1. Product Overview
The Dooya DC1603 is a single-channel timing remote controller designed for use with various Dooya electric curtain motors, including models KT320E, DT52E, KT82TN, and DT360E. This remote allows for convenient control of your electric curtains, including timing functions for automated opening and closing.

The remote features a display screen and several buttons for operation:
- Screen: Displays current time, channel, and timing settings.
- Up Arrow Button: Moves the curtain up (opens).
- Stop/Pause Button: Stops the curtain movement.
- Down Arrow Button: Moves the curtain down (closes).
- Left/Right Arrow Buttons: Used for navigating menus, adjusting time, or selecting channels/settings.
2. Setup
2.1 Battery Installation
The Dooya DC1603 remote controller requires batteries, which are not included in the package. Please refer to the battery compartment on the back of the remote for the correct battery type and polarity.
- Open the battery compartment cover on the back of the remote.
- Insert the required batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
2.2 Pairing with Motor
The remote controller must be paired with your Dooya electric curtain motor before use. The pairing process typically involves a sequence of button presses on both the motor and the remote. Refer to your specific Dooya motor's instruction manual for detailed pairing steps. A general procedure is as follows:
- Ensure your Dooya motor is powered on.
- Locate the pairing button or function on your motor (this may vary by motor model).
- On the DC1603 remote, press and hold the pairing button (often a small recessed button or a combination of main buttons) until the motor responds (e.g., jogs slightly or beeps).
- Confirm successful pairing by testing the basic Up/Down/Stop functions.
Note: This remote is designed for Dooya RF433 Fixed Code motors. Ensure your motor is compatible.
3. Operating Instructions
3.1 Basic Control
- Press the Up Arrow button to open the curtain.
- Press the Down Arrow button to close the curtain.
- Press the Stop/Pause button to halt the curtain at any desired position.
3.2 Timing Function
The DC1603 remote controller features a timing function to automatically open and close your curtains at set times. Detailed instructions for setting the time and programming schedules will be specific to the remote's firmware. Generally, the steps involve:
- Setting Current Time: Use the Left/Right arrow buttons to navigate to the time setting menu. Adjust hours and minutes using the Up/Down arrows and confirm with a designated button (e.g., Stop/Pause or a dedicated 'Set' button).
- Programming Schedules: Access the timing schedule menu. You can typically set multiple open and close times for different days or daily repeats. Select the desired time, action (open/close), and confirm.
- Activating/Deactivating Timing: Ensure the timing function is enabled once schedules are set. There is usually an indicator on the screen.
Consult the remote's on-screen menu and accompanying quick start guide (if any) for precise timing setup procedures.
4. Maintenance
- Battery Replacement: Replace batteries promptly when the display dims or the remote's range decreases. Always use new batteries of the correct type.
- Cleaning: Wipe the remote with a soft, dry cloth. Do not use abrasive cleaners or immerse the remote in water.
- Storage: Store the remote in a dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
5. Troubleshooting
- Remote Not Responding:
- Check battery level and replace if necessary.
- Ensure the remote is within the effective control range (up to 30 meters through 2 walls).
- Verify that the remote is correctly paired with the motor. Re-pair if unsure.
- Curtain Not Moving to Set Position:
- Check for any obstructions in the curtain track.
- Ensure the motor is receiving power.
- If using timing, verify the programmed times and that the timing function is active.
- Display Issues:
- If the display is dim or flickering, replace the batteries.
- If the display is blank, check battery installation and power.
If problems persist after following these steps, contact customer support or a qualified technician.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | DC1603 |
| Item Type | Single-channel timing remote controller |
| Frequency | RF433 |
| Control Distance | 30 meters (through 2 walls) |
| Battery | Not included |
| Compatibility | Dooya KT320E, DT52E, KT82TN, DT360E electric curtain motors (RF433 Fixed Code) |
| Origin | Mainland China |
| Dimensions (L x W x H) | 15 cm x 10 cm x 5 cm |
| Weight | 0.3 kg |
7. User Tips
- Reliable Performance: Users have reported that the DC1603 remote works flawlessly, performing as expected for controlling Dooya curtain motors.
- Battery Check: Always ensure fresh batteries are installed for optimal range and responsiveness.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your original purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.
9. Product Video
Watch this video for a visual demonstration of the Dooya DC1603 remote controller and its functions.