1. Introduction
Thank you for purchasing this mobile radio. The QYT KT-7900D is unique for its compact body, powerful output, and wide frequency range design. It features a new and personalized operation menu to provide an easy-to-use and exceptional operating experience. Its mini size and cost-effective price are designed to meet your communication needs.
To ensure the best performance and proper operation, please read this user manual carefully to familiarize yourself with all features and uses.
2. Important Safety Precautions
Please observe the following precautions to prevent fire, personal injury, or damage to the radio:
- Do not operate this machine while driving, as it can be dangerous.
- This radio is designed for use with a 13.8 V DC power supply. Do not use a 24 V power supply.
- Avoid placing the machine in dusty, moist, or water-splashing environments.
- In case of electromagnetic interference, keep the mobile radio away from sources such as TV sets, engine generators, etc.
- Do not expose the mobile radio to long periods of direct sunlight, for example, on the dashboard of a vehicle or close to heating appliances.
- If the mobile radio generates smoke or a strange smell, immediately turn off the power supply and ensure safety. Then, send the unit to the nearest after-sale center for inspection or repair.
- Avoid transmitting with high power output for extended periods, which may lead to overheating and cause automatic power off or failure.
3. Package Contents
Before operation, please check that all items are included in the package:
- QYT KT-7900D Mini Mobile Radio Transceiver
- Speaker Microphone
- Car Charger Power Cable
- Spare Fuse
- Mounting Bracket
- Screw Sets
- User Manual (this document)
Note: Some packages may include a USB programming cable or an antenna set depending on the specific variant purchased.
4. Product Overview
4.1. Front Panel Description
- Power On/Off, Volume Knob: Press to turn on/off, rotate to adjust volume.
- Mode Switch: Toggles between modes.
- Progress Knob: Used for navigation and confirmation.
- Monitor Button (MONI): Press to turn the squelch on or off.
- FM Radio Button (FM): Press to enter or exit FM radio function.
- Display Screen: Shows current frequency/channel, menu options, and status.
- Call Key (CALL): In standby, sends caller ID; in transmit, activates repeat signaling.
- V/M Button: Press to select radio mode; hold for seconds to select power output.
- Exit/A/B/C/D Button: Exits menu settings; selects A, B, C, D frequency in standby.
4.2. Rear Panel Description
- PTT/Microphone/GND: Connector for external PTT or microphone.
- DATA: Data input port.
- Fan: Cooling fan for heat dissipation.
- Antenna Connector: Connects to the external antenna.
- DC Power Supply: Input for 13.8V DC power.
4.3. Speaker Microphone Description
- MENU: Function key.
- UP: Tune up channel step.
- DOWN: Tune down channel step.
- EXIT: Exit A/B channel switch, emergency alarm, etc.
- */SCAN: Offset function, scan, digital.
- #/LOCK: Keypad lockout function, digital.
- 0-9: Number keys.
5. Installation
5.1. Mounting the Radio
Use the provided mounting bracket and screws to securely install the radio in your vehicle or desired location. Ensure the mounting surface is stable and can support the weight of the radio.
5.2. Power Connection
Connect the car charger power cable to the DC power supply input on the rear of the radio. Ensure the connection is secure. The radio requires a 13.8V DC power source.
5.3. Antenna Connection
Connect your external antenna to the antenna connector on the rear panel of the radio. Ensure the antenna is appropriate for the frequency bands you intend to use.
6. Basic Operation
6.1. Power On/Off and Volume Control
- Power On: Press the Power On/Off knob to turn on the radio.
- Power Off: Hold the Power On/Off knob for a few seconds to turn off the radio.
- Volume Adjustment: Rotate the Power On/Off knob to adjust the audio volume.
6.2. Display Screen
The display screen provides essential information about the radio's status:
- Top Line: Shows current working frequency/channel mode, signal strength, battery capability.
- Middle Lines: Displays main and secondary frequencies, language, and other status indicators.
- Bottom Line: Shows the model name (KT-7900D).
- Status Icons: Icons indicate features like scrambler, DTMF signaling, high power output, CTCSS/DCS, keypad lock, and transmit/receive reversal.
6.3. Hotkey Functions (Microphone Keypad)
- [MENU] Key: Hold to switch between channel mode and frequency mode. Press to enter menu function setting; hold to exit.
- [#] Key: Press to switch between High/Low transmit output power. Hold for seconds to Lock/Unlock the keypad.
- [EXIT/AB] Key: Hold for seconds to activate Alarm mode. Press to select present working frequency.
- [*] Key: Press to reverse the transmit and receive frequency. Hold for seconds to start Scan function.
- [0] Key: Hold for seconds to display present power supply voltage.
7. Advanced Features and Programming
7.1. Frequency Range Setting
To set the frequency range and transmit frequency, turn on the radio. When the welcome message appears, hold down the Progress/Confirm Key. The radio will display "PASSWORD". Enter the password to access and adjust the frequency settings.
Note: The password function allows reading and writing settings. Once set, the password is required to read or write via software.
7.2. Channel Memory
7.2.1. Same TX/RX Frequency Channel Memory
- Use the microphone keypad to enter the desired frequency (e.g., 146.6250).
- Press the microphone [MENU] key (or Progress/Confirm key).
- Select Menu 44.
- Press [MENU] key to select the desired channel (e.g., 001).
- Press [MENU] key again to save the frequency to the selected channel.
- To delete a memorized channel: Select Menu 45, press [MENU] key, select the channel, and press [MENU] again to delete.
7.2.2. Different TX/RX Frequency Channel Memory (CTCSS/DCS - Repeater Connection)
- Enter the desired frequency (e.g., 438.6250) using the microphone keypad.
- Press the microphone [MENU] key.
- Select Menu 10.
- Set the receive DCS figure using [MENU] key. Confirm with [MENU].
- Select Menu 11 to set the receive CTCSS figure using [MENU] key. Confirm with [MENU].
- Select Menu 12 to set the transmit DCS figure using [MENU] key. Confirm with [MENU].
- Select Menu 13 to set the transmit CTCSS figure using [MENU] key. Confirm with [MENU].
- Press [EXIT] to exit.
- To memorize the channel: Select Menu 44, press [MENU] key, select the channel, and press [MENU] again to save.
7.3. DTMF Signalling
This radio supports DTMF encode/decode. Users can program desired DTMF codes via PC software.
- DTMF Signalling: If the radio receives a pre-programmed DTMF signaling code, it will alert and display the code. Radios can communicate with each other within valid time.
- DTMF Transmit by Call Key: Select DTMF signal (Menu 18), then signal information code (Menu 22). Press [Call] key to transmit the selected DTMF code group.
7.4. 2-Tone and 5-Tone Signalling
The radio has 5-Tone coding/decoding functions. PC software can be used to input signal information codes.
- 2-Tone: Select 18 OPTSIG, then 2 TONE function. Select 22 S-INFO to choose pre-code signal group.
- 5-Tone: Select 18 OPTSIG, then 5 TONE function. Select 22 S-INFO to choose pre-code signal group.
- Press [Call] key to transmit 2-Tone or 5-Tone group codes.
7.5. PTT ID Setting
Use PC software to edit the PTT-ID code.
- Select Menu 18 (signal), then set the signal using [MENU] + [1] + [8] + [MENU] + [UP]/[DOWN] + [MENU].
- Set PTT launch (Menu 20) using [MENU] + [2] + [0] + [MENU] + [UP]/[DOWN] + [MENU].
- Set PTT transmit delay time (Menu 21) using [MENU] + [2] + [1] + [MENU] + [UP]/[DOWN] + [MENU].
- Press [PTT] to send the setting ID code.
7.6. Patrol Function
When receiving matched DTMF signaling (same as pre-programmed patrol code), the radio will emit its own ID code, which will display on the master control radio. This function can be controlled by a master ID code or not, and is programmable via PC software.
7.7. Monitor Function
When receiving matched DTMF signaling (same as pre-programmed monitor code), the radio will transmit to monitor the surrounding voice. This function can be controlled by a master ID code or not, and is programmable via PC software.
7.8. Remote Stun, Kill, and Revive
- Remote Stun: Disables transmitting when a matched remote stun code is received. The radio will alert on the display.
- Remote Kill: Disables transmitting, receiving, and all activities when a matched remote kill code is received. The radio will alert on the display.
- Remote Revive: Restores normal operation after a remote stun or kill when a matched remote revive code is received.
These functions can be controlled by a master ID code or not, and are programmable via PC software.
7.9. Emergency Alarm
When receiving a matched DTMF emergency alarm code, the radio will emit an emergency alarm. The alarm mode and channel are PC programmable. This function is not controlled by master ID code and RX signaling.
7.10. Repeater Function
The radio supports various repeater transpond modes, configurable in the menu (REP-M, REP-S).
9. Troubleshooting
If you encounter issues with your QYT KT-7900D radio, please refer to the following common problems and solutions:
- No Power: Check power cable connection and fuse. Ensure the power source is 13.8V DC.
- No Reception/Transmission: Verify antenna connection. Check frequency settings and ensure they are within the radio's operating range. Confirm squelch settings (SQL).
- Poor Audio Quality: Check microphone connection. Adjust volume. Ensure no electromagnetic interference sources are nearby.
- Radio Overheating: Avoid prolonged high-power transmissions. Ensure adequate ventilation around the unit.
- Programming Issues: Ensure you are using the correct PC software and drivers. Contact the seller if you need the software.
- Clicks during Scanning/Switching: This is normal behavior due to internal relay switching.
If the problem persists, please contact customer support or a qualified technician.
10. Specifications
10.1. General Specifications
| Attribute | Value |
|---|---|
| Brand Name | QYT |
| Model Number | KT-7900D |
| Use | Motor vehicle |
| Walkie Talkie Type | Car |
| Material | PLASTIC+Metal |
| Is_Display | Yes |
| Waterproof / Water-Resistant | IP55 |
| Maximum Range | 10km-50km |
| Origin | Mainland China |
| Certification | CE |
| Frequency Range | VHF: 136-174MHz; 220-270MHz; UHF: 350-390MHz; 400-480MHz |
| Storage Channel | 200 channels |
| Channel Spacing | 25KHz / 20KHz / 12.5KHz |
| Channel Step | 2.5KHz / 5KHz / 6.25KHz / 10KHz / 12.5KHz / 25KHz |
| Working Voltage | 13.8V DC ± 15% |
| Squelch Way | CARRIER / CTCSS / DCS / 5Tone / 2Tone / DTMF |
| Frequency Stability | ± 2.5ppm |
| Operating Temperature | -20 ~ +60℃ |
| Dimensions (W x H x D) | 98(W) x 35(H) x 118(D)mm (103 x 47 x 126 mm) |
| Weight | 408g |
| Output Power(w) | 10w-25w |
| Battery Capacity(mAh) | depends on radio |
| Rechargeable battery included | No |
| Battery Included | no |
| High-concerned chemical | none |
| Qyt Model | analog |
10.2. Receiver Specifications (ETSI EN 300 086 Standardized Test)
| Attribute | Wide Band | Narrow Band |
|---|---|---|
| Sensitivity | ≤0.25μV | ≤0.35μV |
| Adjacent Channel Selectivity | ≥70dB | ≥60dB |
| Intermodulation | ≥65dB | ≥60dB |
| Spurious Rejection | ≥70dB | ≥70dB |
| Audio response | +1~-3dB (0.3~3KHz) | +1~-3dB (0.3~2.55KHz) |
| Hum & Noise | ≥45dB | ≥40dB |
| Audio Distortion | ≤5% | |
| Audio output power | ≥2W@10% |
10.3. Transmitter Specifications (ETSI EN 300 086 Standardized Test)
| Attribute | Wide Band | Narrow Band |
|---|---|---|
| Output power | 25W/20W(VHF/UHF) | |
| Modulation Mode | 16KQF3E | 11KΦF3E |
| Adjacent Channel Selectivity | ≥70dB | ≥60dB |
| Hum & Noise | ≥40dB | ≥36dB |
| Spurious Emission | ≥60dB | ≥60dB |
| Audio response | +1~-3dB (0.3~3KHz) | +1~-3dB (0.3~2.55KHz) |
| Audio distortion | ≤5% |
Attention: Above specifications are subject to change without any notice due to technology enhancement.
11. User Tips
- Programming Software: If you need the programming software, please contact the seller for assistance.
- Satcom Operation: The radio can be programmed for Satcom use, and it generally works well for both reception and transmission, with an output power of around 10W. Some users prefer older firmware versions (e.g., 2016) for Satcom.
- External Speaker: Be cautious when connecting an external speaker; the connector may not be monophonic, which could affect functionality.
- Display Customization: The display color can be changed via the menu settings (MAINFC, MAINBC, MENUFC, MENUBC, STA-FC, STA-BC, SIG-FC, SIG-BC).
- Normal Operation Sounds: Audible clicks during scanning or channel switching are normal and indicate internal relay operations.
12. Frequently Asked Questions (FAQ)
- Q: What are the dimensions of the radio?
- A: The dimensions are 98(W) x 35(H) x 118(D)mm.
- Q: What is the battery capacity?
- A: The battery capacity depends on the specific radio model and is not included as it's a mobile radio designed for vehicle power.
- Q: Does it work for Satcom (satellite communication) for both reception and transmission?
- A: Yes, it works for Satcom after appropriate programming/expansion, providing around 10W output power.
- Q: Does it work in the river band (300-350 MHz)?
- A: Yes, it works in this range after opening/programming.
- Q: How is the modulation and speaker volume?
- A: The speaker is loud, and the microphone also works loudly.
- Q: Does it have a repeater function?
- A: Yes, a repeater can be configured using two such stations.
- Q: Does it support AM modulation for the air band?
- A: No, it supports FM modulation only.
- Q: Does this unit have quad watch functions (monitoring four channels simultaneously)?
- A: Yes, it can monitor four channels simultaneously.
- Q: Will this unit receive up to 490.000 MHz?
- A: Yes, it can receive up to 490.000 MHz.
- Q: Does the radio have Cross fit tuning?
- A: No, this radio does not have Cross fit tuning.
- Q: Is a power cable for the cigarette lighter included?
- A: Yes, a car charger power cable is included.
- Q: What is the maximum power consumption?
- A: The maximum power consumption is 5 Amps.
13. Warranty and Support
13.1. Warranty
A 12-month warranty is offered for the machine itself. Accessories are covered by a 6-month warranty.
Every unit is tested before shipping. If a defective unit is received, please contact us within 3 days of parcel receipt for a replacement. If the item is defective within 30 days of receiving, we will cover one-way shipping for warranty. If defective after 30 days, buyers will be responsible for all extra shipping fees.
13.2. Return Policy
All returned items must be in their original condition, including the box, packaging, and all other accessories.
13.3. Customer Support
We are committed to fulfilling your requirements. If you have any problems, please contact us immediately. We will respond within 24 hours and work with you until you are satisfied.