RUNXIN DC2700, DC2702, DC2760

Contents

DOOYA Remote Controller User Manual

Models: DC2700, DC2702, DC2760

1. Introduction

This manual provides instructions for the setup, operation, and maintenance of your DOOYA Remote Controller models DC2700, DC2702, and DC2760. These remote controllers are designed for convenient control of motorized blinds, shades, and shutters.

2. Remote Controller Models

The DOOYA remote controllers are available in several models, each offering different functionalities:

  • DC2700: A single-channel remote controller for basic operation.
  • DC2702: A 15-channel remote controller, allowing control of up to 15 individual or groups of devices.
  • DC2760: Another multi-channel remote controller, similar to the DC2702, offering advanced control options.
DOOYA DC2700 single-channel remote controller
Figure 1: DOOYA DC2700 Single-Channel Remote
DOOYA DC2702 15-channel remote controller with digital display
Figure 2: DOOYA DC2702 15-Channel Remote
DOOYA DC2760 remote controller with digital display
Figure 3: DOOYA DC2760 Remote

3. Specifications

Feature Detail
Brand Name RUNXIN
Model Numbers DC2700, DC2702, DC2760
Wattage 3W
Origin Mainland China
Battery Included No
Battery Type CR2450 (Coin Cell)
High-concerned chemical None
Package Length 110 mm
Package Width 10 mm
Package Height 10 mm
Package Weight 0.2 kg

4. Setup Instructions

4.1 Battery Installation

  1. Locate the battery compartment on the back or side of the remote controller.
  2. Open the battery compartment cover.
  3. Insert one CR2450 coin cell battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery compartment cover securely.

4.2 Pairing with Motorized Devices

The pairing process for the remote controller with your motorized blinds, shades, or shutters typically involves specific steps that vary by the motor model. Please refer to the instruction manual provided with your motorized device for detailed pairing instructions. Generally, this process may involve:

  • Activating a pairing mode on the motor.
  • Pressing a specific button sequence on the remote controller.

Ensure your remote is within range of the device during the pairing process.

5. Operating Instructions

Once paired, your DOOYA remote controller allows for easy operation of your motorized devices.

5.1 Basic Controls (All Models)

  • Up (▲): Press to raise the blinds/shades or open the shutters.
  • Down (▼): Press to lower the blinds/shades or close the shutters.
  • Stop (-): Press to stop the movement of the blinds/shades/shutters at any desired position.

5.2 Multi-Channel Operation (DC2702, DC2760)

For multi-channel remotes, you can select specific channels to control individual devices or groups:

  • Channel Selection: Use the channel selection buttons (often labeled with arrows or numbers) to cycle through available channels. The current channel number is typically displayed on the remote's screen.
  • Group Control: Some models allow programming multiple devices to a single channel for simultaneous control. Refer to your motor's manual for group programming.

6. Maintenance

6.1 Cleaning

To clean your remote controller, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these may damage the surface or internal components.

6.2 Battery Replacement

When the remote's range decreases or it becomes unresponsive, it's likely time to replace the battery. Follow the battery installation steps in Section 4.1 to replace the CR2450 coin cell battery.

7. Troubleshooting

  • Remote not responding:
    • Check if the battery is correctly installed and has sufficient charge. Replace the CR2450 battery if necessary.
    • Ensure the remote is within the operating range of the motorized device.
    • Verify that the remote is properly paired with the device. If not, re-pair according to your motor's instructions.
  • Device not moving as expected:
    • For multi-channel remotes, ensure you have selected the correct channel for the device you wish to control.
    • Check for any obstructions preventing the movement of the blinds/shades/shutters.
  • Compatibility issues:
    • Ensure your remote controller model is compatible with your specific motorized device. For example, some users have confirmed compatibility with motors like the FUZZI MODELO FM45E-20. Always check your motor's specifications.

8. User Tips

  • Battery Type: The remote controller uses a CR2450 coin cell battery. Keep a spare on hand for quick replacement.
  • Compatibility Check: Before attempting to pair, always confirm that your specific DOOYA remote model is compatible with your motorized blinds or shades. Refer to the documentation of your motorized unit.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.