Dooya DT82TV

Contents

Dooya DT82TV 5 Wires Curtain Motor User Manual

Model: DT82TV | Brand: Dooya

1. Introduction

The Dooya DT82TV is a versatile 5-wire curtain motor designed for both residential and commercial applications, including smart homes and hotel projects. It features advanced control options such as RS485 and dry contact, ensuring seamless integration into various automation systems. This motor is engineered for quiet operation, reliability, and ease of use, offering features like electronic stroke memory, resistance-and-stop function, and manual pull start.

Dooya DT82TV Motor with key features

Figure 1: Dooya DT82TV Motor highlighting Emitter Control, Resistance And Stop, Electronic Stroke Memory, and RS485 Dry Contact.

2. Important Safety Instructions

  • Read all instructions carefully before installation and use.
  • Installation must be performed by qualified personnel in accordance with local electrical codes.
  • Disconnect power before performing any wiring or maintenance.
  • Ensure all wiring connections are secure and properly insulated.
  • Do not allow children to play with the motor or controls. Keep remote controls out of reach of children.
  • Regularly inspect the motor and curtain system for any signs of wear, damage, or loose connections.
  • Do not expose the motor to moisture or extreme temperatures outside its operating range (-10°C to +55°C).
  • The motor is designed for a maximum continuous operation of 4 minutes. Allow it to cool down before restarting if it runs for an extended period.

3. Specifications

FeatureSpecification
Model NumberDT82TV (Rolling Code Version)
Rated Torque1.2 Nm
Rolling Speed14 cm/s
VoltageAC 100-240V
Wattage13W
Wireless Frequency433.925 MHz
Operating Temperature-10°C to +55°C
Max Run Time4 minutes
Noise Level≤ 30 dB
Load Capacity (Suggested)Up to 40kg (Max 50kg)
FunctionsTouch to go, Remote Emitter Control, Dry Input Contact, RS485, Resistance And Stop, Electronic Stroke Memory, Power Off Manual
Dimensions (Approx.)Length: 27.5 cm, Height: 7.2 cm, Depth: 6 cm
CertificationCE

4. Installation and Setup

4.1 Package Contents

Please check that all components are present:

  • Dooya DT82TV Curtain Motor
  • Mounting Brackets (if included with specific kit)
  • User Manual (this document)

4.2 Motor Dimensions

DT82TV Motor dimensions and component labels

Figure 2: DT82TV Motor dimensions (Length: 27.5 cm, Height: 7.2 cm, Depth: 6 cm) and interface components.

4.3 Wiring Instructions

The DT82TV motor uses a 5-core wire for power and control. Ensure power is OFF before wiring.

5-core wire identification for DT82TV motor

Figure 3: 5-core wire identification for DT82TV motor.

  • Black Line: Close Line (Curtain Close)
  • Brown Line: Fire Line (Live)
  • White/Grey Line: Open Line (Curtain Open)
  • Blue Line: Neutral Line
  • Yellow/Green Line: Ground Line

4.3.1 Connecting to a Smart Curtain Switch

Wiring diagram for connecting DT82TV to a smart curtain switch

Figure 4: Wiring diagram for connecting DT82TV to a smart curtain switch (110-240V Power).

4.3.2 Connecting to Strong Electric Switches (Wall Switches)

Important: The Neutral line and the Live line cannot be reversed. If spare wire is exposed, use a pressure line cap and ensure proper insulation.

Detailed wiring diagrams for strong electric switches

Figure 5: Wiring diagrams for Strong Electric Switch Modes and Hotel Mode.

  • Strong Electric Switch Mode 1 & 3:
    Blue = Neutral
    Black = Down (Close)
    White = Up (Open)
    Brown = Live
    Green/Yellow = Earth
  • Strong Electric Switch Hotel Mode:
    Blue = Neutral
    Black = NC (Not Connected / Reserved)
    White = Hotel Mode (Connects to Hotel Card System)
    Brown = Live
    Green/Yellow = Earth

4.3.3 RS485 and Dry Contact Interface

Motor interface details and wiring for RS485 and Dry Contact

Figure 6: Motor interface showing RS485 (A+, B-) and Dry Contact (Up, Down, Common) connections.

  • RS485 Interface: For smart home integration using RS485 protocol (A+ and B- lines).
  • Dry Contact Interface: For external low-voltage switch control (Up, Down, Common lines).
  • Setting Button: Used for pairing, limit setting, and factory reset.
  • LED Indicator Light: Provides feedback on motor status and operations (e.g., blinking during pairing).

5. Operating Instructions

5.1 Pairing Remote Control (Emitter)

To pair a remote control with the motor:

  1. Press and hold the Setting Button on the motor for 2 seconds. The LED indicator will blink once.
  2. Release the button.
  3. On your remote control, press the Open button (or desired channel button) for 1 second.
  4. Press the Open button again for 1 second. The motor will jog, indicating successful pairing.

5.2 Reversing Motor Direction

If the remote's 'Open' button closes the curtain and 'Close' button opens it, you need to reverse the motor direction:

  1. Press and hold the Setting Button on the motor for 5 seconds. The LED indicator will blink twice.
  2. Release the button.
  3. Press the Setting Button again for 2 seconds. The motor will jog, indicating direction reversal.

5.3 Setting Curtain Limits (Strokes)

This sets the fully open and fully closed positions of your curtain.

  1. Press the Setting Button for 1 second. The LED will blink once.
  2. Use the remote control to move the curtain to its desired fully open position.
  3. Press the Setting Button for 1 second. The LED will blink once.
  4. Use the remote control to move the curtain to its desired fully closed position.
  5. Press the Setting Button for 1 second. The motor will jog, indicating limits are set.

5.4 Manual Pull Start (Touch-to-Go)

The motor supports a manual pull start feature. Gently pull the curtain in the desired direction, and the motor will automatically take over to open or close it completely.

Illustration of manual pull start feature

Figure 7: Manual pull start allows operation even during power outages.

5.5 Resistance and Stop Function

If the curtain encounters an obstruction during operation, the motor will automatically stop to prevent damage.

5.6 RS485 Control

For advanced integration, the DT82TV motor can be controlled via RS485. Refer to your smart home system's documentation for specific RS485 commands and integration procedures.

5.6.1 RS485 Pairing

To pair the motor with an RS485 intelligent control terminal:

  1. Press and hold the Setting Button on the motor for 5 seconds. The LED indicator will blink twice.
  2. Release the button.
  3. Within 10 seconds, send the ID command from your RS485 intelligent control terminal. The motor will jog, indicating successful pairing.

5.7 Dry Contact Control

The motor can be controlled using external dry contact switches. Connect your switches to the Up, Down, and Common terminals as shown in Figure 6.

5.8 Product Overview Video

Video 1: Dooya DT82TV Curtain Motor Product Overview and Features.

6. Maintenance

  • Cleaning: Wipe the motor casing with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Inspection: Periodically check the curtain track for any obstructions and ensure the curtain moves freely. Inspect wiring for any signs of damage or wear.
  • Lubrication: The motor itself is maintenance-free. Do not attempt to lubricate internal components.

7. Troubleshooting

ProblemPossible CauseSolution
Motor does not operateNo power supplyCheck power connection and circuit breaker.
Remote control not workingRemote battery low/dead; Not pairedReplace remote battery; Re-pair remote control (Section 5.1).
Remote control direction reversedMotor direction set incorrectlyReverse motor direction (Section 5.2).
External switch direction reversedWiring error for external switchCheck and correct external switch wiring.
Curtain does not close completely in the middleRemote control direction incorrect; Stroke not set correctlyCheck remote direction, perform direction reversal if needed; Re-set curtain limits (Section 5.3).
Curtain always hits end or doesn't reach endStroke limits incorrectClear existing limits and re-set curtain limits (Section 5.3).
Manual pull start stuckLimit settings interferingRe-set curtain limits (Section 5.3).
Resistance stop not workingObstruction not detected or motor issueCheck for physical obstructions on the track; Contact support if issue persists.

7.1 Factory Reset

To restore the motor to factory default settings (clears all pairings and limits):

  1. Press and hold the Setting Button on the motor for 10 seconds. The LED indicator will blink five times.
  2. Release the button. The motor will jog, indicating a successful factory reset.

8. User Tips

  • For optimal performance and longevity, ensure your curtain track is clean and free of debris.
  • When integrating with smart home systems, always test each command (open, close, stop) individually after initial setup.
  • If using multiple motors in close proximity, ensure each remote control is paired to the correct motor to avoid unintended operations.

9. Warranty and Support

The Dooya DT82TV motor typically comes with a 1-year manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims.

For technical support, warranty service, or further inquiries, please contact your retailer or the manufacturer's customer service department.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.