1. Introduction
This manual provides detailed instructions for the SUNON KDE1209PTVX 9CM 9025 12V 4.4W 4-wire PWM temperature control CPU cooling fan. This fan is designed for efficient cooling of computer cases, CPUs, power supplies, inverters, and various other electronic devices. It is engineered for long-term use, quiet operation, energy efficiency, rapid heat dissipation, and strong airflow. As a core component of active cooling, it effectively forces air movement to remove heat and is widely utilized in computers, servers, and industrial equipment.
2. Specifications
| Feature | Specification |
|---|---|
| Model Number | KDE1209PTVX |
| Fan Size | 90 MM (9 x 9 x 2.5 CM) |
| Voltage | 12V |
| Current | 0.40A |
| Power | 4.4W |
| Fan Speed | 1000 - 4300 RPM ±5% (PWM temperature control) |
| Bearing Type | Magnetic Suspension (MagLev) |
| Power Interface | 4-PIN |
| Line Length | 26 CM |
| Blade Quantity | 7 |
| Used For | Case, CPU Cooling |
| Mounting Hole Distance | Parallel: 7.2 CM, Diagonal: 10.2 CM |
Dimensions


3. Setup and Installation
The 9025 round fan shares the same mounting hole pattern as an 8CM square fan, making it suitable for CPU replacement in compatible systems.
Installation Steps:
- Secure the Fan: First, position and fix the fan securely in the desired location within your computer case or on the CPU heatsink.
- Connect Wiring: The fan uses a 4-wire PWM connector. Connect the red wire to the positive pole and the black wire to the negative pole. The additional wires (yellow, blue) are for PWM control and tachometer feedback, respectively. Ensure the 4-pin connector is correctly aligned and plugged into the corresponding header on your motherboard.

4. Operating Instructions
This fan features Pulse Width Modulation (PWM) for intelligent temperature control, allowing for dynamic speed adjustment based on CPU temperature.
PWM Functionality:
- PWM is a circuit that obtains temperature information directly from the CPU to adjust the fan speed. The fan itself does not contain a temperature measuring device.
- When the system is idle or in standby, the PWM fan can operate at a very low speed with minimal noise. As the CPU temperature rises, the fan speed will increase almost synchronously, providing efficient cooling only when needed. This effectively balances noise levels and cooling performance.
- The actual fan speed will be influenced by factors such as the efficiency of the heatsink and the overall thermal environment of the computer. For example, a CPU with a heat pipe heatsink will generally result in lower fan speeds compared to one with an aluminum heatsink, even with the same fan.
- The temperature control signal originates from the motherboard's temperature circuit. Variations in motherboard temperature measurement and compensation can lead to slight differences in the fan's minimum operating speed across different systems.
5. Maintenance
To ensure optimal performance and longevity of your cooling fan, follow these maintenance guidelines:
- Regular Cleaning: Periodically clean the fan blades and housing to prevent dust buildup, which can impede airflow and reduce cooling efficiency. Use compressed air or a soft brush to gently remove dust.
- Environmental Conditions: Avoid operating the fan for extended periods in humid environments, as this can lead to premature wear or damage.
- Safety Precaution: Never touch the fan blades with your fingers or any objects while the fan is in operation to prevent injury and damage to the fan.
6. Troubleshooting
If you encounter issues with your fan, consider the following common problems and solutions:
- Fan Not Spinning:
- Check if the 4-pin connector is securely plugged into the motherboard header.
- Verify that the red wire (positive) and black wire (negative) are correctly connected.
- Ensure the motherboard is supplying power to the fan header.
- Excessive Noise:
- Inspect the fan blades for any obstructions (e.g., cables, dust buildup).
- Ensure the fan is securely mounted and not vibrating against other components.
- If the fan is old, bearing wear can cause increased noise. Consider replacement if noise persists and the fan has been in use for many years.
- Insufficient Cooling:
- Clean any dust buildup on the fan blades and heatsink fins.
- Ensure proper airflow within the computer case.
- Check CPU temperature readings to confirm if the fan is responding to thermal load (PWM function).
7. User Tips
- Longevity: These fans are known for their durability, with some users reporting over a decade of reliable operation. However, like all mechanical components, they will eventually show signs of wear, such as increased play in the bearings, indicating it might be time for a replacement.
- Optimal Performance: To fully benefit from the PWM temperature control, ensure your motherboard's BIOS/UEFI settings are configured to utilize PWM fan control for the CPU fan header.
- PDF User Manual: For additional details and multi-language instructions, you can refer to the official user manual PDF available at this link.
8. Warranty and Support
This product is covered by the manufacturer's standard warranty. For warranty claims, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty-related requests.