KastKing Spartacus / Spartacus Plus

Contents

KastKing Spartacus Baitcasting Reel User Manual

Models: Spartacus, Spartacus Plus

Brand: KastKing

Introduction

Thank you for choosing the KastKing Spartacus Baitcasting Reel. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new fishing reel. By following these guidelines, you will ensure optimal performance and longevity of your Spartacus or Spartacus Plus reel.

For additional information and visual guides, please refer to the official user manual PDF: KastKing Spartacus User Manual (PDF)

Product Features

  • Dual Brake System: Combines a 10-level Magnetic Brake System and a 6-pin Centrifugal Brake System for precise casting control.
  • High Drag Power: Up to 8KG (17.6LB) max drag, supported by Carbon Fiber Washers.
  • Smooth Performance: Equipped with 11+1 Double Shielded Stainless Steel Ball Bearings for effortless retrieves and corrosion resistance.
  • Durable Construction: Features Powerful Precision Brass Gears, a CNC Machined Aluminum Spool, and an Aluminum Handle.
  • Line Guide: Durable Heat Resistant Full Line Guide for efficient heat dissipation and line protection.
  • Handle Knobs: Spartacus Series features High density EVA handle knobs, while Spartacus Plus Series features Hi-grade rubber cork handle knobs.
  • Gear Ratio: 6.3:1 high-speed gear ratio.
  • Weight: Spartacus model weighs 205g, Spartacus Plus model weighs 230g.
  • Line Capacity: 0.285mm/115m.
KastKing Spartacus and Spartacus Plus models with different handle knobs and specifications

Image: Comparison of Spartacus and Spartacus Plus models, highlighting handle knob differences and key specifications.

Specifications

Attribute Value
Brand Name KastKing
Model Number Spartacus/Spartacus Plus
Fishing Reels Type Baitcast Reel
Fishing Method Bait Casting
Gear Ratio 6.3:1
Ball Bearings 11+1
Max Drag Power 8KG (17.6LB)
Spartacus Weight 205 g
Spartacus Plus Weight 230 g
Line Capacity 0.285mm/115m
Brake System Centrifugal & Magnetic Systems (Dual Brake)
Spool Material Aluminum CNC Spool
Handle Choice Right/Left Handed
Material Aluminum (frame, spool, handle)
Baits Type Fake Bait
Position Lake, River, Reservoir Pond, Stream
Exploded view diagram of KastKing Spartacus baitcasting reel components

Image: Exploded view of the reel, showing internal components like the brass drive gear, carbon fiber washers, and ball bearings.

Setup

Choosing Your Reel Hand Orientation

The KastKing Spartacus reel is available in both left-handed and right-handed configurations. This refers to the hand used to turn the handle.

  • Left-handed reel: The handle is on your left side when holding the rod.
  • Right-handed reel: The handle is on your right side when holding the rod.
Diagram illustrating left-handed and right-handed baitcasting reel orientation

Image: Visual guide for selecting left-handed or right-handed reels based on handle position.

How to Spool a Baitcaster

  1. Attach the reel to a rod.
  2. Thread the line through the rod guides and the reel's line guide.
  3. Tie the line to the spool using an arbor knot or a simple overhand knot.
  4. Close the bail (if applicable) or engage the spool.
  5. Maintain tension on the line while reeling it onto the spool. Ensure the line is evenly distributed.
  6. Fill the spool to about 1/8 inch from the rim. Overfilling can cause tangles.
Diagram showing steps for spooling a baitcasting reel

Image: Visual instructions for spooling line onto a baitcasting reel.

How to Set the Drag on a Baitcaster

The drag system allows line to be pulled from the reel when a fish pulls hard, preventing line breakage. Set the drag before fishing.

  1. Attach your line to a stationary object (e.g., a fence post).
  2. Pull the rod tip away from the object, keeping the rod at a 45-degree angle.
  3. Adjust the star drag knob (usually located next to the handle) until line pulls off the spool smoothly with moderate resistance. A common rule of thumb is to set the drag to about 25-30% of your line's breaking strength.

Operating Your Reel

How to Cast a Baitcaster

Baitcasting reels require practice to master. Proper technique and brake settings are crucial to avoid backlashes.

  1. Adjust Spool Tension: With your lure tied on, hold the rod tip up. Press the thumb bar to release the spool. The lure should fall slowly to the ground. If it falls too fast, tighten the spool tension knob. If it doesn't fall, loosen it.
  2. Set Brake System: Start with higher brake settings (e.g., Magnetic Brake Level 5-6, Centrifugal Brake Level 3-4) to prevent backlashes, especially for beginners. Adjust downwards as you gain experience.
  3. Thumb Control: Keep your thumb lightly on the spool during the cast to control line release and prevent overruns.
  4. Casting Motion: Use a smooth, fluid motion. Release your thumb as the rod comes forward, allowing the lure to fly. Immediately apply light thumb pressure as the lure hits the water to stop the spool.

Video: An animated demonstration of the KastKing Spartacus baitcasting reel's features and operation.

Brake System Details

Your Spartacus reel features a sophisticated Dual Brake System for superior casting control:

  • 10-level Magnetic Brake System:
    • Level 0: Ideal for downwind conditions and experienced anglers.
    • Level 1-4: Suitable for casting lures of a certain weight over long distances.
    • Level 5-6: Perfect for a wide variety of lures.
    • Level 7-9: Recommended for beginners ("green hands") and conditions with strong or dead wind.
  • 6-pin Centrifugal Brake System:
    • Level 0: For long distance casting.
    • Level 1-2: For medium-distance casting.
    • Level 3-4: For short distance casting.
    • Level 5-6: For conditions with dead wind.
Diagram explaining the 10-level Magnetic Brake System and 6-pin Centrifugal Brake System settings

Image: Detailed explanation of the magnetic and centrifugal brake settings and their recommended uses.

Maintenance

How to Clean a Baitcaster

Regular cleaning ensures smooth operation and extends the life of your reel.

  1. Rinse: After each use, especially in saltwater, lightly rinse the reel with fresh water. Do NOT spray directly into bearings or drag system.
  2. Wipe Down: Use a soft cloth to wipe down the exterior of the reel, removing any dirt, salt, or debris.
  3. Dry: Allow the reel to air dry completely before storage.
  4. Deep Cleaning (Periodically): For a more thorough cleaning, you may need to disassemble certain parts (e.g., side plate, spool) to clean internal components. Refer to the exploded view diagram for component identification.
Diagram showing tools for cleaning a baitcasting reel

Image: Cleaning tools for baitcasting reels.

Lubrication

Lubricate your reel regularly to maintain smooth performance and prevent wear.

  • Apply a small drop of reel oil to the worm gear.
  • Ensure all moving parts and bearings are clean and lightly lubricated.

Saltwater Use

While the reel is designed with corrosion-resistant components, it is crucial to clean and lubricate it thoroughly after every use in saltwater to prevent damage and extend its lifespan.

Troubleshooting

  • Reel Buzzing During Casting: All baitcasting reels with metal gears and parts can produce some noise. If the buzzing is excessive, ensure the reel and its components are clean and properly lubricated. Apply a drop of oil to the worm gear.
  • Backlashes/Line Tangles: This is common with baitcasters, especially for new users.
    • Ensure your spool tension is correctly set (lure falls slowly when thumb bar is pressed).
    • Increase your magnetic and/or centrifugal brake settings.
    • Practice thumb control on the spool during casting and immediately upon lure impact with water.
  • Drag Not Smooth: Check for debris in the drag washers. Ensure the drag knob is not overtightened or too loose.

User Tips

  • For beginners, start with higher brake settings and gradually reduce them as you become more comfortable with casting.
  • Pair your KastKing Spartacus reel with a casting rod between 6 to 7.5 feet in a medium to medium-heavy action for ideal performance.
  • Regular cleaning and lubrication, especially after saltwater use, are key to maintaining the reel's smooth operation and extending its life.
  • The 11+1 double shielded stainless steel ball bearings provide smooth performance and corrosion resistance.
  • Carbon material in the drag system is more durable, resistant to high temperatures, and lighter than industrial plastic, contributing to powerful drag.

Warranty and Support

KastKing is committed to providing high-quality products. For any questions, concerns, or support needs regarding your Spartacus Baitcasting Reel, please contact KastKing customer service.

For beyond-warranty support or general inquiries, you may contact the manufacturer at: 1-855-830-7400.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.