1. Introduction
The Eachine EV100 FPV Goggles are designed to provide an immersive First Person View experience for remote control vehicles, particularly drones and helicopters. Featuring a 720*540 resolution display, 5.8G 72-channel receiver, and dual antennas, these goggles offer stable video reception and adjustable viewing parameters for an optimal flying experience.

Figure 1.1: Eachine EV100 FPV Goggles (Black)
2. Safety Information
- Battery Charging: Do NOT use a balance plug to charge the battery. Use only the designated 18650 battery case and a compatible USB charging cable (not included).
- Low Battery Alert: The goggles will provide a low battery alert when the voltage drops to 6.8V. The battery indicator will continue to alert until the battery is removed or the goggles are powered off.
- Eye Safety: Avoid prolonged direct exposure to the screen. Adjust focal length and IPD carefully to prevent eye strain.
3. Package Contents
Please check the package for the following items:
- 1 x Eachine EV100 5.8G 72CH FPV Goggles
- 1 x 18650 Battery Case
- 2 x RP-SMA 3dBi Antenna
- 1 x User Manual
4. Product Overview
4.1 Features
- Adjustable focal length (for myopia under 400 degrees and hyperopia 150 degrees)
- Adjustable Interpupillary Distance (IPD) 58-68mm
- AV Input and Output support (audio available in AV-IN mode)
- Dual Antennas for enhanced reception and stable performance
- Auto Search function for frequencies
- Multiple Racing Modes (4/6/8 pilots) with 60-80MHz interval to decrease interference
- Debug Mode (requires compatible VTX with pitmode and extra frequency 5300MHz)
- Integrated Fan to defog glasses for clear vision
- Low battery alert system
- Support for external HDMI to AV module
- Support for external DVR module
4.2 Component Diagram

Figure 4.1: Eachine EV100 FPV Goggles Labeled Diagram
- Bottom short press to change channel, press 3s to change band.
- Grid - fan on/off. Short press to turn on/off USB.
- Five direction button:
- Up/down: brightness adjustment
- Left/right: contrast adjustment
- Middle button:
- Short press: mode button
- Long press: debug mode (1500MHz)
- Long press until third beep: AV IN (RX OFF)
- Auto search button:
- Short press: auto search all frequencies and select a channel with the strongest signal.
- Long press: switch to racing mode (4/6/8 pilots) or normal mode.
- Antenna: Dual Antenna (3dBi)
- Battery Indicator (4 LEDs)
- Switch: To check battery level.
- Battery input: 7.4V/1000mAh
- Headphone jack: 3.5mm
- USB interface: for firmware upgrading and alternative power supply.
- Elastic cord: adjustable.
- RP-SMA male antenna connector.
- AV interface: 3.5MM INPUT & OUTPUT (CVBS). Supports external HDMI or AV input, supports external DVR to AV input.
- Focal length adjustment: under 400 degree myopia and hyperopia 150 degrees.
- IPD (Interpupillary Distance) adjustment: 58-68mm.
- Switch: Turn on/off fan.
5. Setup
5.1 Battery Installation
The goggles use an 18650 battery case. Insert a fully charged 18650 battery into the battery case. Connect the battery case to the goggles' power input port (labeled 8 in Figure 4.1).
5.2 Antenna Attachment
Screw the two RP-SMA 3dBi antennas onto the RP-SMA connectors (labeled 11 in Figure 4.1) on top of the goggles. Ensure they are securely fastened.
5.3 Powering On
Press and hold the power button (part of the five-direction button, labeled 3 in Figure 4.1) to turn on the goggles. The battery indicator LEDs (labeled 6) will light up to show the current battery level.
5.4 Adjusting Focal Length and IPD
Use the focal length adjustment dials (labeled 13 in Figure 4.1) to achieve a clear image. This compensates for myopia (up to 400 degrees) and hyperopia (up to 150 degrees).
Adjust the IPD (Interpupillary Distance) sliders (labeled 14 in Figure 4.1) to match your eye spacing (58-68mm) for a comfortable and single image view.

Figure 5.1: IPD Adjustment
6. Operating Instructions
6.1 Channel and Band Selection
- Change Channel: Short press the bottom button (labeled 1 in Figure 4.1).
- Change Band: Press and hold the bottom button for 3 seconds (labeled 1 in Figure 4.1).
6.2 Auto Search
Short press the Auto Search button (labeled 4 in Figure 4.1) to automatically scan all available frequencies and select the channel with the strongest signal.
6.3 Brightness and Contrast Adjustment
Use the five-direction button (labeled 3 in Figure 4.1):
- Brightness: Press Up or Down.
- Contrast: Press Left or Right.
6.4 Racing Mode
Long press the Auto Search button (labeled 4 in Figure 4.1) to switch between normal mode and racing mode. Racing mode is optimized for 4/6/8 pilots, utilizing 60-80MHz intervals between adjacent channels to minimize interference.
6.5 Debug Mode
Long press the middle button of the five-direction button (labeled 3 in Figure 4.1) to enter Debug Mode. This mode requires a corresponding Video Transmitter (VTX) that supports pitmode and an extra frequency of 5300MHz.
6.6 Fan Operation
The integrated fan helps defog the lenses. Use the fan switch (labeled 15 in Figure 4.1) to turn the fan on or off.
6.7 AV IN/OUT Usage
The goggles support AV IN/OUT via a 3.5mm interface (labeled 12 in Figure 4.1). This allows connection to external devices like DVRs, PCs, or TVs. Audio is available when using AV-IN mode.

Figure 6.1: AV IN/OUT Connectivity
6.8 Firmware Upgrading
The goggles support firmware upgrading via the USB interface (labeled 10 in Figure 4.1). Connect the goggles to a computer using a USB cable (not included) and follow the instructions provided with the firmware update package.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the goggle lenses and exterior. Avoid abrasive materials or harsh chemicals.
- Sponge Replacement: The goggles feature an easy-to-change sponge faceplate. Replace it as needed for hygiene and comfort.
- Battery Care: Always use the provided 18650 battery case. Do not attempt to charge the battery directly via a balance plug. Store batteries in a cool, dry place.
- Storage: When not in use, store the goggles in a protective case to prevent damage to the lenses and electronics.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No audio in FPV mode | Built-in receiver does not support audio. | Audio is only available when using AV-IN mode with an external video source that provides audio. |
| Blurred or double image | Incorrect focal length or IPD adjustment. | Carefully adjust the focal length dials and IPD sliders until a clear, single image is achieved. This may require fine-tuning. |
| Poor signal reception or interference | Weak signal, environmental interference, or suboptimal antenna placement. | Ensure antennas are securely attached. Try using the Auto Search function. Consider upgrading to higher gain antennas for improved range and clarity. Avoid flying in areas with high electromagnetic interference. |
| Goggles not powering on | Battery depleted or incorrectly installed. | Check battery level and ensure it is properly inserted into the 18650 battery case. Recharge or replace the battery if necessary. |
9. Specifications
| Parameter | Value |
|---|---|
| Brand Name | Eachine |
| Item Name | EV100 |
| Size | 165mm*76mm*30mm |
| Weight | 221g (with battery 57g and antenna 13g) |
| Resolution | 720*540 |
| FOV (Field of View) | 28° diagonal |
| IPD (Interpupillary Distance) | 58-68mm |
| Aspect Ratio | 4:3 |
| Focal Length Adjusting | Under 400 degrees myopia and hyperopia 150 degrees |
| Frequency | 5.8G (5333Mhz-5945Mhz) |
| Sensitivity | <=-93dB |
| Antenna Impedance | 50Ω |
| Antenna Gain | 3dBi |
| Antenna Connector | RP-SMA |
| Video Format | NTSC/PAL |
| Power Input | 7.4V |
| Low Voltage Alert | 6.8V |
| Battery | 18650 battery case (battery not included) |
| Charging | USB Cable (not included) |
| Working Temperature | -10℃ to +40℃ |
10. User Tips
- For Beginners: These goggles are generally considered a good entry-level option for FPV flying.
- Image Clarity: Take your time to carefully adjust both the IPD and focal length. This is crucial for achieving a clear, single image and avoiding eye strain.
- Antenna Upgrade: While the stock antennas perform adequately, consider upgrading to higher-gain antennas (e.g., Pagoda or directional antennas) for potentially better reception and extended range, especially if you plan to fly at longer distances.
- Compatibility: These goggles are designed for FPV flying with drones that transmit a 5.8G analog video signal. They are generally not compatible with Wi-Fi-based FPV systems or digital FPV systems (like DJI Mavic series) without additional adapters or modules.
- Purpose: The EV100 goggles are for First Person View flying, not for virtual reality gaming or watching movies.
- DVR: If you wish to record your flights, an external DVR module is required as the goggles do not have built-in recording capabilities.
11. Warranty and Support
This item comes with a basic 1-month seller's warranty. If the item is found to be DOA (Dead on Arrival), buyers can return it within 14 days for a replacement. For defective items within the 1-month warranty period, a replacement will be offered (excluding extra charger and shipping fees).
For any questions or support, please contact customer service during working hours: 20:00-04:00 (PST). If a weekend or holiday, working time will be postponed to the next business day.

Figure 11.1: After-Sales Service Details