RAYKUBE R-W39 Electronic Door Lock

1. Product Overview

The RAYKUBE R-W39 is an intelligent, keyless electronic door lock designed for enhanced home security. It features wireless remote control operation, a robust stainless steel and metal body, and a double-battery power supply system to ensure continuous functionality. This lock is suitable for indoor use on various door types including wood, glass, and metal.

2. Package Contents

The contents of your package may vary depending on the kit purchased. Please refer to the list below and the accessory table for details.

• Kit 1: 1 x R-W39 Lock; 2 x Remote Control; 1 x Installation Accessory Set; 1 x English User Manual.
• Kit 2: 1 x R-W39 Lock; 4 x Remote Control; 1 x Installation Accessory Set; 1 x English User Manual.
• Kit 3: 1 x R-W39 Lock; 4 x Remote Control; 1 x Password Keypad; 1 x Installation Accessory Set; 1 x English User Manual.
• Kit 4: 1 x R-W39 Lock; 2 x Remote Control; 1 x Door Sensor; 1 x Installation Accessory Set; 1 x English User Manual.
• Kit 5: 1 x R-W39 Lock; 2 x Remote Control; 1 x Door Sensor; 1 x Password Keypad; 1 x Installation Accessory Set; 1 x English User Manual.

3. Setup and Installation

The R-W39 lock is designed for easy, wire-free installation on various door types. It must be installed on the interior side of the door.

3.1 Lock Unit Dimensions

3.2 Accessory Dimensions

• Remote Control (R-RM1): 60mm x 33mm.
• Password Keypad (R-K13): 86mm x 42mm x 14mm.
• Door Sensor (R-DS1): Dimensions not explicitly stated but shown in images.

3.3 Installation Steps

1. Prepare the Door: Ensure the door surface is clean and suitable for mounting. The lock is designed for most door types, including in-opening and out-opening doors.
2. Position the Lock: Use the provided installation template to mark the drilling points for the lock body and the integrated lock ears/strike plates.
3. Drill Holes: Carefully drill the necessary holes as marked.
4. Mount the Lock Body: Secure the main lock unit to the door using the provided screws and mounting plate.
5. Install Strike Plates: Attach the appropriate integrated lock ears/strike plates to the door frame, aligning them with the lock pins.
6. Install Batteries: Insert the required batteries into the main lock unit and any accessories (remote, keypad, door sensor).
7. Pair Remote Controls/Keypad/Door Sensor: Follow the pairing instructions in the operating section to connect your accessories to the lock.

4. Operation

4.1 Main Lock Unit

• Manual Operation: The lock features a manual rotate knob for locking/unlocking from the inside.
• Emergency Button (Keeping Open): If you wish to keep the door unlocked, press this button.

4.2 Remote Control (R-RM1)

• Locked Button: Press to lock the door.
• Unlock Button (A): Press to unlock the door (normal working mode).
• Unlock Button (B): This button is typically not used for normal operation.

4.3 Wireless Password Keypad (R-K13)

The keypad allows you to lock or unlock the door using a 1-6 digit password. A video guide for setting the password will be provided.

4.4 Wireless Door Sensor (R-DS1)

When the door sensor is installed and the door is closed, it transmits a locked signal to the lock, enabling automatic locking functionality.

4.5 Pairing Accessories

To pair a remote control, keypad, or door sensor with the lock:

1. Open the battery cover of the main lock unit.
2. Locate the 'Matching Remote Control Button' (often labeled A for normal working code-matching and B for backup code-matching).
3. Press the matching button on the lock unit.
4. Activate the accessory (e.g., press a button on the remote, enter a code on the keypad, or trigger the door sensor).
5. The lock will confirm successful pairing.

If a remote control is lost, reset the lock to delete all registered remote controls and then re-pair the remaining ones.

5. Power Supply and Maintenance

5.1 Double Power Supply System

The R-W39 lock features a dual power supply system:

• Routine Power Supply (A Power): Uses 4 x AA 1.5V dry batteries. Provides over 10 months of battery life with 20 uses per day. Includes a low power warning voice (bi bi bi...).
• Backup Power Supply (B Power): Uses 1 x 23A 12V dry battery. Can standby for over 1 year. This system needs to be activated by shocking the door.

5.2 Activating Backup Power

If the routine AA batteries are completely exhausted, you can activate the backup power supply:

1. Knock on the door 2-3 times to shock the lock. This will activate the backup power supply.
2. The lock will emit a "bi" sound.
3. Long press the unlock button on your remote control to unlock the door.

5.3 Battery Replacement

• Main Lock Unit: Replace 4 x AA 1.5V batteries for routine power and 1 x 23A 12V battery for backup power when indicated by low power warnings or during routine maintenance.
• Remote Control (R-RM1): Replace with 1 x CR2032 battery. To replace, use a small screwdriver to gently pry open the remote casing.
• Wireless Password Keypad (R-K13): Uses 1 x 23A 12V battery.
• Wireless Door Sensor (R-DS1): Uses 2 x AAA 1.5V batteries.

5.4 General Maintenance

• The R-W39 lock is designed for indoor use only. Avoid exposure to outdoor elements, moisture, or extreme temperatures.
• Keep the lock body and accessories clean and free from dust.
• Regularly check battery levels and replace them as needed to ensure optimal performance.

6. Troubleshooting

• Lock not responding to remote/keypad:
  • Check if the batteries in the lock unit and the remote/keypad are charged.
  • Ensure the remote/keypad is within the working distance (1-16M).
  • Re-pair the remote/keypad with the lock.
• Lost Remote Control:
  • Reset the lock to delete all registered remote controls.
  • Re-pair your remaining remote controls with the lock. This invalidates the lost remote, preventing unauthorized access.
• Main batteries exhausted, unable to unlock:
  • Activate the backup power supply by knocking on the door 2-3 times until the lock beeps.
  • Use the remote control to unlock the door.
• Automatic locking not working with door sensor:
  • Ensure the door sensor batteries are charged.
  • Verify the door sensor is correctly installed and aligned with the magnet when the door is closed.
  • Re-pair the door sensor with the lock.

7. Specifications

8. User Tips

• Not Internet Dependent: The RAYKUBE R-W39 lock operates via wireless radio frequency (433MHz) with its remote controls, keypad, and door sensor. It does not rely on an internet connection for its core locking/unlocking functions, ensuring reliability even during network outages.
• Keypad as Backup: The wireless password keypad (R-K13) can be a convenient backup if you misplace your remote control. Since the password is known only to you, it can be safely placed outside your door.
• Security of Rolling Code: The lock uses KeeLog running code and anti-scanning code technologies. Each remote transmission sends a 60-bit code that becomes invalid after one use, making it difficult to copy or decipher.

9. Warranty and Support

The RAYKUBE R-W39 Electronic Door Lock comes with CE and RoHS certifications, ensuring compliance with European safety and environmental standards.

For technical support or warranty inquiries, please contact the RAYKUBE Official Store directly. You can find their contact information on their official store page: RAYKUBE Official Store.