Tecsun AN-100 / AN-200

Contents

TECSUN AN-100 / AN-200 AM MW Antenna Instruction Manual

Tunable Medium Wave Gain Radio Accessory Antenna

1. Introduction

The TECSUN AN-100 and AN-200 are high-quality tunable AM/MW (Medium Wave) antennas designed to enhance the reception of your radio. These passive loop antennas improve signal strength and clarity, especially in areas with weak reception. Both models offer identical functionality, differing only in their physical appearance.

TECSUN AN-100 and AN-200 AM MW Antennas, showing both models with red loops.
Figure 1: TECSUN AN-100 and AN-200 AM MW Antennas

2. Setup

Setting up your TECSUN AN-100 or AN-200 antenna is straightforward. Follow these steps for optimal performance:

  1. Placement: Position the antenna as close as possible to your radio receiver. The antenna works by inductively coupling with your radio's internal antenna, so proximity is key.
  2. Connection (Optional): While primarily designed for inductive coupling, some radios may benefit from a direct connection if they have an external AM antenna input. Consult your radio's manual for specific connection options.
TECSUN AN-100 antenna placed next to a TECSUN S-2000 radio for enhanced reception.
Figure 2: AN-100 antenna positioned next to a radio

3. Operation

To achieve the best reception with your TECSUN AM/MW antenna:

  1. Tune your Radio: First, tune your radio to the desired AM/MW station.
  2. Tune the Antenna: Slowly turn the tuning knob on the AN-100/AN-200 antenna until the radio broadcast sounds the loudest and clearest. This tunes the antenna to resonate with the frequency of the station, maximizing signal capture.
  3. Adjust Position: Experiment with the antenna's physical position and orientation relative to your radio. Rotating the antenna can help reduce interference and improve signal directionality.
TECSUN AN-100 antenna, a single red loop with a black base and tuning knob.
Figure 3: TECSUN AN-100 Antenna
TECSUN AN-200 antenna, a single red loop with a black arched base and tuning knob.
Figure 4: TECSUN AN-200 Antenna

4. User Tips

  • The AN-100 and AN-200 models are functionally identical; choose based on aesthetic preference.
  • These antennas are specifically designed for AM/Medium Wave reception and do not enhance FM or Shortwave signals.
  • For best results, ensure the antenna is not obstructed by large metal objects or other electronic devices that could cause interference.

5. Specifications

Feature Detail
Brand Name Tecsun
Model Numbers AN-100 / AN-200
Antenna Type AM / Medium Wave Tunable Loop Antenna
Body Material Plastic
Battery Included No
WIFI / Bluetooth No
Screen No
Style Tabletop, Home Radio Accessory
Origin Mainland China

6. Troubleshooting

  • Poor Reception: Ensure the antenna is placed very close to your radio. Adjust the tuning knob slowly and rotate the antenna for optimal signal. Check for nearby electronic devices that might cause interference.
  • No Improvement: Verify that your radio is tuned to an AM/MW frequency. These antennas are not designed for FM or Shortwave.

7. Maintenance

The TECSUN AN-100 and AN-200 antennas require minimal maintenance:

  • Keep the antenna clean by wiping it with a soft, dry cloth.
  • Avoid exposing the antenna to extreme temperatures, humidity, or direct sunlight for prolonged periods.
  • Do not attempt to disassemble the antenna, as this may damage the internal components and void any potential warranty.

8. Warranty and Support

For any questions, technical support, or warranty inquiries, please refer to the contact information provided by your retailer or the official TECSUN website. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.