1. Introduction
The TYT TH-UV8000D is a high-power, dual-band handheld FM transceiver designed for reliable two-way communication. Featuring a robust build and a 3600mAh battery, it offers extended operational time and clear communication across its wide frequency range. This manual provides essential information for the safe and efficient use of your TH-UV8000D radio.

2. Package Contents
Upon unpacking, please ensure all items are present and in good condition:
- TYT TH-UV8000D Handheld Transceiver
- 3600mAh Li-ion Battery Pack
- Desktop Charger with AC Adapter
- Antenna (Standard)
- Long Antenna (Extended range)
- Belt Clip
- Hand Strap
- User Manual (this document)

3. Specifications
| Feature | Specification |
|---|---|
| Brand Name | TYT |
| Model Number | TH-UV8000D |
| Walkie Talkie Type | Portable |
| Frequency Range | 136-174MHz & 400-520MHz (Dual Band) |
| Output Power (W) | 5W-10W (Note: Actual maximum power may be around 8W depending on band and battery voltage) |
| Battery Capacity (mAh) | 3600mAh |
| Battery Included | Yes |
| Waterproof / Water-Resistant | IP55 |
| Material | PLASTIC+Metal |
| Storage Channel | 128 (Can be programmed) |
| Dimensions | 13x6x3.5cm |
| Is_Display | Yes |
| Maximum Range | 5km-10km |
| Certification | CE |
4. Initial Setup
4.1 Battery Installation and Charging
- Align the battery pack with the grooves on the back of the radio.
- Slide the battery upwards until it clicks into place.
- To remove, press the battery release latch and slide the battery downwards.

Charging:
- Place the radio with the battery installed into the desktop charger.
- Connect the AC adapter to the charger and a power outlet (110-260V AC).
- The charging indicator light will show the charging status.
- The radio can also be charged via USB (constant voltage).
4.2 Antenna Installation
- Screw the desired antenna (standard or long) clockwise into the antenna connector on top of the radio until it is finger-tight. Do not overtighten.

5. Operating Instructions
5.1 Power On/Off and Volume Control
- To power on, rotate the Power/Volume knob clockwise.
- To power off, rotate the Power/Volume knob counter-clockwise until it clicks.
- Adjust the volume by rotating the Power/Volume knob.
5.2 Basic Communication
- Channel/Frequency Selection: Use the Up/Down arrow keys or the keypad to select your desired channel or frequency.
- Push-to-Talk (PTT): Press and hold the PTT button on the side of the radio to transmit. Speak clearly into the microphone. Release the PTT button to receive.

5.3 Dual Band and Dual Standby
The TH-UV8000D supports dual-band operation (VHF/UHF) and dual standby, allowing you to monitor two different frequencies simultaneously. Use the U/V button to switch between the upper and lower display frequencies for active transmission.
5.4 FM Radio Function
The transceiver includes an FM radio function (76.00 - 108.00 MHz). Refer to the full manual for specific instructions on activating and operating the FM radio mode.
5.5 Cross-Repeater Function
The cross-repeater function allows the radio to act as a temporary repeater, relaying signals between different frequency bands. This feature must be enabled and configured using the programming software on a computer.
5.6 Display and Keypad

The display shows current frequencies, channel numbers, battery status, and other operational indicators. The keypad allows for direct frequency entry, channel selection, and access to various menu functions.
5.7 Video Demonstration
6. Maintenance
- Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
- Battery Care: To prolong battery life, avoid overcharging and fully discharging the battery. Store the battery in a cool, dry place when not in use.
- Antenna Care: Ensure the antenna is securely attached. Avoid bending or stressing the antenna, as this can damage the connector.
- Water Resistance: The radio is rated IP55 for water and dust resistance. While it can withstand splashes, do not submerge it in water. Ensure all port covers are securely closed.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on. | Low or dead battery; improperly installed battery. | Charge the battery; ensure battery is correctly installed. |
| Cannot transmit or receive. | Incorrect frequency/channel; antenna not connected; low battery. | Verify frequency/channel settings; check antenna connection; charge battery. |
| Poor audio quality or static. | Weak signal; interference; damaged antenna. | Move to an area with better signal; check for sources of interference; inspect antenna for damage. |
| Cross-repeater not working. | Feature not enabled or incorrectly configured. | Connect to a computer and use programming software to enable and configure the cross-repeater function. |
8. User Tips
- Channel Scanning: The radio can pick up random channels when in search mode.
- Power Output: While advertised as 10W, actual maximum power output may be closer to 8W, varying with the selected band and battery voltage.
- Input Filters: This model features input filters, providing better performance and less interference compared to some other radios, especially in urban environments with many signals.
- Channel Capacity: The radio can be programmed for up to 128 channels, offering extensive customization for your communication needs.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for warranty claims.