1. Product Overview
The Spurtar 32 Blades Feeler Gauge Set is a precision measuring tool designed for accurately determining the clearance or gap between two parts. It features 32 individual blades, each marked with both metric and imperial measurements, allowing for versatile use in various applications such as engine valve adjustments, spark plug gap checks, and other fine mechanical measurements.

Image: The 32-blade feeler gauge fanned out, displaying the metric measurements etched on each blade.
The blades are made from durable 65 manganese steel, ensuring flexibility and longevity. The foldable design makes the tool compact and easy to store and transport.

Image: Visual guide showing the feeler gauge in various states: folded, fanned out, a close-up of a single blade, and the blades detached from the holder.
2. Setup
- Unpacking: Carefully remove the feeler gauge from its packaging.
- Initial Inspection: Inspect the feeler gauge for any signs of damage or manufacturing defects. Ensure all 32 blades are present and securely attached to the holder.
- Anti-Rust Oil: You may notice a thin layer of anti-rust oil on the blades. This is normal and applied to prevent corrosion during storage and transit. Wipe off any excess oil with a clean, dry cloth before first use.
3. Operating Instructions
Follow these steps for accurate gap measurement:
- Identify Required Thickness: Determine the desired gap measurement (e.g., from a service manual or specification sheet).
- Select Blade(s): Fan out the blades and select the blade(s) corresponding to the required thickness. For intermediate measurements, you may combine multiple blades. The measurements are clearly etched on each blade for easy identification.
- Insert Blade: Gently insert the selected blade(s) into the gap you wish to measure. The blade should slide in with a slight drag. If it slides in too easily, the gap is larger than the blade's thickness. If it cannot be inserted, the gap is smaller.
- Verify Fit: The correct blade thickness is achieved when the blade can be inserted and withdrawn with a consistent, light drag, without forcing it.
- Read Measurement: The thickness of the blade (or combined blades) that provides the correct fit is your measurement.

Image: An example of the feeler gauge in use, measuring a gap in an engine component.
4. Maintenance
- Cleaning: After each use, wipe the blades clean with a soft, dry cloth to remove any dirt, grease, or moisture.
- Lubrication: Periodically apply a thin layer of light machine oil to the blades to prevent rust and ensure smooth operation.
- Storage: Fold the feeler gauge neatly and store it in a dry, clean environment to protect it from dust and moisture.
- Blade Replacement/Removal: The blades are designed to be removable, allowing for individual cleaning or replacement if necessary. Use a small screwdriver to loosen the retaining screw, remove the desired blade(s), and reassemble securely.

Image: Detailed product display showing a hand holding a feeler blade, a close-up of the dual-marked measurements, and the removable design of the blades.
5. Troubleshooting
- Blades are Stiff: If the blades are difficult to fan out or move, apply a small amount of light machine oil to the pivot point and between the blades.
- Inconsistent Readings: Ensure the surfaces being measured are clean and free of debris. Verify that the blade is inserted straight and not at an angle. Avoid forcing the blade into a gap, as this can bend the blade or provide an inaccurate reading.
- Rust Appears: If rust spots appear, clean the affected area with a fine abrasive pad (e.g., Scotch-Brite) and immediately apply a protective layer of anti-rust oil. Proper storage and regular lubrication can prevent rust.
6. Specifications
| Feature | Detail |
|---|---|
| Material | 65 Manganese Steel |
| Number of Blades | 32 |
| Measurement Type | Metric and Imperial (Dual Marked) |
| Metric Range | 0.03 mm to 1.00 mm |
| Imperial Range | 0.001 inch to 0.040 inch |
Individual Blade Sizes:

Image: Diagram illustrating the full range of 32 metric and imperial blade sizes included in the feeler gauge set.
Metric Sizes (mm):
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.10
- 0.13
- 0.15
- 0.18
- 0.20
- 0.23
- 0.25
- 0.28
- 0.30
- 0.33
- 0.35
- 0.38
- 0.40
- 0.45
- 0.50
- 0.55
- 0.60
- 0.63
- 0.65
- 0.70
- 0.75
- 0.80
- 0.85
- 0.90
- 1.00
Inch Sizes:
- 0.001
- 0.0015
- 0.002
- 0.0025
- 0.0028
- 0.003
- 0.0035
- 0.004
- 0.005
- 0.006
- 0.007
- 0.008
- 0.009
- 0.010
- 0.011
- 0.012
- 0.013
- 0.014
- 0.015
- 0.016
- 0.018
- 0.020
- 0.022
- 0.024
- 0.025
- 0.026
- 0.028
- 0.030
- 0.032
- 0.034
- 0.036
- 0.040
7. User Tips
- This feeler gauge set is highly regarded for its good quality and accuracy, making it a reliable tool for various mechanical tasks.
- Users appreciate the large selection of measuring plates, which provides great versatility for different measurement needs.
- It is considered an essential and practical tool for mechanics, offering excellent value for money.
- The precision of the blades, particularly the 0.01 mm increments, is noted for its perfect quality.
8. Warranty and Support
For any questions regarding the operation, maintenance, or specifications of your Spurtar 32 Blades Feeler Gauge Set, please contact the retailer or manufacturer's customer support. Keep your purchase receipt as proof of purchase for any warranty claims.