1. Introduction
Thank you for choosing the Dooya DM35R Tubular Motor. This high-quality motor is designed for motorized rolling blinds and features a built-in 433MHz receiver for remote control and smart home integration. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your tubular motor.

Dooya Tubular Motor DM35R 10/17, designed for motorized curtains with built-in receiver and remote control, compatible with universal smart home hubs.
2. Specifications
| Feature | Specification |
|---|---|
| Model Number | DM35R 10/17 |
| Rolling Speed | 17 r/min |
| Voltage | 220-240V (220/230V) |
| Frequency | 50MHz |
| Wattage | 121W |
| Max Load | 24kg |
| Built-in Receiver | 433MHz |
| Origin | Mainland China |
| Certification | None |

Close-up view of the DM35R 10/17 motor showing its specification label.
3. Package Contents
The package typically includes:
- Dooya DM35R Tubular Motor
- Mounting Brackets
- Remote Control (may be sold separately or as an option)
- User Manual (this document)
4. Safety Information
- Ensure the power supply matches the motor's voltage (220-240V).
- Installation should be performed by a qualified professional or a person with adequate electrical knowledge.
- Keep children and pets away from the motorized blinds during operation.
- Do not operate the motor if any part is damaged.
- Disconnect power before performing any maintenance or adjustments.
5. Installation and Setup
Proper installation is crucial for the optimal performance and longevity of your tubular motor. Refer to the following steps and diagrams.
5.1. Motor Assembly
- Attach the appropriate crown and drive wheel to the motor head.
- Insert the motor into the roller tube. Ensure it fits snugly.
- Secure the motor within the tube using the provided clips or fasteners.

The DM35R 10/17 electrical tubular motor with remote control, suitable for modern living spaces.

Internal view of the silent brushless motor with Herringbone Technology, capable of handling a maximum load of 24kg.
5.2. Mounting the Blinds
- Mount the brackets securely to the wall or ceiling, ensuring they are level and correctly spaced for your roller tube.
- Insert the motor end of the roller tube into its bracket.
- Insert the idler end of the roller tube into its bracket.
- Secure both ends.

Example diagram illustrating recommended installation gaps for multiple blinds (e.g., 2.5CM, 2CM, 2.5CM).
5.3. Electrical Connection
Connect the motor to a 220V/50Hz power supply. Refer to the wiring diagram below. Ensure all connections are secure and insulated.

Wiring diagram for the DM35R -10/17 Tubular Motor, showing 220V/50Hz power connection and handheld remote control.
5.4. Video Guide for Installation
For a visual guide on the installation process, please watch the following video:
Demonstration video showing the installation and basic operation of the tubular motor with roller blinds.
6. Operating Instructions
The Dooya DM35R motor features a built-in 433MHz receiver, allowing control via a compatible remote and integration with smart home systems.
6.1. Remote Control Pairing
To pair your remote control with the motor:
- Ensure the motor is powered on.
- Locate the programming button on the motor or follow the remote's specific pairing instructions.
- Press the programming button on the motor briefly. The motor should respond with a jog (small movement).
- On your remote control, press the 'Up' or 'Down' button. The motor should jog again, confirming successful pairing.
6.2. Setting Upper and Lower Limits
The DM35R motor has mechanical limits. Adjust the limit screws on the motor head to set the desired upper and lower stopping points for your blinds. Turn the screws clockwise to decrease the travel and counter-clockwise to increase it. Test the limits after adjustment to ensure correct operation.
6.3. Smart Home Integration
The motor can work with universal smart home hubs (e.g., BroadLink) that support 433MHz RF control. Refer to your smart home hub's instructions for adding new RF devices and programming the motor's commands.

The motor can be integrated into a smart home system using a compatible hub and controlled via a smartphone application.
7. Maintenance
- Regularly inspect the motor and blind components for any signs of wear or damage.
- Keep the motor free from dust and debris. Use a soft, dry cloth for cleaning.
- Do not lubricate the motor or internal components unless specifically instructed by the manufacturer.
- Ensure the power cable is not pinched or damaged.
8. Troubleshooting
8.1. Motor Not Responding
- Check if the motor is properly connected to the power supply.
- Verify that the remote control has fresh batteries and is within range.
- Re-attempt the remote control pairing process.
- Ensure no obstructions are blocking the blind's movement.
8.2. Blinds Not Stopping at Desired Position
- Re-adjust the upper and lower limit settings on the motor head.
8.3. Unusual Noises During Operation
- Check for any obstructions in the roller tube or blind mechanism.
- Ensure the motor is securely mounted and not vibrating against other surfaces.
- If the noise persists, contact customer support.
9. User Tips
- For optimal smart home integration, ensure your universal hub supports 433MHz RF signals.
- When installing, double-check the tube diameter. The DM35R is typically designed for 35mm diameter tubes.
- If you have multiple blinds, consider labeling your remote control channels for easy identification.
- Regularly check the motor's power connection to prevent accidental disconnections.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.