DOOYA DC2700, DC2702, DC1600, DC1602, DC2760

Contents

Dooya Remote Control Transmitter User Manual

Models: DC2700, DC2702, DC1600, DC1602, DC2760

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Dooya Remote Control Transmitter. These transmitters are designed for convenient control of motorized blinds and shades. Please read this manual thoroughly before use to ensure proper functionality and longevity of your device.

2. Available Models

The Dooya remote control series includes various models, each designed for specific control needs:

  • DC2700 Single-Control Emitter: For controlling a single blind or a group of blinds as one unit.
  • DC2702 15-Channel Control Emitter: Allows control of up to 15 individual blinds or groups of blinds.
  • DC2760 Double-Control Single Channel Remote: Offers double control functionality for a single channel.
  • DC1600 Single-Channel Emitter: A basic single-channel remote with essential functions.
  • DC1602 15-Channel Emitter: Similar to DC2702, providing multi-channel control.
  • DC114B Single-Channel Wireless Receiver: A receiver unit for wireless control.
  • DC1680 Single Channel Wall-Mounted Receiver: A wall-mounted receiver for integrated control.
Dooya DC2700 Single-Control Remote
Figure 2.1: Dooya DC2700 Single-Control Remote
Dooya DC2702 15-Control Remote
Figure 2.2: Dooya DC2702 15-Control Remote
Dooya DC2760 Double Control Single Channel Remote
Figure 2.3: Dooya DC2760 Double Control Single Channel Remote
Dooya DC1600 Single-Channel Emitter
Figure 2.4: Dooya DC1600 Single-Channel Emitter
Dooya DC1602 15-Channel Emitter
Figure 2.5: Dooya DC1602 15-Channel Emitter
Dooya DC1680 Single Channel Wall-Mounted Receiver
Figure 2.6: Dooya DC1680 Single Channel Wall-Mounted Receiver

3. Setup and Installation

3.1. Battery Installation (for Remote Transmitters)

The remote control transmitters require a CR2450 3V battery. Please note that the battery is typically not included due to shipping regulations and must be purchased locally.

  1. Locate the battery compartment on the back of the remote control.
  2. Open the compartment cover.
  3. Insert one CR2450 3V battery, ensuring correct polarity (+/-).
  4. Close the battery compartment cover securely.

3.2. Receiver Installation (DC114B / DC1680)

For receiver units like the DC114B or DC1680, installation typically involves wiring to the motorized blind and a power source. It is recommended that installation be performed by a qualified electrician if you are unfamiliar with electrical wiring.

The DC114B single-channel wireless receiver can connect with a switch, control 1 set motor, and can set inching function. Output: 200W. It can store 20 transmitting channels. Operating temperature: -10°C to +55°C. Suitable for all Dooya wireless emitters. Dimensions: 51 x 51 x 27 mm.

DC114B Receiver Installation Methods
Figure 3.1: DC114B Receiver Installation Methods (Method 1: Flush mount, Method 2: Surface mount)
DC114B Receiver Wiring Diagram with DC1600 Remote
Figure 3.2: DC114B Receiver Wiring Diagram with DC1600 Remote and Wall Switch. Shows 220V/50Hz power input, connection to a double switch, and motor (DM35S, DM45S).

After setting with DC114B, the wall switch can control the roller blinds up and down.

Installation types supported include Built-in, Exterior Installation, Side Installation, and Ceiling Installation.

3.3. Pairing Remote with Receiver/Motor

Specific pairing instructions may vary slightly between models. Generally, the process involves putting the receiver/motor into pairing mode and then sending a signal from the remote.

  1. Ensure the motor/receiver is powered on.
  2. Locate the programming button on your motor or receiver (refer to your motor's specific manual if unsure).
  3. Press and hold the programming button until the motor jogs or beeps, indicating it's in pairing mode.
  4. On your Dooya remote, press the "SET" or "PROGRAM" button (if available) or a combination of buttons as specified in the motor's manual.
  5. The motor should jog or beep again, confirming successful pairing.
  6. For multi-channel remotes (DC2702, DC1602), select the desired channel before pairing.

4. Operating Instructions

Dooya remote controls typically feature intuitive buttons for easy operation:

  • Up Arrow (▲): Moves the blind/shade upwards.
  • Down Arrow (▼): Moves the blind/shade downwards.
  • Stop/Middle Button (–): Stops the blind/shade at its current position.
  • Channel Selection Buttons (< / >): (For multi-channel remotes like DC2702, DC1602) Used to select the desired channel to control. The selected channel number is usually displayed on the remote's screen.
  • SET/PROGRAM Button: Used for pairing and setting limits (refer to motor manual for limit setting).

To control your blinds:

  1. If using a multi-channel remote, select the desired channel using the < or > buttons.
  2. Press the Up Arrow to raise the blinds.
  3. Press the Down Arrow to lower the blinds.
  4. Press the Stop/Middle button to halt the blinds at any desired position.

4.1. Smartphone Control (Optional)

Some Dooya systems can be integrated with smart home platforms for smartphone control. This typically requires an additional "WIFI Intelligent Remote" unit and a dedicated mobile application. Please refer to the documentation for the specific intelligent control unit for setup and operation.

Smartphone controlling motorized roller blinds via a WiFi intelligent remote
Figure 4.1: Smartphone control of motorized roller blinds (requires additional intelligent remote unit).

5. Maintenance

  • Cleaning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Replacement: Replace the CR2450 3V battery when the remote's range decreases or it stops responding.
  • Storage: Store the remote in a dry place, away from direct sunlight and extreme temperatures.
  • Avoid Impact: Do not drop or subject the remote to strong impacts.

6. Troubleshooting

ProblemPossible CauseSolution
Remote not responding
  • Dead or low battery
  • Remote not paired
  • Out of range
  • Obstruction between remote and receiver
  • Replace battery (CR2450 3V).
  • Re-pair the remote with the receiver/motor (see Section 3.3).
  • Move closer to the receiver/motor.
  • Remove any obstructions.
Blinds move in wrong directionMotor limits or direction set incorrectly.Refer to your motor's specific manual for instructions on adjusting limits and direction.
Multi-channel remote controls wrong blindIncorrect channel selected.Ensure the correct channel is selected on the remote before operating.

7. Specifications

FeatureDetail
BrandCOJA BLINDS (Dooya)
Model NumbersDC2700, DC2702, DC1600, DC1602, DC2760 (Transmitters); DC114B, DC1680 (Receivers)
TypeRemote Control Transmitter / Wireless Receiver
MaterialPlastic
Power Supply (Transmitter)3V CR2450 battery (not included)
Service Life of BatteryApprox. 2 years (for DC1600)
Emission Distance200 meters outdoor, 35 meters indoor (for DC1600)
Emission Frequency433.90MHz ± 100KHz (for DC1600)
Max Receivers per Channel20 (for DC1600)
Installation TypeBuilt-in, Exterior Installation, Side Installation, Ceiling Installation
Applicable Window TypeFrench Window
DC114B Receiver Output200W
DC114B Receiver Dimensions51 x 51 x 27 mm
DC1600 Dimensions130mm x 44mm x 10.5mm
Cross-section diagram of a 38mm aluminum alloy tube for blinds, showing dimensions.
Figure 7.1: Example of 38mm aluminum alloy tube cross-section (for compatible blinds).

8. User Tips

  • Channel Management: For multi-channel remotes, label your channels (e.g., "Living Room," "Bedroom 1") to easily identify which blind you are controlling.
  • Battery Life: If you notice a decrease in remote range, it's often the first sign that the battery needs replacement.
  • Motor Manual: Always keep the manual for your specific motorized blinds or shades handy, as it contains crucial information for pairing and setting limits with the Dooya remote.
  • Smart Home Integration: If you plan to integrate with a smart home system, ensure compatibility and follow the instructions for your specific smart hub or intelligent remote unit.

9. Warranty and Support

For warranty information and technical support, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.

For further assistance or if you require an English manual for specific models, please contact the seller.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.