1. Product Introduction
The LILYGO® ESP32 OLED V3.0 Development Board is a versatile microcontroller board designed for IoT applications, integrating Wi-Fi, Bluetooth, and an OLED display. It is built around the Espressif ESP32 chip, offering powerful processing capabilities and wireless connectivity in a compact form factor.
2. Specifications
| Feature | Description |
|---|---|
| Model Number | ESP32 OLED V3.0 |
| Brand Name | lilygo |
| Main Control Chip | Espressif ESP32 (Tensilica dual-core processor, 240MHz, 600DMIPS, 520 SRAM) |
| Wireless Connectivity | 802.11 b/g/n HT40 Wi-Fi, Bluetooth (dual-mode: traditional and BLE low-power) |
| Flash Memory | 4M Byte (32M bit) |
| Display | 0.96 inch OLED (SSD1306 controller) |
| USB Interface | Type-C USB |
| Power Management | Lithium battery charging circuit and interface |
| Compatible Equipment Style | Display Equipment |
| Origin | Mainland China |
| Certification | NONE |
| Package Dimensions (L x W x H) | 10 cm x 5 cm x 5 cm |
| Package Weight | 0.04 kg |
3. Package Contents
Depending on your purchase option, your package may include the following items:
ESP32 OLED V3.0 Options:
- 1 x ESP32 OLED V3.0 Development Board
- 1 x Battery cable (JST 2pin 1.25mm)
- 2 x Pin headers
T-U2T USB to TTL Options:
- 1 x T-U2T USB to TTL Downloader
ESP32 OLED V3.0 Kit Options:
- 1 x ESP32 OLED V3.0 Development Board
- 1 x Battery cable (JST 2pin 1.25mm)
- 2 x Pin headers
- 1 x T-U2T USB to TTL Downloader
4. Setup and Connection
To begin using your LILYGO® ESP32 OLED V3.0 Development Board, follow these steps for initial setup and connection, especially for program uploading.
4.1 Pinout Diagram
Familiarize yourself with the board's pinout for proper connections to external components.
4.2 Connecting the T-U2T USB to TTL Downloader
The T-U2T automatic downloader is required to upload programs to the ESP32 OLED V3.0 board. This module integrates a USB-to-Serial chip, simplifying the programming process.
- Connect the male end of the T-U2T module to the Type-C USB port on the ESP32 OLED V3.0 board.
- Connect the female end of the T-U2T module to a Type-C cable, which then connects to your computer.
Important: The TX and RX pins in the T-U2T are internally connected. Follow the reference picture for proper connection.
5. Operating Instructions
Once the board is connected via the T-U2T downloader, you can upload your programs using a compatible IDE (e.g., Arduino IDE, PlatformIO). The ESP32 supports various programming languages and frameworks.
- Program Upload: Use the T-U2T module to establish a serial connection for uploading your compiled code.
- Wi-Fi & Bluetooth: Utilize the integrated Wi-Fi and Bluetooth capabilities for network communication and device pairing in your projects.
- OLED Display: The 0.96-inch OLED display can be programmed to show sensor data, status messages, or simple graphics.
For detailed programming examples and libraries, please refer to the official LILYGO GitHub repository:
6. Maintenance
The ESP32 OLED V3.0 Development Board is designed for durability, but proper handling ensures its longevity.
- Keep the board clean and free from dust and moisture.
- Avoid exposing the board to extreme temperatures or direct sunlight.
- Handle with care to prevent damage to components or pins.
7. Troubleshooting
7.1 High Heat During Operation
The ESP32 QFN package is a highly integrated chip. Due to its high frequency and small volume, heat dissipation can be challenging. It is normal for the product to experience high heat during operation. The circuit has undergone stability evaluations, so you can use it with confidence.
7.2 Program Upload Issues
- Ensure the T-U2T USB to TTL downloader is correctly connected to the board and your computer.
- Verify that the correct COM port is selected in your IDE.
- Check that the necessary drivers for the T-U2T module are installed on your computer.
- Refer to the GitHub repository for common issues and community solutions.
8. User Tips
- Essential Downloader: Remember that the T-U2T automatic downloader is crucial for uploading programs to the ESP32 OLED V3.0. Ensure you have this module for development.
- Heat Management: While some heat is normal for the ESP32 chip, ensure adequate ventilation if embedding the board in an enclosure, especially for prolonged high-performance tasks.
- Community Support: The LILYGO GitHub repository is an excellent resource for code examples, technical discussions, and community support.
9. Warranty and Support
For further information, technical support, or to report any issues, please utilize the following resources:
- GitHub Repository: The official repository provides detailed documentation, code examples, and community support. https://github.com/Xinyuan-LilyGO/T96-OLED-SSD1306
- Customer Service: If you have any questions about the product or encounter issues, please contact the seller's customer service for assistance.