Power-Up
Once connected, the tool will power on automatically. Follow the on-screen prompts to select your preferred language and other initial settings.
4. Operating Instructions
4.1. System Diagnosis
The CRP123 V2.0 is capable of diagnosing four main systems:
- Engine System: Reads and erases engine DTC codes, turns off the Malfunction Indicator Lamp (MIL).
- Anti-lock Braking System (ABS): Reads and erases ABS DTC codes, turns off the MIL.
- Supplemental Restraint System (SRS) / Airbag: Reads and erases SRS DTC codes, turns off the MIL.
- Transmission System: Reads and erases transmission DTC codes, turns off the MIL.

Image: Four Systems Diagnosis capabilities.
4.2. OBDII/EOBD Functions
The tool supports all 10 modes of OBDII/EOBD test functions:
- Read Codes: Displays the Diagnostic Trouble Codes (DTCs) stored in the vehicle's computer.
- Erase Codes: Clears DTCs from the vehicle's computer and turns off the MIL.
- I/M Readiness: Checks the readiness of the emission monitoring systems.
- Data Stream: Displays live data parameters from the vehicle's sensors. This can be viewed in values and waveforms, and supports graphing up to four PIDs at one time.
- Freeze Frame: Shows a snapshot of operating conditions at the time an emission-related fault occurred.
- O2 Sensor Test: Retrieves O2 sensor monitor test results.
- On-Board Monitoring Test: Retrieves results for emission-related diagnostic monitoring tests of specific components/systems.
- EVAP System Test: Initiates a leak test for the vehicle's Evaporative Emission System.
- Vehicle Information: Displays the vehicle identification number (VIN), calibration ID (CALID), and calibration verification number (CVN).
- DTC Code Lookup: Provides definitions for generic and manufacturer-specific DTCs.

Image: Full OBD II Functions available on the CRP123 V2.0.
4.3. Reset Services
The CRP123 V2.0 includes three commonly used reset services:
- Oil Lamp Reset: Resets the oil service light after an oil change.
- SAS Steering Angle Sensor Reset: Calibrates the steering angle sensor after replacement or repair.
- Electronic Throttle Position (ETC) Reset: Relearns the throttle body position.

Image: Added 3 Reset Service functions.
5. Maintenance & Updates
5.1. Recording and Printing Data
The CRP123 V2.0 allows you to record PIDs (Parameter IDs) for later use, which can help diagnose intermittent driving performance problems that are difficult to determine by other methods. You can also print the recorded data or diagnostic reports after connecting the tool to a PC.

Image: Connecting the diagnostic tool to a PC for printing data reports.
5.2. Software Updates
The CRP123 V2.0 supports lifetime free software updates via the internet. Keeping your tool updated ensures compatibility with the latest vehicle models and diagnostic protocols.
- Go to the Launch official website (www.dbscar.com) to download and install the corresponding update tool on your computer.
- Ensure your computer meets the operating system requirements: Windows XP, Windows 7, Windows 8, Windows 10, or above.
- There are two methods to update your tool:
- Via Memory Card:
- Launch the update tool on your PC.
- Type in the Product Serial Number (found on the back of the tool).
- Click [Device Upgrade] and enter the required information (e.g., email, register code) then click [Submit].
- Install the TF card from the tool into the supplied memory card adapter and insert it into your computer's USB port.
- Reopen the update tool, select the updates you wish to perform or click "Select All", then click [Download].
- Once complete, reinsert the memory card into the tool. A dialog box will prompt you to upgrade; select [OK].
- Via USB Cable:
- Connect one end of the USB cable to your PC and the other end to the tool.
- If a newer version is found, press [OK] to configure the tool as a USB device. The Serial Number and Register Code will be displayed.
- Launch the update tool on your PC.
- Type in the Product Serial Number and click [Device Upgrade]. Enter the required information and click [Submit].
- Select the updates you wish to perform or click "Select All", then click [Download].
- Once complete, restart your tool. It will prompt you to upgrade; click [OK] to start updating.
- The update process is complete once the tool restarts and is ready for use.
6. Troubleshooting
- Tool does not power on: Check the vehicle's ignition status and battery voltage (9-18V). Ensure the diagnostic cable is securely connected to both the vehicle's DLC and the tool.
- Communication error: Verify the diagnostic cable connections. Ensure the vehicle's ignition is on (engine off). Check if the vehicle is OBDII compliant.
- Software update issues: Ensure a stable internet connection. Double-check the product serial number and registration code. Try using a different USB port or memory card.
- Screen is frozen: Try restarting the device by holding the power button. If the issue persists, perform a software update.
7. Specifications
| Feature | Specification |
|---|---|
| Display Size | 3.5-inch TFT LCD |
| Display Resolution | 480*320 |
| Communication Interface | OBD-II |
| Software Update | Yes (Lifetime Free Update via Internet) |
| Item Weight | 1kg |
| Item Dimensions (L x W x H) | 10cm x 15cm x 12cm |
| External Testing Certification | CE |
| Working Voltage | 9-18V |
| Working Current | <600mA |
| Working Temperature | 0 to 50°C (32 to 122°F) |
| Storage Temperature | -20 to 70°C (-4 to 158°F) |
| Working Humidity | 10%-90% |
| Storage Humidity | <80% |
| Supported Languages | English, French, Spanish, German, Russian, Japanese, Portuguese |
| Supported Systems | Engine, Transmission, AirBag (SRS), ABS |
| Supported Functions | Reads DTCs, Erases DTCs, Datastream, Oil Reset, SAS Reset, ETC Reset |
| Material | Plastic |
| Origin | Mainland China |
8. Warranty & Support
The Launch Creader CRP123 V2.0 comes with a 5-year warranty, ensuring long-term reliability and support for your diagnostic needs. For additional guidance and detailed instructions, please refer to the full User Manual included in the product package. You can also download the PDF version of the item guides and documents from the official website:
For software updates and further information, visit the official Launch website: www.dbscar.com.
9. User Tips
- Always ensure your diagnostic tool's software is up-to-date to maintain compatibility with the latest vehicle models and diagnostic protocols.
- Before starting any diagnostic session, confirm that the vehicle's ignition is ON (engine OFF) and the battery voltage is within the specified range (9-18V).
- When receiving your product, check all package contents to ensure everything is in order and well-packaged.
- For specific vehicle compatibility, especially for newer models or less common brands, it is recommended to consult the official Launch website or support resources.
- While the tool offers reset functions for Oil, SAS, and ETC, it does not typically support advanced reprogramming of components like acceleration bodies, power steering, or airbags. These usually require specialized programming tools.
10. Frequently Asked Questions (FAQ)
- Q: What vehicle models and years are supported by the CRP123 V2.0?
- A: The CRP123 V2.0 is designed to troubleshoot four systems (Engine, Transmission, ABS, SRS) for most major vehicles (cars, light trucks, minivans, SUVs) manufactured after 1996. For specific compatibility with a particular model or year (e.g., 2022 MG ZS 1.5 uplift), please refer to the official Launch website's compatibility list or contact their support.
- Q: Does this scanner support reprogramming functions?
- A: The CRP123 V2.0 offers specific reset services for Oil, SAS, and ETC. It is primarily a diagnostic tool for reading and clearing codes and viewing live data. It does not typically support advanced reprogramming of components like acceleration bodies, power steering, or airbags, which usually require more specialized programming equipment.
- Q: Can it read Mercosur vehicles?
- A: Vehicle compatibility can vary by region. Please check the official Launch website or contact their support with your specific vehicle details to confirm Mercosur region compatibility.
- Q: Can it scan a Renault DPO transmission?
- A: While the tool supports Transmission system diagnosis, specific compatibility with particular transmission types like Renault DPO should be verified with the latest software update information or by contacting Launch support directly.
- Q: Does this model perform odometer correction for cluster replacement?
- A: No, the CRP123 V2.0 does not support odometer correction for cluster replacement. This function typically requires specialized tools beyond the scope of this diagnostic scanner.