retekess TR101

Contents

RETEKESS TR101 FM Headphone Radio Receiver User Manual

Model: TR101

1. Introduction

The RETEKESS TR101 is a portable FM headphone radio receiver designed for various applications, including personal listening, conference interpretation, and tour guiding. It features a built-in FM radio with station presets, a 3.5mm AUX input for external audio sources, and an adjustable design for comfort.

RETEKESS TR101 FM Headphone Radio Receiver
Figure 1: RETEKESS TR101 FM Headphone Radio Receiver, front view with antenna extended.

2. Key Features

  • FM Radio Functionality: Built-in FM radio with a frequency range of 87.50-108MHz.
  • 10 Station Presets: Allows for storing and quick access to your favorite FM stations.
  • 3.5mm AUX Input: Connect external audio devices using a standard 3.5mm AUX cable.
  • Adjustable Volume: 15 levels of volume control for personalized listening.
  • Comfortable Design: Features an adjustable headband and comfortable earcups for extended wear.
  • Clear Reception: Signal to noise ratio (SNR) of 45dB for clear audio.
  • Stereo Sound: Supports stereo FM reception.

3. Package Contents

Please check the package for the following items:

  • 1 x TR101 FM Headset Radio Receiver
  • 1 x English User Manual

4. Setup

4.1. Battery Installation

The TR101 requires 2 x AA batteries (not included) for operation.

  1. Locate the battery compartment on one of the earcups.
  2. Gently slide open the battery compartment cover.
  3. Insert two AA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
  4. Close the battery compartment cover securely.
Battery compartment open with AA batteries
Figure 2: Battery compartment for 2x AA batteries, shown open.

4.2. Adjusting the Headband

For optimal comfort and sound quality, adjust the headband to fit your head snugly.

  1. Hold the earcups and gently extend or retract the headband on both sides.
  2. Position the earcups over your ears so they are comfortable and provide good sound isolation.
Adjustable headband mechanism
Figure 3: Adjustable headband mechanism for a customized fit.

5. Operating Instructions

5.1. Control Panel Overview

Control panel with display and buttons
Figure 4: Control Panel of the TR101 Headset, showing the digital display and various buttons.

The control panel is located on the right earcup and features a digital display and several buttons:

  • POWER: Turns the headset on or off.
  • S/M: Likely for Scan/Manual tuning or Stereo/Mono mode selection.
  • M1: Memory preset 1 button.
  • TUN- / TUN+: Tune down/up the FM frequency.
  • VOL- / VOL+: Decrease/increase volume.
  • MEM: Memory button for storing stations.
  • Number Buttons (0-9): For direct frequency input or recalling preset stations.

5.2. Power On/Off

Press the POWER button to turn the headset on. Press and hold the POWER button again to turn it off.

5.3. FM Radio Tuning

  1. Automatic Scan: Press the S/M button (if available for scan) to automatically scan and store available FM stations.
  2. Manual Tuning: Use the TUN- and TUN+ buttons to manually adjust the frequency.
  3. Direct Frequency Input: Use the number buttons (0-9) to directly enter a desired FM frequency. For example, to tune to 106.7 MHz, you might press 1-0-6-7.

5.4. Storing and Recalling Preset Stations

The TR101 allows you to store up to 10 FM stations for quick access.

  1. Tune to the desired FM station using manual or direct tuning.
  2. Press the MEM button. The display may flash a preset number.
  3. Use the number buttons (0-9) to select a memory slot (e.g., 1-0 for 10 presets).
  4. Press MEM again to confirm and save the station.
  5. To recall a stored station, simply press the corresponding number button (0-9).

5.5. Volume Adjustment

Use the VOL- button to decrease the volume and the VOL+ button to increase it. The headset offers 15 levels of volume control.

15 level volume control illustration
Figure 5: Visual representation of 15 volume levels.

5.6. Using the 3.5mm AUX Input

To use the headset with an external audio source (e.g., computer, MP3 player):

  1. Connect one end of a 3.5mm AUX cable (not included) to the AUX IN jack on the headset.
  2. Connect the other end of the AUX cable to the audio output jack of your external device.
  3. The headset should automatically switch to AUX input mode. If not, you may need to press the S/M button or a dedicated mode button if available.
  4. Adjust the volume using the headset's volume controls or your external device's volume.
3.5mm AUX in jack
Figure 6: Location of the 3.5mm AUX IN jack on the headset.

6. Maintenance

6.1. Cleaning

  • Wipe the headset with a soft, dry cloth.
  • Do not use abrasive cleaners, solvents, or strong chemicals, as these may damage the surface.
  • Keep the earcups clean to maintain hygiene and comfort.

6.2. Battery Care

  • Remove batteries if the headset will not be used for an extended period to prevent leakage.
  • Dispose of used batteries according to local regulations.

6.3. Storage

  • Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid placing heavy objects on the headset to prevent damage.

7. Troubleshooting

Problem Possible Cause Solution
Headset does not power on. Batteries are dead or incorrectly installed. Replace with fresh AA batteries, ensuring correct polarity.
Poor FM reception or static. Weak signal, interference, or antenna not extended. Extend the antenna fully. Move to a location with better signal. Try manual tuning.
No sound from AUX input. AUX cable not properly connected or external device volume is low. Ensure AUX cable is securely plugged into both the headset and the external device. Check volume levels on both devices.
Sound is mono when expecting stereo. Stereo/Mono mode is incorrectly set. Press the S/M button to toggle between stereo and mono modes.

8. User Tips

  • The headset remembers the last tuned frequency and volume level when powered off, allowing for quick resumption of listening.
  • Battery life can be extended by using quality AA batteries; some users report several months of use.
  • When using the AUX input with devices like metal detectors, users have reported minimal interference and good sound quality, comparable to wired connections.
  • While the headset is designed for comfort, some users have noted that the plastic components should be handled with care to ensure longevity.

9. Specifications

Feature Detail
Brand Name retekess
Model Number TR101
Dimensions (WxHxD) 120*120*90mm
Body Material Plastic
Screen Yes
Style Portable
Type FM
Function Audio output via headphones
Origin Mainland China
Certification CE, FCC
FM Frequency 87.50-108MHz
Battery 2 x AA batteries (not included)
SNR (Signal to Noise Ratio) 45dB
Sensitivity ≤18dB
Stereo Degree of Separation 45dB
Frequency Response 200Hz-20000Hz
Weight 297g / 0.4lb
Is it stereo? Yes

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.