DOOYA DC305, DC306

Contents

DOOYA Remote Controller DC305, DC306 User Manual

5-Channel Remote Control for Blinds, Shades & Shutters

1. Introduction

This manual provides detailed instructions for the DOOYA DC305 and DC306 5-Channel Remote Controllers. These remote controls are designed for convenient operation of electric blinds, shades, and shutters, allowing you to manage multiple window coverings with ease. The DC305 and DC306 models offer five independent channels, enabling individual or group control of your devices.

DOOYA DC306 5-Channel Remote Controller
Figure 1: DOOYA DC306 Handheld 5-Channel Remote Controller. The image displays the white remote with five indicator lights and a central control button, along with Chinese text indicating its function.

2. Specifications

FeatureDetail
Model NumbersDC305, DC306 (MRB)
TypeRoller Shades Remote Controller
StyleRoman
MaterialMetal
Opening and Closing MethodUpper Open
Installation TypeExterior Installation, Side Installation, Built-in, Ceiling Installation
Applicable Window TypeFrench Window
FormatElectric
Pattern TypeHorizontal
TechnicsFlat Plate
Sheet SizeNarrow Blade
Hign-concerned ChemicalNone
CustomizationYes
OriginMainland China
Product Weight0.2 kg
Product Dimensions (L x W x H)110mm x 10mm x 10mm

3. Package Contents

Upon opening the package, please verify that all components are present and in good condition:

  • DOOYA DC305 or DC306 5-Channel Remote Controller
  • (Batteries may or may not be included, please check packaging)

4. Setup

4.1. Battery Installation

  1. Locate the battery compartment cover on the back of the remote controller.
  2. Slide or unclip the cover to open it.
  3. Insert the required batteries (typically AAA or CR2032, refer to the battery compartment for exact type and polarity). Ensure correct polarity (+/-).
  4. Replace the battery compartment cover securely.

4.2. Pairing with Devices

The pairing process may vary slightly depending on the specific motor or receiver unit you are connecting to. Generally, the steps involve:

  1. Ensure your electric blinds, shades, or shutters are powered on.
  2. Put the motor/receiver into pairing mode (often by pressing a small button on the motor head or receiver unit, or by cycling power). Refer to your motor's specific manual for exact instructions.
  3. On the DOOYA remote, select the desired channel (1-5) you wish to assign to the device.
  4. Press and hold the programming button on the remote (this might be a small recessed button, or a combination of main buttons).
  5. The motor should respond (e.g., jog slightly, beep) to confirm successful pairing.
  6. Repeat for additional devices on different channels, or for group control.
DOOYA Remote Controller with logo
Figure 2: Front view of the DOOYA Remote Controller, clearly showing the DOOYA brand logo at the bottom.

5. Operating Instructions

The DOOYA 5-Channel Remote Controller provides intuitive control over your connected devices.

5.1. Channel Selection

  • The remote features five indicator lights, each corresponding to a channel (1-5).
  • Press the 'Channel' button (usually located near the indicator lights) to cycle through the channels. The active channel's light will illuminate.
  • To control all paired devices simultaneously, select the 'All' channel (often indicated by all lights being off or a specific 'All' channel light).

5.2. Basic Control Functions

The central control button typically combines three functions:

  • UP / OPEN: Press the upper part of the central button to raise or open the blinds/shades.
  • DOWN / CLOSE: Press the lower part of the central button to lower or close the blinds/shades.
  • STOP / PAUSE: Press the center of the button to stop the blinds/shades at any desired position.

6. Maintenance

6.1. Cleaning

  • Wipe the remote controller with a soft, dry cloth.
  • Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or internal components.

6.2. Battery Replacement

  • Replace batteries when the remote's range decreases or if the indicator lights dim.
  • Follow the battery installation steps (Section 4.1) to replace old batteries with new ones of the correct type.
  • Dispose of old batteries responsibly according to local regulations.

7. Troubleshooting

  • Remote not responding: Check if the batteries are correctly installed and have sufficient charge. Replace if necessary. Ensure the remote is within range of the receiver.
  • Device not responding to a specific channel: Verify that the correct channel is selected on the remote. Re-pair the device to the desired channel if necessary.
  • Short operating range: Replace the batteries. Ensure there are no major obstructions between the remote and the receiver.
  • Interference: If you experience erratic behavior, check for other wireless devices operating on similar frequencies that might cause interference.

8. User Tips

  • Initial Testing: When first setting up, it can be helpful to 'just try' the buttons and observe the device's response to understand its basic functions before diving into complex programming.
  • Channel Assignment: Assign channels logically (e.g., Channel 1 for living room, Channel 2 for bedroom) to simplify daily operation.

9. Frequently Asked Questions (FAQ)

Q: Where can I use this remote controller?
A: It can be used in various installation scenes such as ceiling installation, built-in, side installation, and exterior installation for electric blinds, shades, and shutters.
Q: Where can the associated blinds/shades be placed?
A: They can be placed anywhere you want as long as they fit the window type and opening method, particularly suitable for French windows.
Q: What category does this product belong to?
A: It belongs to the Roller Shades category.
Q: What is the sheet size of the associated blinds/shades?
A: It is designed for narrow blade sheet sizes.
Q: Which rooms can it be used in?
A: It can be used in any room where French windows are installed.
Q: What is the model number of this item?
A: The model number of the product is MRB.
Q: Is the DC306 compatible with DC305A?
A: The DC305 and DC306 models are typically part of the same product line and are often compatible. However, for specific model variations like 'DC305A', it is recommended to verify compatibility with your motor's documentation or contact DOOYA support.
Q: What frequency does it operate on?
A: While many remote controllers for blinds operate on 433MHz, the exact frequency for this specific model is not explicitly stated in the provided specifications. Please refer to the product packaging or contact the manufacturer for precise frequency information if needed for compatibility.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.