ORVIBO ZigBee Multi-Functional Relay

Contents

ORVIBO ZigBee Multi-Functional Relay User Manual

Model: ZigBee Multi-Functional Relay

1. Product Overview

The ORVIBO ZigBee Multi-Functional Relay is a smart device designed to integrate traditional electrical appliances into your smart home system. It utilizes ZigBee wireless communication to allow remote control and automation through the HomeMate application on iOS and Android devices. This relay supports various modes, including strong motor, weak motor, and general relay functions, making it versatile for different applications.

Front view of the ORVIBO ZigBee Multi-Functional Relay
Figure 1: Front view of the ORVIBO ZigBee Multi-Functional Relay.
Angled view of the ORVIBO ZigBee Multi-Functional Relay
Figure 2: Angled view of the ORVIBO ZigBee Multi-Functional Relay.

2. Specifications

Attribute Value
Brand Name ORVIBO (also listed as Glocalme in some specifications)
Model Number ZigBee Multi-Functional Relay
Power Source AC (100-240V~)
Max Current 5A
Communication Method Zigbee
State of Assembly Ready-to-Go
Control Channels 3 channels
Certification CE
Origin Mainland China
Battery Included No
Inbox Adaptor No
Wireless Communication (other than Zigbee) No
High-concerned chemical None
Gyro None
Scale 1:5
Max Speed 222
Features Solar

3. Setup

Before beginning installation, ensure the main power supply to the circuit you are working on is turned OFF at the breaker. Incorrect wiring can cause damage to the device or connected appliances.

3.1 DIP Switch Configuration

The relay features DIP switches on the back to select the operating mode. It is crucial to set these switches correctly before connecting any power or wiring.

Back view of the ORVIBO ZigBee Multi-Functional Relay showing wiring diagram and DIP switch settings
Figure 3: Back view with wiring diagram and DIP switch settings.

WARNING: Do not toggle two or more DIP switches simultaneously. Incorrect operation may damage the product.

  • DIP Switch 1: Strong Motor Mode
  • DIP Switch 2: Weak Motor Mode
  • DIP Switch 3: General Relay Mode

3.2 Wiring Instructions

Refer to the diagram on the back of the device (Figure 3) and the table below for correct wiring based on your selected mode. Ensure all connections are secure.

Function Wiring Terminals (1-8)
Strong Motor OPEN CLOSE L N L
Weak Motor OPEN COM CLOSE COM STOP COM N L
Relay 1 2 3 4 5 6 7 8

Terminal Labels:

  • L: Live/Phase Wire
  • N: Neutral Wire
  • COM: Common Terminal
  • OPEN: Normally Open Terminal
  • CLOSE: Normally Closed Terminal
  • STOP: Stop Terminal (for motor control)

3.3 Pairing with HomeMate App

  1. Ensure your ZigBee hub (gateway) is powered on and connected to your network.
  2. Download and install the HomeMate app from the App Store (iOS) or Google Play Store (Android).
  3. Open the HomeMate app and log in or create an account.
  4. Follow the app's instructions to add a new ZigBee device. This usually involves putting the hub into pairing mode and then activating the relay's pairing mode (refer to the relay's specific pairing button/sequence, typically a long press on a button or power cycling).
  5. Once detected, name your relay and assign it to a room or group within the app.

4. Operating the Device

After successful setup and pairing, you can control the ORVIBO ZigBee Multi-Functional Relay through the HomeMate app.

  • Remote Control: Use the HomeMate app to turn connected appliances ON or OFF from anywhere.
  • Scheduling: Set up schedules for your appliances to turn on or off automatically at specific times.
  • Automation: Create smart scenes or automations based on other smart devices (e.g., turn on lights when a motion sensor is triggered).
  • Voice Control: If integrated with a compatible voice assistant (e.g., Amazon Alexa, Google Assistant) through your ZigBee hub, you can control the relay using voice commands.

5. Maintenance

  • Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Environment: Keep the relay away from excessive moisture, heat, and direct sunlight.
  • Firmware Updates: Periodically check the HomeMate app for any available firmware updates for your relay and ZigBee hub to ensure optimal performance and security.
  • Connection Check: Ensure all wiring connections remain secure over time.

6. Troubleshooting

  • Device Not Responding:
    • Check if the relay is powered on.
    • Verify the ZigBee hub is online and functioning correctly.
    • Ensure the relay is within range of the ZigBee hub or a ZigBee repeater.
    • Try power cycling the relay (turn off power at the breaker, wait 10 seconds, then turn back on).
    • Re-pair the device with the HomeMate app if necessary.
  • Cannot Pair Device:
    • Ensure the ZigBee hub is in pairing mode.
    • Confirm the relay is in pairing mode (refer to its specific instructions).
    • Check for interference from other wireless devices.
    • Make sure the relay is close enough to the hub during the pairing process.
  • Connected Appliance Not Working:
    • Verify the appliance itself is functional when directly connected to power.
    • Double-check all wiring connections to the relay according to the selected DIP switch mode.
    • Ensure the correct DIP switch mode is selected for the type of appliance.

7. User Tips

  • ZigBee Mesh Network: For larger homes, consider adding more ZigBee devices (like smart plugs or light bulbs) that can act as repeaters to strengthen your ZigBee mesh network and improve relay responsiveness.
  • Safety First: Always prioritize safety. If you are unsure about electrical wiring, consult a qualified electrician.
  • App Exploration: Spend time exploring the HomeMate app's features. Many advanced automations and scenes can be created to enhance your smart home experience.

8. Warranty and Support

For warranty information and technical support, please refer to the official ORVIBO website or contact your retailer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.