Hantek 6022BE

Contents

Hantek 6022BE Portable USB Digital Oscilloscope User Manual

Model: 6022BE | Brand: Hantek

1. Introduction

The Hantek 6022BE is a compact and portable USB digital storage virtual oscilloscope designed for use with a personal computer. It features two channels, a 20MHz bandwidth, and a 48MSa/s real-time sampling rate, making it suitable for various electronic testing and measurement applications. This manual provides essential information for setting up, operating, and maintaining your device.

2. What's in the Box

Upon unboxing your Hantek 6022BE oscilloscope, you should find the following items:

  • Hantek 6022BE USB Digital Oscilloscope Unit
  • Two Oscilloscope Probes (1:10 attenuation)
  • USB 2.0 Cable (with dual USB-A connectors for power/data)
  • User's Guide / Manual (may be a physical copy or on a CD)
  • Software CD (containing drivers and application software)
  • Small bag of probe accessories (colored rings, probe tips, ground clips)
  • Silica gel packets
Hantek 6022BE Oscilloscope and included accessories

Figure 1: Hantek 6022BE Oscilloscope and included accessories.

Close-up of oscilloscope probes and accessories

Figure 2: Close-up view of the oscilloscope probes and various accessories.

USB 2.0 cable with dual connectors

Figure 3: The included dual-head USB 2.0 cable for connecting the oscilloscope to your PC.

3. Setup

3.1. Hardware Connection

  1. Connect the square-shaped end of the USB cable to the USBXI port on the back of the Hantek 6022BE oscilloscope.
  2. Connect both USB-A ends of the cable to available USB 2.0 ports on your computer. If your computer has USB 3.0 ports, they are generally backward compatible. The dual USB-A connectors ensure sufficient power delivery to the device.
Hantek 6022BE back panel with USBXI port

Figure 4: Back panel of the Hantek 6022BE, showing the USBXI port.

3.2. Software and Driver Installation

It is recommended to download the latest drivers and software directly from the official Hantek website (www.hantek.com) to ensure compatibility, especially for newer operating systems like Windows 10.

  1. Download Drivers: Visit www.hantek.com, navigate to the 'Download' section, and select 'Drivers'. Locate the driver for the 6022BE model (e.g., 'Hantek6022BE Driver') and download the compressed file.
  2. Extract Files: Unzip the downloaded driver package to a memorable location on your computer.
  3. Install Drivers:
    1. Connect the Hantek 6022BE to your PC.
    2. Open 'Device Manager' (search for it in the Windows Start menu).
    3. Look for an 'Unknown Device' or a device with a yellow exclamation mark under 'Other devices' or 'USB devices'.
    4. Right-click on the device and select 'Update driver'.
    5. Choose 'Browse my computer for driver software'.
    6. Navigate to the folder where you extracted the Hantek 6022BE drivers and click 'Next'.
    7. Follow any on-screen prompts to complete the installation.
  4. Download Application Software: From the same 'Download' section on the Hantek website, select 'Application Software'. Download the software corresponding to your 6022BE model (e.g., 'Hantek6022BE Software').
  5. Install Application Software: Run the installer for the application software and follow the instructions.

Video 1: Unboxing and initial setup of the Hantek 6022BE, including driver installation steps.

4. Operating Instructions

4.1. Launching the Software

Once the drivers and software are installed, launch the Hantek oscilloscope application from your desktop or Start menu. The software interface will display a grid, representing the oscilloscope screen.

Hantek oscilloscope software main interface

Figure 5: The main software interface of the Hantek oscilloscope.

4.2. Using the Built-in Test Signal

The Hantek 6022BE includes a built-in 1kHz, 2V peak-to-peak square wave test signal. This is useful for verifying the oscilloscope's functionality and calibrating probes.

  1. Connect one of the oscilloscope probes to Channel 1 (CH1) input on the device.
  2. Connect the probe tip to the 1kHz/2Vpp test signal output terminal (usually a small metal pin next to the BNC connectors) and the ground clip to the ground terminal.
  3. In the software, ensure Channel 1 is enabled. Adjust the vertical scale (Volts/Div) and horizontal scale (Time/Div) to clearly view the square wave. You can also adjust the trigger level and position to stabilize the waveform.
Software displaying 1kHz test signal

Figure 6: Software displaying the built-in 1kHz square wave test signal.

4.3. Connecting External Signals

To measure external signals, connect the oscilloscope probes to the desired test points in your circuit. Ensure proper grounding to avoid noise and inaccurate readings.

  1. Connect the probe tip to the signal point and the ground clip to the circuit's ground.
  2. Select the appropriate channel (CH1 or CH2) in the software.
  3. Adjust the vertical (Volts/Div) and horizontal (Time/Div) scales to fit the waveform on the screen.
  4. Adjust the trigger level and mode (e.g., Edge, Auto) to obtain a stable display of the waveform.
Software displaying a triangle wave

Figure 7: Example of a triangle wave displayed on the oscilloscope software.

Software displaying a sine wave

Figure 8: Example of a sine wave displayed on the oscilloscope software.

Software displaying a PWM signal

Figure 9: Example of a Pulse Width Modulation (PWM) signal displayed on the oscilloscope software.

4.4. Measurements

The software provides various measurement tools, including cursors, to analyze waveforms:

  • Voltage Cursors: Use vertical cursors to measure voltage differences (Delta V) between two points on the waveform.
  • Time Cursors: Use horizontal cursors to measure time differences (Delta T) and frequency between two points on the waveform.
  • Automatic Measurements: The software may offer automatic measurements for parameters like frequency, peak-to-peak voltage, RMS voltage, and duty cycle.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the oscilloscope unit. Do not use abrasive cleaners or solvents.
  • Storage: Store the device in a dry, dust-free environment when not in use.
  • Probe Care: Handle probes carefully. Avoid bending or stressing the cables. Replace damaged probe tips or accessories as needed.

6. Troubleshooting

  • Device Not Detected: Ensure both USB-A connectors of the cable are securely plugged into your PC. Verify that the drivers are correctly installed in Device Manager. Try a different USB port or a powered USB hub if necessary.
  • Software Not Displaying Waveforms: Check probe connections to the device and the circuit. Ensure the correct channel is enabled in the software and that the vertical and horizontal scales are appropriately set for the expected signal. Adjust the trigger level and mode.
  • Noisy or Unstable Waveforms: Ensure proper grounding of the probes. External electrical noise can interfere with readings. Adjust the time base and sample rate settings in the software.
  • AC Signal Interpretation: The Hantek 6022BE does not have AC coupling. If measuring AC signals with a DC offset, the waveform will appear shifted vertically. You may need external AC coupling if precise AC-only measurement is required.
  • Sample Rate Limitations: For very high-frequency signals or signals with significant noise, the 48MSa/s sample rate might show limitations in capturing fine details. Consider adjusting the time base to optimize the displayed samples.

7. Specifications

FeatureSpecification
Brand NameHantek
Model Number6022BE
Bandwidth20MHz
Real Time Sampling Rate48MSa/s
Max Waveform Capture Rate30,000wfm/s
Digital Channels2
Measurements viaUSB Interface
CertificationCE
Battery IncludedNo
IS Battery DemountableNo

8. User Tips

  • Always download the latest drivers and software from the official Hantek website (www.hantek.com) for optimal performance and Windows 10 compatibility.
  • If using with Android devices via USB OTG, ensure you have a high-quality OTG adapter and compatible software like Hscope. Some users report connectivity issues with certain phone models.
  • For automotive diagnostics, this oscilloscope can be useful, especially with appropriate attenuators (e.g., 1:20 or 1:100 probes) for higher voltages. However, some users suggest a 4-channel oscilloscope might be more versatile for automotive applications.
  • Be aware that the device does not have galvanic isolation for the USB, so exercise caution with measurements, especially when dealing with high voltages.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official Hantek website (www.hantek.com). Contact details for customer service can typically be found on the website's 'Service' or 'Contact Us' pages.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.