Introduction
Thank you for choosing the MILESEEY S2/S7 Bluetooth Laser Rangefinder. This device is designed for precise distance measurement in various environments, including outdoor settings. It features advanced technologies like a pointfinder camera, P2P measurement, and Bluetooth app connectivity for enhanced functionality and data management.
This manual provides detailed instructions for the safe and efficient use of your laser rangefinder. Please read it thoroughly before operating the device.
Safety Information
Always observe the safety instructions provided to ensure safe operation and prevent damage to the device or injury.
- Do not stare directly into the laser beam.
- Do not aim the laser beam at people or animals.
- Keep the device out of reach of children.
- Use the device only for its intended purpose as described in this manual.
- Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
Package Contents
Verify that all items are present in your package:
- MILESEEY Laser Distance Meter (S7 Camera Version shown)
- User Manual
- USB Charging Cable
- AAA Batteries (for S2 model, or as emergency backup for S7)
- Wrist Strap
- Carrying Pouch

Device Overview
Familiarize yourself with the components and controls of your MILESEEY Laser Rangefinder.


- Measurement key
- Function keys
- Function setting key
- Laser icon
- Display
- Camera
- Add / Upgrade
- Less / Lower level
- Power button
- Battery cover
- Tripod screw hole
Setup
Power Supply
The device supports three power supply modes:
- Cycle charging: Using a Ni-MH rechargeable battery.
- Emergency battery life: 3 AAA non-rechargeable batteries.
- USB direct charge: Connect via USB cable.

Initial Power On
Press and hold the Power button (9) to turn on the device. The device will perform a self-check.
Operating Instructions
The MILESEEY Laser Rangefinder offers 15 measurement functions and 8 humanized modes for various applications.
Basic Measurement Functions
The device supports the following measurement types:

- Continuous measurement (minimum/maximum)
- Single measurement
- Area measurement
- Volume measurement
- One Pythagorean measurement
- Second Pythagorean measurement
- Pythagoras (2-point)
- Pythagoras (3-point)
- Auto level measurement
- Auto height measurement
- P2P (Point-to-Point) measurement
- Trapezium measurement (1 & 2)
- Triangle area measurement
- Circular area measurement
- Cylinder volume measurement
- Stake out function
- Add/Subtract measurements
Using the Pointfinder Camera (S7 Camera Version)
The S7 Camera Version includes a 2MP 4x zoom camera to help find measurement points, especially outdoors. The camera can be turned on to assist measurement in any mode.

P2P (Point-to-Point) Measurement
This technology allows for accurate measurements between any two points from a single remote location, utilizing a 360° high-accuracy tilt sensor and integrated smart base.

Bluetooth App Connectivity
The device features a built-in Bluetooth module for connection to an intelligent app (e.g., "Smart Life" or "JoyPlan") on mobile terminals (phones, tablets). This allows for:
- Entering dimensions directly onto on-site photographs.
- Drawing projects and constructing plans within the app.
- CAD-key export for efficient office work.



User Interface and Display
The device features a humanized UI with an intuitive navigation menu and a large 2.4" IPS HD color screen. The screen supports rotation for easy reading from any angle and can switch between white text on a black screen and black text on a white screen for optimal visibility in different lighting conditions.



8 Humanized Modes

- Unit switching: Four units available (m/ft/in).
- Bluetooth settings: Turn on Bluetooth and connect to the home app.
- History storage: Can save 1000 sets of data.
- 3D spirit level: Helps find the measurement angle accurately.
- Screen rotation: Only in single and continuous measurement modes.
- Constant setting: Move cursor, press to set add/subtract value.
- Delay measurement: Turn on delay measurement, align target, press MEAS key, automatic measurement after 5s countdown.
- Benchmark setting: Front, middle, and after three benchmark modes.
Video Demonstration of Measurement Functions
Maintenance
Cleaning and Care
- Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Ensure the lens is clean for accurate measurements.
Environmental Protection
The device has an IP65 protection grade, meaning it is completely protected against liquid and dust ingress, and low-pressure water jets. This allows for use in harsh environments.

Storage
- Store the device in its carrying pouch when not in use.
- Keep it in a dry place away from direct sunlight and extreme temperatures.
Troubleshooting
If you encounter issues with your device, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on | Low battery or no battery installed. | Charge the device via USB or replace AAA batteries. |
| Inaccurate measurements outdoors | Strong sunlight interference, complex light conditions, or target not easy to observe. | Utilize the pointfinder camera (S7 Camera Version) for better targeting. Ensure the target is clear. The device is designed with daylight anti-interference technology, but extreme conditions can still affect accuracy. |
| Bluetooth connection issues | Bluetooth not enabled on device or mobile, or app not installed/updated. | Ensure Bluetooth is enabled on both devices. Download/update the "Smart Life" app. |
| Screen rotation not working | Device might not be in single or continuous measurement mode. | Ensure the device is in a mode that supports screen rotation. |
| Cannot export data to computer | Incorrect USB connection or software issue. | Ensure the USB cable is properly connected. Data can be read directly from the machine or exported via USB. |
Specifications
| Feature | Detail |
|---|---|
| Brand Name | MiLESEEY |
| Model Number | P7AK/P7/S2... (S20 Camera Version, S7 Camera Version) |
| Measurement Accuracy | ±2mm |
| Measurement Range | 60m, 80m, 100m, 150m, 200m (depending on model) |
| Power Type | Rechargeable (Ni-MH) / 3x AAA (emergency) / USB Direct Charge |
| Special Feature 1 | Point to Point Space Measurement (P2P) |
| Special Feature 2 | Camera Finder (S7 Camera Version) |
| Bluetooth | Yes (with CAD Bluetooth APP) |
| Protection Grade | IP65 (Waterproof and Dustproof) |
| Screen | IPS HD Color Screen, Rotatable |
| Data Storage | Up to 1000 groups |
| Certification | CE, FCC, RoHS |
| Origin | Mainland China |
User Tips
- Outdoor Use: The device is designed for outdoor use and can measure effectively in daylight, thanks to its daylight anti-interference technology and pointfinder camera (S7 Camera Version).
- App Integration: Connect to an intelligent app (e.g., "Smart Life" or "JoyPlan") for advanced features like drawing projects, adding dimensions to photos, and CAD export.
- Tripod Compatibility: The device includes a tripod screw hole for stable and precise measurements, especially for P2P functions.
- Sound Control: The manual does not explicitly state if the key sound can be turned off. Check device settings or the app for this option.
- Data Transfer: Measurements can be read directly from the device or exported to a computer via USB.
Warranty and Support
This product is certified with CE, FCC, and RoHS standards, ensuring its quality and compliance.
For technical support, warranty claims, or further assistance, please contact the seller or manufacturer directly through the platform where the product was purchased.
Please retain your proof of purchase for warranty purposes.