1. Introduction
This manual provides essential information for the proper installation, use, and maintenance of the Hikvision DS-1280ZJ-S Aluminum Alloy Junction Box. This junction box is designed to provide a secure and organized housing for wiring connections of dome cameras, suitable for both indoor and outdoor applications.
For additional information, you may refer to the official user manual PDF: User manual (PDF).
2. Product Features
- Material: Constructed from durable aluminum alloy.
- Surface Treatment: Features a surface spray treatment for enhanced durability and aesthetics.
- Waterproof Design: Engineered with a waterproof design, making it suitable for outdoor installations.
- Cable Management: Includes a cable hole on the bracket for neat and protected cable routing.
- Color Options: Available in Black and White finishes.

3. Specifications
| Parameter | Description |
|---|---|
| Model | DS-1280ZJ-S |
| Appearance | Hikvision White / Black |
| Material | Aluminum Alloy |
| Dimensions (Diameter x Height) | Φ 137 mm x 53.4 mm |
| Weight | 527 g |
| Max Load Capacity | 4.5 KG |

Package Dimensions:
- Length: 23 cm
- Width: 15 cm
- Height: 9 cm
- Weight: 0.65 kg
4. Safety Information and Important Notices
- The device must be placed in a safe area to prevent accidental drops and potential injury.
- The bracket should be installed on a flat wall surface to ensure stability.
- For outdoor applications, it is crucial to use waterproof rubber seals to prevent water ingress and protect internal wiring.
- The mounting wall must be capable of supporting a weight of over 3 times the total weight of the camera and the junction box combined.
- The maximum load capacity for this bracket is 4.5 KG. Do not exceed this limit.
5. Setup and Installation
Follow these general steps for installing the DS-1280ZJ-S junction box:
- Select Mounting Location: Choose a flat, sturdy wall surface that can support the combined weight of the junction box and the camera. Refer to Section 4 for load capacity guidelines.
- Prepare the Surface: Ensure the mounting surface is clean and free from debris.
- Mark Drilling Points: Use the junction box as a template to mark the positions for drilling screw holes. Refer to Figure 3.1 for the hole pattern.
- Drill Holes: Drill pilot holes at the marked positions.
- Install Waterproof Rubber (Outdoor Use): If installing outdoors, apply waterproof rubber seals around the cable entry points and between the junction box and the mounting surface to ensure a watertight seal.
- Mount the Junction Box: Secure the junction box to the wall using appropriate screws and anchors. Ensure it is firmly attached.
- Route Cables: Pass the necessary camera cables through the designated cable hole on the side of the junction box.
- Connect Wiring: Make all necessary electrical connections inside the junction box. Ensure all connections are secure and properly insulated.
- Attach Camera: Mount the dome camera onto the junction box, aligning the mounting holes. Secure the camera with its respective screws.
- Final Check: Verify all connections are tight, the box is securely mounted, and all seals are in place, especially for outdoor installations.



6. Operation
The Hikvision DS-1280ZJ-S is a passive junction box designed to house and protect wiring connections. It does not require active operation or configuration once properly installed. Its function is to provide a secure, weather-protected enclosure for camera cables and connections.
7. Maintenance
- Regular Inspection: Periodically inspect the junction box for any signs of wear, damage, or loose connections, especially after severe weather conditions.
- Cleaning: Clean the exterior of the junction box with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish or seals.
- Seal Integrity: For outdoor installations, regularly check the integrity of the waterproof rubber seals. Replace any cracked or degraded seals to maintain weather protection.
- Tighten Fasteners: Ensure all mounting screws and camera attachment screws remain tight to prevent movement or detachment.
8. Troubleshooting
- Water Ingress: If moisture or water is found inside the junction box, immediately disconnect power to any connected devices. Inspect all seals and cable glands for proper installation and damage. Replace faulty seals or re-seal connections as necessary.
- Loose Mounting: If the junction box feels loose or unstable, check and tighten all mounting screws. Ensure the wall surface is still structurally sound and can support the load.
- Cable Damage: If cables appear frayed or damaged at the entry points, ensure the cable glands are properly tightened to prevent strain. Replace damaged cables if necessary.
9. Warranty and Support
This Hikvision product comes with a 3-year warranty. For warranty claims, technical support, or further assistance, please contact your authorized Hikvision dealer or visit the official Hikvision website at https://www.hikvision.com/.
10. Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.
11. RoHS Conformity Statement
This product and - if applicable - the supplied accessories too are comply with the applicable harmonized European standards listed under the RoHS Directive 2011/65/EU.