UGREEN 40759

Contents

UGREEN Bluetooth Audio Receiver User Manual

Model: 40759

Brand: UGREEN

1. Product Overview

The UGREEN Bluetooth Audio Receiver (Model 40759) is designed to wirelessly stream audio from your Bluetooth-enabled devices to non-Bluetooth audio systems, such as home stereos, wired speakers, or car audio systems. It features Bluetooth 5.1 technology and supports high-definition audio codecs like aptX HD, aptX, AAC, and SBC, ensuring a high-quality listening experience.

Key Features:

  • Bluetooth 5.1: Provides stable and efficient wireless connection.
  • aptX HD Support: Delivers 24-bit/48KHz audio for superior sound quality (on aptX style models).
  • Dual Connectivity: Connects to two devices simultaneously.
  • Multiple Output Options: Equipped with 3.5mm AUX and 2RCA ports for wide compatibility.
  • Automatic Power-on: Self-starts when power is supplied.
  • Multi-function Button: For easy control of pairing and power.
  • LED Indicator: Provides status updates.

Package Contents:

  • UGREEN Bluetooth Audio Receiver
  • 3.5mm Audio Cable
  • USB-C Charging Cable
UGREEN Bluetooth Audio Receiver with Bluetooth 5.1 and aptX HD logos
UGREEN Bluetooth Audio Receiver (Model 40759)
UGREEN Bluetooth Receiver and 3.5mm Audio Cable
Included accessories: Bluetooth Receiver and 3.5mm Audio Cable.

2. Specifications

AttributeValue
Brand NameUGREEN
Model Number40759
Wireless TypeBluetooth
Bluetooth VersionBluetooth 5.1
Interface Type3.5mm jack & 2RCA ports
SNR (Signal-to-Noise Ratio)>90dB
Bluetooth ProtocolA2DP, AVRCP
Operating Frequency2.400GHz-2.483GHz
Transmission Distance10 meters
Response Frequency20-20KHz
THD (Total Harmonic Distortion)<0.1% (TYP: 0.05%; load: 16R)
Power Supply5V (No built-in battery, requires continuous power)
CertificationCE, FCC, RoHS, SRRC, UKCA, KCC, BQB, TELEC

Audio Codec Support:

Qualcomm aptX HD explanation: 24-bit music quality over Bluetooth
Qualcomm aptX HD provides high-definition 24-bit music quality.
Comparison table of Standard vs. aptX style Bluetooth receivers
Comparison of available styles and their features.

3. Setup and Connection

The UGREEN Bluetooth Audio Receiver is designed for easy setup. Please ensure your audio system has either a 3.5mm AUX input or RCA (Red/White) input ports.

Step-by-Step Connection:

  1. Power the Receiver: Connect the provided USB-C charging cable to the receiver's IN 5V port and plug the other end into a 5V USB power source (e.g., a USB wall adapter, a USB port on your audio system, or a power bank). The receiver will automatically power on.
  2. Connect to Audio System:
    • For 3.5mm AUX input: Use the included 3.5mm audio cable to connect the receiver's AUX output to your audio system's 3.5mm AUX input.
    • For RCA input: Use an RCA cable (not always included, check package contents) to connect the receiver's L-AUDIO-R (Red/White) outputs to your audio system's corresponding RCA inputs.
  3. Enter Pairing Mode: The receiver will automatically enter pairing mode when powered on for the first time, indicated by a blinking LED. If it's not blinking, press and hold the multi-function button for a few seconds until the LED blinks rapidly.
  4. Pair with Your Device:
    • On your smartphone, tablet, or other Bluetooth-enabled device, go to Bluetooth settings.
    • Search for available devices. The receiver will appear as "UGREEN-40759E" or similar.
    • Select the receiver to pair. Once connected, the LED indicator will turn solid blue or green (depending on model/status).
  5. Play Audio: Select the correct input source (AUX or RCA) on your audio system and start playing music from your paired device.
Easy to Use diagram showing 3.5mm Audio jack, RCA Audio jack, Multi-function Button, USB-C Charging Port, and LED indicator.
Diagram of the receiver's ports and controls.
Wide Compatibility diagram showing connection to Amplifier via 2RCA and Wired Speaker via 3.5mm.
Connection examples for various audio systems.

Connecting a Second Device:

This receiver supports connecting two Bluetooth devices simultaneously. After connecting the first device:

  1. On the first connected device, temporarily disconnect from the receiver (do not unpair).
  2. Put the receiver back into pairing mode (if it doesn't automatically, press and hold the multi-function button).
  3. Pair the second device following the steps above.
  4. Once the second device is paired, reconnect the first device from its Bluetooth settings.
  5. The receiver will now be connected to both devices. Audio will play from the device that starts streaming first.

Product Demonstration Video:

A short video demonstrating the UGREEN Bluetooth receiver's connection and pairing process.

4. Operation

Multi-function Button:

  • Power On/Off: Press and hold for approximately 3 seconds.
  • Enter Pairing Mode: When powered on, press and hold for approximately 5 seconds until the LED blinks rapidly.
  • Play/Pause: Short press during music playback.

LED Indicator:

  • Rapid Blinking: Device is in pairing mode.
  • Solid Blue/Green: Device is successfully connected to a Bluetooth source.
  • Slow Blinking: Device is connected but not actively playing audio, or waiting for connection.

Factory Reset:

If you experience persistent connection issues or wish to clear all paired devices, you can perform a factory reset. The exact procedure may vary slightly, but typically involves:

  1. Ensure the device is powered on.
  2. Press and hold the multi-function button for an extended period (e.g., 8-10 seconds) until the LED indicator shows a specific pattern (e.g., flashes red and blue, or turns off and on).
  3. Release the button. The device should then restart in pairing mode.

5. Troubleshooting

  • No Sound:
    • Ensure the receiver is properly powered and the LED indicates a successful Bluetooth connection.
    • Verify that your audio system is set to the correct input source (AUX or RCA).
    • Check the volume levels on both your source device and your audio system.
    • Ensure cables are securely connected.
  • Cannot Pair Device:
    • Make sure the receiver is in pairing mode (LED blinking rapidly).
    • Turn off Bluetooth on other nearby devices that might be trying to connect.
    • Try restarting both the receiver and your source device.
    • Perform a factory reset on the receiver.
  • Poor Sound Quality / Background Noise:
    • Ensure your source device supports aptX HD/aptX for the best quality (if using an aptX style receiver).
    • Move the receiver closer to your source device to improve signal strength.
    • Avoid placing the receiver near other wireless devices (Wi-Fi routers, microwaves) that might cause interference.
    • Some users report minimal background noise with certain setups; ensure high-quality audio cables are used.
  • Audio Latency (Delay):
    • While aptX HD/aptX significantly reduces latency, some minimal delay can still occur, especially with video. This is inherent to Bluetooth audio transmission.
  • Limited Range:
    • The maximum transmission distance is 10 meters (33 feet) in an open environment. Walls, furniture, and other obstacles can reduce this range.
    • Ensure there are no major obstructions between the receiver and your source device.
  • Device Does Not Turn Off Automatically:
    • This model does not feature an auto-off function when idle. It requires continuous power and will remain on unless manually powered off or the power source is disconnected.
  • No Built-in Battery:
    • This device does not have an internal battery and requires a continuous 5V power supply via its USB-C port to function.

6. User Tips

  • For optimal audio quality, especially with the aptX style receiver, ensure your transmitting device (smartphone, tablet) also supports aptX HD or aptX codecs.
  • The receiver can connect to two devices simultaneously, allowing for seamless switching between audio sources.
  • The device powers on automatically when connected to a power source, making it convenient for use in cars or home systems where power is supplied upon ignition or system activation.
  • When connecting to a power amplifier, some users find the output level to be strong, requiring volume adjustment on the amplifier.
  • If using in a car, ensure the power supply is stable to avoid interruptions.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid Damage: Do not drop, disassemble, or attempt to repair the device yourself. This may void the warranty.

8. Warranty and Support

UGREEN products come with a standard warranty. For detailed warranty information, technical support, or service inquiries, please refer to the official UGREEN website or contact their customer service directly.

A comprehensive user manual in PDF format is also available for download. You can find it by searching for 'Item guides & documents' on the product page or by visiting the UGREEN support section.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.