Eachine ROTG02 UVC OTG 5.8G 150CH Audio FPV Receiver User Manual
Model: ROTG02
1. Introduction
The Eachine ROTG02 is a UVC OTG 5.8G 150CH Audio FPV Receiver designed to provide a live video feed from your FPV drone or other 5.8GHz video transmitters directly to your Android mobile phone or tablet. Featuring dual receivers with automatic switching for the best signal, it offers a low-latency solution for FPV enthusiasts. This manual will guide you through the setup, operation, and maintenance of your ROTG02 receiver.

Figure 1: Eachine ROTG02 FPV Receiver (Black and White versions)
2. Package Contents
Please check the package for the following items:
- 1 x Eachine ROTG02 FPV Receiver Unit (Black or White)
- 2 x 5.8G Antennas (SMA connector type)
- 2 x USB Connection Cables (for Android devices)

Figure 2: ROTG02 Package Contents
3. Setup Guide
3.1 Compatibility Requirements
- Operating System: Android (Not compatible with Apple iOS devices)
- OTG Support: Your Android device must support USB On-The-Go (OTG) functionality.
- UVC Support: Your Android device must support UVC (USB Video Class) for video input.
3.2 Hardware Connection
- Attach Antennas: Screw the two provided 5.8G antennas onto the SMA connectors on the ROTG02 receiver unit. Ensure they are securely fastened.
- Connect to Android Device: Use one of the supplied USB cables to connect the ROTG02 receiver to your Android smartphone or tablet. The receiver typically uses a Micro USB or USB-C connector, and the cable will adapt to your phone's port.

Figure 3: White ROTG02 connected to an Android smartphone

Figure 4: Black ROTG02 connected to an Android smartphone
3.3 Software Installation
Before operating the receiver, you will need to install a compatible FPV application on your Android device. Search for "FPV Viewer" or "UVC FPV" apps on the Google Play Store. Popular choices include:
- FPV Viewer
- Go FPV
- Eachine FPV (if available)
Follow the in-app instructions for setup and channel scanning.
4. Operating Instructions
- Power On FPV Transmitter: Ensure your FPV drone or video transmitter is powered on and transmitting a 5.8G video signal.
- Launch FPV App: Open the FPV viewing application on your Android device.
- Scan for Channels: Within the app, initiate a channel scan to find the frequency being used by your FPV transmitter. The ROTG02 supports 150 channels across the 5.8G band.
- View Live Feed: Once the correct channel is found, the live FPV video feed should appear on your Android device's screen. The ROTG02 features dual receivers that automatically switch to the strongest signal for improved reception.
- Audio Output: The ROTG02 is an audio FPV receiver. If your FPV camera/transmitter sends audio, it will be passed through to your Android device. Plugging headphones into your phone may allow for audio monitoring and potentially recording via the FPV app.
- Analog Video Output: The receiver also features a separate port (not USB) that provides an analog video signal and 5V power output. This can be used to connect to an external analog monitor if desired.
5. Maintenance
- Cleaning: Gently wipe the receiver unit with a dry, soft cloth. Avoid using liquid cleaners or solvents.
- Storage: Store the receiver in a dry, cool place away from direct sunlight and extreme temperatures.
- Antennas: Handle antennas with care to prevent bending or damage. Ensure they are securely attached during use.
6. Troubleshooting
- No Video Feed:
- Ensure your Android device supports OTG and UVC.
- Verify the FPV app is correctly installed and configured.
- Check that the FPV transmitter is powered on and transmitting.
- Rescan for channels within the FPV app.
- Ensure antennas are securely connected to the ROTG02.
- Poor Video Quality/Interference:
- Ensure the FPV transmitter and receiver are on the same channel.
- Check for obstructions between the transmitter and receiver.
- Move away from sources of electromagnetic interference (e.g., Wi-Fi routers, other 5.8G devices).
- The dual receiver system should automatically select the best signal, but severe interference can still affect quality.
- Receiver Not Recognized by Phone:
- Confirm your phone's OTG function is enabled (some phones require manual activation in settings).
- Try a different USB cable.
- Restart your Android device.
- Not Working with iPhone/iPad:
- The Eachine ROTG02 is designed exclusively for Android devices and is not compatible with Apple iOS products.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | Eachine ROTG02 |
| Size | 61*41*11 mm |
| Material | Composite Material |
| Frequency | 5.8G (150 Channels) |
| Receiver Type | Dual Receiver with Auto-Switching |
| Output | UVC (USB Video Class) for Android, Analog Video Output (5V power) |
| Power Source | No Battery, No Charger/Adapter (Powered via USB from Android device) |
| Batteries Included | No |
| Technical Parameters | Value 10 |
| Recommended Age | 14+ years |
| Use | Vehicles & Remote Control Toys |
| Origin | Mainland China |
| Package Weight | 0.05 kg |
| Package Dimensions | 3 x 6 x 9 cm (approximate) |
8. User Tips
- Verify OTG: Always confirm your Android device's OTG compatibility before purchase or use. Some older or budget phones may lack this feature.
- App Choice: Experiment with different FPV viewer apps from the Google Play Store to find one that offers the best performance and features for your device.
- Antenna Orientation: For optimal signal reception, try adjusting the orientation of the receiver's antennas.
- Low Latency: The ROTG02 is known for its low latency, providing a near-instantaneous video return, which is crucial for responsive FPV flying.
- Analog Output: Don't forget the analog video output port if you prefer to use a dedicated FPV monitor instead of your phone.
9. Warranty and Support
For any issues, questions, or technical support regarding your Eachine ROTG02 FPV Receiver, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.