KastKing Sharky III Spinning Reel

Contents

KastKing Sharky III Spinning Reel Instruction Manual

Model: Sharky III Spinning Reel

Brand: KastKing

Introduction

Congratulations on your purchase of a KastKing Sharky III Spinning Reel. This reel is manufactured with high-quality components and has been extensively tested to ensure your fishing experience is productive. Please take a moment to familiarize yourself with the integrated performance-enhancing features of this reel before use. This will help you to optimize the reel's settings and further increase your fishing success. We wish you the best of luck in your future fishing endeavors.

The KastKing Sharky III spinning fishing reel is designed to be lighter, smoother, and stronger. It features an efficient triple disc carbon fiber drag system with up to 39.5 lbs (18 KG) of max drag, 10+1 shielded stainless steel bearings, a braid fishing line ready aluminum spool, precision manganese brass alloy gears, a fiber-reinforced body, and an oversized stainless steel main shaft. These features combine to create a versatile reel suitable for both freshwater and saltwater fishing, capable of handling larger game fish.

For a detailed visual guide, please refer to the official user manual PDF: KastKing Sharky III User Manual (PDF)

Official product video showcasing the KastKing Sharky III Spinning Reel.

Setup

Components Name

Familiarize yourself with the main components of your KastKing Spinning Reel:

  • Spool
  • Drag knob
  • Line roller
  • Bail
  • Body
  • Spool line clip
  • Rotor
  • Anti-reverse lever
  • Handle

Assembling Your Outfit

  1. Assemble your rod and attach the reel.
  2. Thread the line through all the guides from the butt to the tip top.

How To Spool Line Your Own Spinning Rod

  1. Open the bail. This is the little wire arm on the reel that flips up and down. Up is open, down is closed.
  2. Tie the line on the arbor with an uni knot.
  3. Put the spool on the floor, making sure the line comes off the filler spool in a "Counter clockwise" direction (it doesn't matter if the label is face up or face down). This will help to reduce line twist while spooling on the reel. A spinning reel requires that the line be loaded onto the reel the same way it comes off the spool.
  4. With your free hand, use your thumb and index finger to apply light pressure to your line as you give the handle 15 to 20 turns. Always apply light pressure on the line while loading it, otherwise the line will go on loose and tangle later.
  5. Fill your spool until it is 1/8th inch from the rim. Overfilling or underfilling your spool will create problems when you cast.
  6. Congratulations! You're all done. You can use a rubber band to secure your line on the spool, or wrap it around the tab in your spool (if it comes with one).

How To Set The Drag On Your Reel

The scale method is the most accurate way to set your drag. You can try to set the drag by feel, many people do. But many of these anglers have their drag set too tight and too tight equals lost fish.

  1. Tie the line to the hook of the scale.
  2. Hold the rod at a 45° angle.
  3. Pull down on the scale. Take a reading on the scale the moment the drag begins to slip.
  4. Adjust the drag mechanism until the drag slips at the correct setting for the line strength you are using. On a spinning reel, the drag mechanism is usually on the top of the reel (front drag), though it can sometimes be found on the back end of the reel (rear drag).

How To Switch The Handle: Right- or Left-Hand Retrieve

  1. Remove the dust cap and keep it handy. Hold the reel firmly in the palm of your hand. Do not let the spool spin.
  2. Hold the handle near the base of the reel and quickly snap the handle backward (toward the rear of the reel). Not all models have left hand thread. If your handle does not loosen, turn the opposite way.
  3. Unscrew the handle until it comes off. Place the dust cap over the opening.
  4. Screw the handle into the other side of the reel.
  5. On models with a folding handle, to collapse the handle for storage, loosen it just enough for the handle to hang down but still remain attached to the reel.

Operation: Casting Your Reel

  1. Assemble your outfit. You can do this by tying on a practice plug, so you avoid hooking anything.
  2. Hold the rod with your dominant hand. The reel should be below the rod. The foot of the reel is placed between your ring finger and middle finger. Although, if you have a more comfortable placement for it, that's fine.
  3. Pull out or reel in your line until you have at least 5 inches of hanging line out of the top. Turn the handle of your reel slowly until the line roller is directly underneath your index finger.
  4. Hold the line against your rod with the crook of your index finger.
  5. Open the bail with your other hand.
  6. In a smooth motion, bring the rod up vertically.
  7. Allow it to flex (where the tip bends backward behind you, also referred to as "loading" the rod), and without pausing, push the rod forward. The movement should be happening at your elbow and wrist, not shoulder.
  8. When the rod tip is halfway to your target, relinquish your index finger from the line.
  9. Point the rod at your target.
  10. If you happen to observe the plug went directly up, you released the line too early.
  11. If the plug crashed straight toward the ground, you released the line too late.
  12. Close the bail with your opposite hand.

Maintenance

Reel Care And Lubrication

Your new reel is designed to provide years of dependable service. But like any other precision machine, periodic cleaning and maintenance is required for continued peak performance.

Reels made today require both a lightweight oil and grease. Oil and grease should be used sparingly; too much can have a negative impact on reel performance. There are lightweight oils and greases made specifically for fishing reels, that can be found on KastKing.com.

Keep in mind, oils should be used to lubricate any moving part on the reel, e.g., ball bearings, bushings, handle joints, bail springs, etc. Grease should be used to lubricate the main drive gear and pinion gear.

It's recommended not to use any multipurpose oils when servicing your reel. Many of these oils have properties that attract dust and dirt to internal parts. This may cause excessive wear and reduce the life of the reel.

After each trip, the reel should be checked for dirt and sand. If it has been exposed to saltwater, the spool should be removed and the entire reel rinsed in freshwater. Dry with a soft cloth and lubricate the reel as described above.

How To Clean And Lubricate Spinning Reels

Things You'll Need:

  • Reel Lubricating Oil & Grease
  • Spinning Reel
  • Clean Cloth
  • Soapy Water
  • Clean Water
  • Small Or Medium Bristle Brush
  1. Use a clean cloth and soapy water to clean the reel, removing any excess dirt or debris. Particularly pay attention to the spool when cleaning. Wipe the reel with water only to remove any soap and remaining dirt and then wipe dry.
  2. Remove the handle of the reel. Unscrew the handle by turning or loosening a retaining screw on the opposite side. With the handle removed, clean inside the body of the reel to remove old lubricants and any debris. Use a small amount of lubricant inside the reel and reattach the handle.
  3. Open the bail of the reel and use the small brush to remove any debris or dirt from the bail mechanism. Also pay attention to the line roller, because pond scum and algae will accumulate here.
  4. Remove the spool from the reel by either removing a retaining knob at the front of the spool or by simply turning the spool counter-clockwise. Thoroughly wipe down the spool paying special attention to the inside front of the spool where water debris will accumulate.
  5. Use the small brush to clean any mechanism exposed with the spool removed. Apply a light coating of lubricant and reattach the spool.
  6. Wipe down the entire reel with a thin coating of reel oil. This will help provide a layer of protection to the reel and that will help with future cleanings.

How To Remove Spool

Hold the reel in your hands with the drag knob facing you. Place your fingertips around the edge of the reel case and place your thumbs in the ports against the spool. Push the spool away from the case. Withdraw the spool from the body.

Specifications

Detailed specifications table for KastKing Sharky III reel sizes 1000-5000, including gear ratio, frame, ball bearings, max drag, mono line capacity, braid line capacity, weight, and IPT.

Detailed specifications table for KastKing Sharky III reel sizes 1000-5000.

General Product Specifications
AttributeValue
Brand Namekastking
Model NumberSharky III Spinning Reel
MaterialAluminum
Weight0.6 kg
Gear Ratio5.2:1
Baits TypeFake Bait
Fishing Reels TypePre-Loading Spinning Wheel
Fishing Methodspinning
PositionOcean Boat Fishing, Ocean Rock Fishing, Ocean Beach Fishing, Lake, River, Reservoir Pond, Stream
OriginMainland China
Target SpeciesBass, Pike, Carp
Drag Power Range15-18 KG (33-39.5 LBs)
Ball Bearings10+1
Weight Range260-299g
Line Capacity (1000 Series)0.205mm/180m
Line Capacity (2000 Series)0.205mm/200m
Line Capacity (3000 Series)0.235mm/200m
Line Capacity (4000 Series)0.260mm/200m
Line Capacity (5000 Series)0.285mm/200m
Comparison of Sharky III Long Cast vs Sharky III rotor nuts and friction areas.

Comparison of Sharky III Long Cast vs Sharky III rotor nuts and friction areas.

Patent Pending Large Diameter Spool for increased casting distance.

Patent Pending Large Diameter Spool for increased casting distance.

Comparison of Super Lightweight Carbon Body and Rotor (Sharky III Long Cast) vs. Reinforced Graphite Body and Rotor (Sharky III).

Comparison of Super Lightweight Carbon Body and Rotor (Sharky III Long Cast) vs. Reinforced Graphite Body and Rotor (Sharky III).

Troubleshooting

  • Crunching/Noise During Rotation: If you experience a crunching or unusual noise during rotation, it could indicate an issue with the internal gears or bearings. It is recommended to disassemble, clean, and re-lubricate the reel. If the issue persists, contact KastKing customer service.
  • Uneven Line Winding: If the line is not spooling evenly, it might be due to incorrect line tension during spooling or issues with the oscillation system. Ensure you apply light, consistent pressure when spooling line. Some users adjust the winding with shims under the spool.
  • Handle Play/Loose: The direct drive secure-fit handle is designed to minimize play. If you notice excessive looseness, ensure the handle is screwed in tightly. If the issue is with the folding mechanism, ensure it is properly tightened for use.
  • Line Roller Issues: Some users have noted that the line roller might come with a bushing instead of a bearing in certain batches. If you experience friction or poor performance from the line roller, consider replacing the bushing with a suitable bearing (e.g., 4x7x2.5mm). Ensure regular cleaning and lubrication of the line roller to prevent scum and algae buildup.
  • Bail Arm Mechanism: If the bail arm is not flipping smoothly or has a clicking sound, inspect the bail mechanism for debris or misalignment. Clean and lubricate the pivot points.

User Tips

  • Handle Reversibility: The handle can be easily switched for right-hand or left-hand retrieve by following the instructions in the Setup section.
  • Saltwater Use: While the Sharky III features the K.I.S.S. (KastKing Intrusion Shield System) for water resistance, it is highly recommended to rinse the entire reel thoroughly with fresh water after each use in saltwater. Dry it with a soft cloth and apply lubrication as per the maintenance guide to prevent corrosion.
  • Line Roller Upgrade: For even smoother operation, some experienced users choose to replace the bushing in the line roller with a small ball bearing. This can enhance performance and longevity, especially under heavy use.
  • Initial Inspection: Upon receiving your reel, it's a good practice to perform an initial inspection, and if comfortable, a light disassembly, cleaning, and re-lubrication to ensure all components are optimally set for your first fishing trip.
  • Spool Capacity Matching: When choosing a reel size, consider your fishing style and target species. For light spinning (e.g., 3-15g test), a 2000 or 3000 series is often suitable. For heavier applications (e.g., 15-56g test), a 4000 series might be more appropriate.
  • Avoid Overfilling: Always ensure your spool is filled to about 1/8th inch from the rim. Overfilling or underfilling can lead to tangles and casting issues.

Warranty and Support

Warranty

KastKing warrants to the original purchaser that any KastKing products are free from defects in materials or workmanship for at least a period of one (1) year from the date of purchase. KastKing is not responsible for normal wear and tear, for products used commercially, or for failures caused by accidents, abuse, alteration, modification, misuse, or improper care. There are no other expressed warranties beyond the terms of this limited warranty. In no event shall any implied warranties, including merchantability and fitness for a particular purpose, extend beyond the duration of the expressed warranty contained herein. In no event shall KastKing be liable for incidental or consequential damages.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion of limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights and you may have other rights which vary from state to state.

For Warranty Claims, please call 516-243-8791 before you ship the damaged product back to KastKing, 425 Oak St, Unit A, Garden City, NY 11530.

Beyond-Warranty Support

KastKing offers beyond-warranty support to ensure full confidence and total peace of mind for its customers. This includes:

  • Requesting fishing reel or rod parts due to loss or user error damage.
  • Requesting assistance in the set up and use of rods/reel/combos.
  • Continuing to receive support even after warranty expires.
  • Learning tricks about fishing gear maintenance.
  • Receiving offers only available to current customers.

To enjoy the beyond-warranty support, please sign up at: www.kastking.com/warranty

Or email your order number and phone number to: beyond-warranty@kastking.com

For general inquiries, you may also call: 1-855-830-7430.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.