1. Product Overview
The Dooya DC1653 is a 15-channel RF433 emitter remote control designed for seamless operation of Dooya RF433 tubular motors, commonly used in automated curtains and blinds. This wall-mounted switch allows for individual control of up to 15 motors or group control of all paired motors simultaneously.


2. Specifications
| Feature | Detail |
|---|---|
| Model Number | Dooya DC1653 |
| Item Type | 15 Channel RF433 Emitter Remote Controller |
| Compatibility | Dooya RF433 motors (e.g., KT320E, DT52E, DT360, DT KT82TN TV). Not compatible with Dooya V1 motors. |
| Remote Control Distance | 30 meters through walls, 200 meters in open air |
| Battery | CR2430 (3V) - Not included |
| Frequency | 433.05-434.79MHz |
| Installation Method | Self-contained (wall-mounted) |
| Dimensions (Remote) | 86mm x 86mm x 12mm |
| Dimensions (Back Plate) | 84.7mm x 84.7mm x 7mm |
| Certification | CE |
| Origin | Mainland China |

3. Setup and Installation
3.1. Battery Installation
The Dooya DC1653 remote control requires one CR2430 (3V) button battery, which is not included. To install the battery:
- Carefully open the back cover of the remote control.
- Insert the CR2430 battery, ensuring correct polarity (+/-).
- Close the back cover securely.

3.2. Physical Installation (Wall Mounting)
The remote control comes with a back plate and mounting hardware for wall installation.
- Choose a suitable location on your wall for the remote control.
- Use the back plate as a template to mark the drilling points.
- Drill holes and insert the provided wall anchors.
- Secure the back plate to the wall using the screws.
- Attach the remote control to the mounted back plate.

4. Operating Instructions
4.1. Pairing with Dooya Motors
To control your Dooya RF433 motor, you must first pair the remote control with the motor. Ensure the motor is powered on before starting the pairing process.
- Power on the motor: Connect your Dooya tubular motor to power. You should hear a beep and the motor will briefly jog.
- Select Channel 1 on Remote: Use the '+' or '-' buttons on the remote to ensure the screen displays '1' (for the first individual channel).
- Activate Motor Pairing Mode: Press the black programming button on the motor rail. As soon as the motor's indicator light illuminates, release your finger.
- Initiate Pairing on Remote: Within a few seconds, simultaneously press the 'Up' button and the 'Pause/Stop' button on the remote control twice.
- Confirm Pairing: The motor will jog again, indicating successful pairing.

Watch this video for a demonstration of the pairing process:
4.2. Basic Controls
The remote control features intuitive buttons for motor operation:
- Up Button (^): Moves the curtain/blind upwards.
- Down Button (v): Moves the curtain/blind downwards.
- Pause/Stop Button (o): Stops the curtain/blind at its current position.
4.3. Channel Selection
The DC1653 remote control supports 15 individual channels (1-15) and one group control channel (0).
- Use the '+' button to increase the channel number.
- Use the '-' button to decrease the channel number.
- The current channel number is displayed on the remote's screen.
4.4. Group Control
To control all paired motors simultaneously, select channel '0' on the remote control. When the screen displays '0', any command (Up, Down, Stop) will be sent to all motors paired with any of the 15 channels.
5. Maintenance
- Battery Replacement: Replace the CR2430 battery when the remote's performance degrades or the screen display becomes dim. Follow the battery installation steps in Section 3.1.
- Cleaning: Wipe the remote control with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
6. Troubleshooting
- Motor not responding:
- Check if the remote control's battery needs replacement.
- Ensure the motor is powered on.
- Verify that the correct channel is selected on the remote.
- Attempt to re-pair the remote control with the motor following the steps in Section 4.1.
- Remote control range issues:
- Ensure there are no significant obstructions (e.g., thick walls, large metal objects) between the remote and the motor.
- Check for potential sources of RF interference.
- The maximum range is 30m through walls and 200m in open air.
- Setting Upper and Lower Limits: The setting of upper and lower limits for the curtain/blind movement is typically a function of the Dooya motor itself, not the remote control. Please refer to the specific user manual for your Dooya tubular motor model for instructions on how to set these limits.
7. User Tips
- When pairing multiple motors, it is recommended to pair them one by one on different channels (1-15) first, then use channel '0' for group control.
- Always ensure the motor is powered on and in pairing mode before attempting to pair the remote.
- Keep the remote control in a dry environment and avoid exposure to extreme temperatures.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.